RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,082 products across 97 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Automobiles

T-RUST Safe Rust Remover

very fast rust disssolving action and formulation. This product is safer then harash acid and based on glycol, So After cleaning neutralization not require like other grades of RUST REMOVER, Simply surface can be flush / rinse with water.
Part number
RXSOL-41-8741-025
Category
Automobiles
Brand
RXSOL
T-RUST Safe Rust Remover

Overview

Eco Friendly and Environmentally Sound Rust Remover, Which have very fast rust disssolving action and formulation. This product is safer then harash acid and based on glycol, So After cleaning neutralization not require like other grades of RUST REMOVER, Simply surface can be flush / rinse with water. 

Technical specifications

Specifications of T-RUST Safe Rust Remover
Boiling Point (oF)12º F
Vapor Pressure (mmHg.)N/A
Vapor Density (AIR=1)Heavier than air
Solubility in Water100%
Specific Gravity(H2O=1)1.01
Percent Volatile by VolumeN/A
PH (1% Solution)4.5
Appearance & OdorLiquid, non-viscous, faint sweet odor

Applications

Dilution Ratio: Ready to use.

Its balanced pH formulation makes it easy to use at home. It is also effective for many mineral based soils such as metal stains, water stains and rings. Even removes mineral scale and hard water stains from many hard surfaces.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name

T-RUST

Product Type RXSOL-41-8741-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540
Fax +91 22 2781 1318 :
Email 123@rxmarine.com

INGREDIENTS :                                                                                  Oral LD              TLV                 %
Ammonium Hydrogen Fluoride (CAS #1341-49-7)                     300 mg/kg          35 ppm           5
Dipropylene Glycol Monomethyl Ether                                           5.4 mg/kg          100 ppm          5
(CAS #34590-94-8)

Route(s) of entry
Health Hazards:
Carcinoginicity:

Eyes? Yes Skin? Yes Inhalation? Yes Ingestion? Yes
Eyes –May cause irritation.
Skin –May cause irritation.
Inhalation –May cause coughing, sneezing & other more severe irritations.
Ingestion – Will cause irritation to mucous membranes of the mouth & throat. Swallowing will cause severe burning of throat, esophagus and digestive tract accompanied by severe pain, vomiting and collapse.
Note: Repeated exposure to fluoride containing products may cause fluoride poisoning which may cause death
NTP? No OSHA? No IARC Monograph? No

Eyes: Flush with water for 20-30 minutes. Get medical attention
Skin: Flush with water for 15 minutes. Get medical attention. Remove contaminated clothing.
Inhalation: Move to fresh air. Give artificial respiration if not breathing. Get immediate medical attention
Ingestion: Do not induce vomiting. Give large quantities of water. Get immediate medical attention

Flash Point: Non-Flammable
ExtinguishingMedia: Use whatever is appropriate for surrounding materials involved in fire
Special Fire Fighting Procedures: Wear self contained breathing apparatus. Protective clothing for skin and eye protection should be worn.
Unusual Fire and Explosion Hazards: None known.
Stability: Stable.
Chemical Incompatibility: Strong acids or alkalize
Hazardous Decomposition or Byproducts: Thermal decomposition causes liberation of HF & NH3.
Contact with bases causes liberation of NH3 and with acids, HF
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Excessive heat and contamination of any kind

Contain with chemical absorbent material. Do not dispose of on the land, in surface waters, or in storm drains. Small spills and waste may be flushed into a waste treatment sewer where local regulations permit. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations. All disposal must be in accordance with all federal, state and local regulations.
 

Respiratory Protection: Use a NIOSH/MSHA approved respirator.
Protective Clothing: Rubber gloves recommended.
Eye Protection :Safety goggles recommended.
Ventilation: Use with adequate ventilation - avoid prolonged exposure to vapors.
Storage: Store in a cool dry place (above freezing point), away from incompatible materials. Store in tightly closed container when not in use.

