Sodium Tetraphenylborate Solution
- Part number
- RXSOL-60-6266-500
- Category
- Lab Chemical
- Brand
- RXSOL
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6266-500 |
| Product Type | Sodium Tetraphenylborate Solution |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Aluminum Hydroxide | CAS# 21645-51-2 | 1 - 2% | W/V |
ACGIH TWA 2 mg (Al)/mƒ |
| Sodium Hydroxide | CAS# 1310- 73-2 | <0.1% | W/V |
OSHA PEL 2 mg/mƒ ACGIH 2mg/mƒ |
| Sodium Tetraphenyl | CAS# 143-66-8 | 0.5 - | W/V |
OSHA TWA 10 mg/mƒ |
| Water, Deionized ASTM Type II | CAS# 7732- 18-5 | Balance | V/V |
None Established |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
|
SKIN: |
Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention. |
|
| EYES: |
Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. |
|
| INHALATION: |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
|
| INGESTION |
If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person. |
|
Fire Extinguisher Type: |
Any means suitable for extinguishing |
| Fire / Explosion Hazards: | |
| Fire Fighting Procedure: |
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.
Wash thoroughly after handling. Remove contaminated clothes and wash before reuse. Use with adequate ventilation.
|
Respiratory Protection |
None required |
| Ventilation | Local |
| OTHER | Mechanical |
|
Protective Gloves |
Wear appropriate gloves to prevent skin exposure |
| EYE PROTECTION | Splash Goggles |
| Other Protective Equipment |
Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | >95°C |
| VAPOR PRESSURE | Information not available |
| MELTING POINT | <2°C |
| VAPOR DENSITY | Information not available |
| EVAPORATION RATE | Information not available |
| Appearance /Odors | Clear odorless liquid |
| Flash Point | not flammable |
| Specific Gravity | Information not available |
| Percent Volatile by | >95% |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air |
Not applicable |
| Upper Flamm. Limit in Air | Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Avoid contact with incompatible materials. |
|
MATERIALS TO AVOID |
Strong reducing agents |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Oxides of Carbon, Boron and Sulfur |
|
HAZARDOUS POLYMERIZATION |
not expected to occur |
| Conditions to Avoid | None known |
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Danger! Toxic, Harmful if inhaled. Harmful if swallowed. Irritating to eyes, respiratory system and skin. In case of contact flush with water for at least 15 minutes. In case of eye, skin contact or if ingested, seek medical attention.
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 8/2/2010 |
0.1 updated msds to 16 section from 10 section msds. STN |
| 0 |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Sodium Tetraphenylborate Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Tetraphenylborate Solution at a competitive price from us. We have ready stock of Sodium Tetraphenylborate Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