Boiling Point (oF)  212º F
Vapor Pressure (mmHg.) N/A
Vapor Density (AIR=1)  Heavier than air

Solubility in Water

100%
Specific Gravity(H2O=1) 1.01
Percent Volatile by Volume N/A
PH (1% Solution) 4.5

Appearance & Odor

Liquid, non-viscous, faint sweet odor

 

While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty Users must determine safe conditions for use and assume liability for any loss, injury, damage or expense resulting from use of this product.

N/A = Not applicable N/D = Not determined N/E = Not established

Product Name

T-RUST

Product Type RXSOL-41-8741-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email rxsolchemicals@gmail.com

INGREDIENTS :                                                                         Oral LD              TLV                 %
Ammonium Hydrogen Fluoride (CAS #1341-49-7)                     300 mg/kg          35 ppm           5
Dipropylene Glycol Monomethyl Ether                                        5.4 mg/kg          100 ppm          5
(CAS #34590-94-8)

Route(s) of entry
Health Hazards:
Carcinoginicity:

Eyes? Yes Skin? Yes Inhalation? Yes Ingestion? Yes
Eyes –May cause irritation.
Skin –May cause irritation.
Inhalation –May cause coughing, sneezing & other more severe irritations.
Ingestion – Will cause irritation to mucous membranes of the mouth & throat. Swallowing will cause severe burning of throat, esophagus and digestive tract accompanied by severe pain, vomiting and collapse.
Note: Repeated exposure to fluoride containing products may cause fluoride poisoning which may cause death
NTP? No OSHA? No IARC Monograph? No

Eyes: Flush with water for 20-30 minutes. Get medical attention
Skin: Flush with water for 15 minutes. Get medical attention. Remove contaminated clothing.
Inhalation: Move to fresh air. Give artificial respiration if not breathing. Get immediate medical attention
Ingestion: Do not induce vomiting. Give large quantities of water. Get immediate medical attention

Flash Point: Non-Flammable
ExtinguishingMedia: Use whatever is appropriate for surrounding materials involved in fire
Special Fire Fighting Procedures: Wear self contained breathing apparatus. Protective clothing for skin and eye protection should be worn.
Unusual Fire and Explosion Hazards: None known.
Stability: Stable.
Chemical Incompatibility: Strong acids or alkalize
Hazardous Decomposition or Byproducts: Thermal decomposition causes liberation of HF & NH3.
Contact with bases causes liberation of NH3 and with acids, HF
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Excessive heat and contamination of any kind

Contain with chemical absorbent material. Do not dispose of on the land, in surface waters, or in storm drains. Small spills and waste may be flushed into a waste treatment sewer where local regulations permit. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations. All disposal must be in accordance with all federal, state and local regulations.
 

Respiratory Protection: Use a NIOSH/MSHA approved respirator.
Protective Clothing: Rubber gloves recommended.
Eye Protection :Safety goggles recommended.
Ventilation: Use with adequate ventilation - avoid prolonged exposure to vapors.
Storage: Store in a cool dry place (above freezing point), away from incompatible materials. Store in tightly closed container when not in use.

Boiling Point (oF)  212º F
Vapor Pressure (mmHg.) N/A
Vapor Density (AIR=1)  Heavier than air

Solubility in Water

100%
Specific Gravity(H2O=1) 1.01
Percent Volatile by Volume N/A
PH (1% Solution) 4.5

Appearance & Odor

Liquid, non-viscous, faint sweet odor

 

While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy. BRIDGEPOINT SYSTEMS MAKES NO WARRANTY WITH RESPECT HERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON. Users must determine safe conditions for use and assume liability for any loss, injury, damage or expense resulting from use of this product.

N/A = Not applicable N/D = Not determined N/E = Not established

Request the signed SDS as PDF

Availability

T-RUST Safe Rust Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of T-RUST Safe Rust Remover at a competitive price from us. We have ready stock of T-RUST Safe Rust Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches