TALC FINE POWDER LR
- Part number
- RXSOL-60-6605-642
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Talc in powdered form, often combined with corn starch, is used as baby powder. This mineral is used as a thickening agent and lubricant; is an ingredient in ceramics, paint, and roofing material; and is a main ingredient in many cosmetics.
Applications
As a powder, it absorbs moisture well and helps cut down on friction, making it useful for keeping skin dry and helping to prevent rashes. It is widely used in cosmetic products such as baby powder and adult body and facial powders, as well as in a number of other consumer products.
Characteristics and notes
The adhesive interactions in talc are strong enough to overcome the unfavorable entropy, and water adsorbs strongly on talc surfaces. However, they are too weak to overcome the cohesive interactions, and water thus beads up on talc surfaces. Surprisingly, even talc-like surfaces that are highly adhesive do not fully wet at saturation. Instead, a water droplet forms on top of a strongly adsorbed monolayer of water.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|
| Product Type | TALC FINE POWDER LR | |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation: Talc
CAS No :14807-96-6
Substance.
Substance name Contents CAS No
Talc: 100 % 14807-96-6
Contains no other components or impurities which will influence the classification of theproduct.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : Xn; R22 Xi; R36/37/38
Hazard Class and Category Code(s),
Regulation (EC) No 1272/2008 (CLP)
Health hazards : Specific Target Organ
Toxicity irritationCategory 3-- Single exposure
Warning (CLP : STOT SE 3) H335 Skin irritationCategory
2 Acute toxicity, Oral-- Warning (CLP : Skin Corr. 2) H315
Category 4-- R espiratory tract Warning (CLP : Acute Tox. 4) H302
Eye irritationCategory 2AWarning (CLP : E
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Symbol(s) : Xn : Harmful
R Phrase(s) ye Irrit. 2) H319 : R22 : Harmful if swallowed.
R36/37/38 : Irritating to eyes, respiratory system and skin.
S Phrase(s) and seek : S26 : In case of contact with eyes, ri medical advice.
S36 : Wear suitable protective clothing
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms
Signal words: Warning
Hazard statements: H302 : Harmful if swallowed.
H319 : Causes serious eye irritation.
H315 : Causes skin irritation.
H335 : May cause respiratory irritation.Precautionary statements
• Prevention: P280: Wear protective gloves, protective clothing, eye protection, faceprotection.
P271: Use only outdoors or in a well-ventilated area.P261: Avoid breathing dust, fume, gas, mist, vapours, spray.
P264: Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
• Response: P302+P352: IF ON SKIN : Wash with plenty of soap and water.
P301+P312: IFSWALLOWED : Call a POISON CENTER or doctor if you feelunwell.
P332+P313: If skin irritation occurs : Get medical advice.
P305+P351+P338: IF IN EYES : Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340: IF INHALED : Remove to fresh air and keep at rest in a positioncomfortable for breathing.
P363: Wash contaminated clothing before reuse.
• Storage: P403+P233: Store in well-ventilated place.
Keep container tightly closed.P405: Store locked up.
• Disposal considerations: P501: Dispose of this material and its container to hazardousor
special wastecollection point, in accordance with local, regional, national and/orinternationalregulation.
3.3. Other hazards
Other hazards: Thesubstance does not fulfil the criteria to be identified as PBT
substance or vPvBsubstance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation: Call a POISON CENTER or doctor if you feel unwell.
Remove to fresh airand keepat rest in a position comfortable for breathing.
Skin contact: If skin irritation occurs : Get medical advice.
Specific treatment (see onthis label).Wash with plenty of soap and water.
Wash contaminated clothing beforereuse.Eye contact: Get medical advice
. If eye irritation persists : Remove contact lenses, ifpresent andeasy to do.
Continue rinsing. Rinse cautiously with water for several minutes.
Ingestion: Obtain emergency medical attention. Call a POISON CENTER
or doctor ifyou feelunwell. Do NOT induce vomiting. Rinse mouth.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use: Swallowing a small quantity of this material will
result inserious health hazard.Causes serious eye irritation.Causes skin irritation. May causerespiratory irritation.
4.3. Indication of any immediate medical attention and special treatment needed
General information: Never give anything by mouth to an unconscious person.
If youfeel unwell, seekmedical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media: Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media: Do not use a heavy water stream.
Surrounding fires: Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products: Under fire conditions, hazardous fumes will bepresent.
5.3. Advice for fire-fighters
Protection against fire: Do not enter fire area without proper protective equipment
,including respiratoryprotection.
Special procedures: Exercise caution when fighting any chemical fire
. Avoid (reject)fire-fighting water toenter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders: Equip cleanup crewwith proper protection.Ventilate area.
For non-emergency personnel: Evacuate unnecessary personnel.
6.2. Environmental precautionsEnvironmental precautions: Prevent entry to sewers and public waters.
Notifyauthorities if product enterssewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods: Soak up spills with inert solids, such as clay or diatomaceous
earthas soon aspossible. Collect spillage. Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling: Wash thoroughly after handling.
Do not eat, drink or smoke when using thisproduct.
Wash thoroughly after handling. Use only outdoors or in a well-ventilatedarea.
Technical protective measures: Provide good ventilation in process area to preventformation of vapour.
Special precautions: Avoid breathing dust, fume, gas, mist, vapours, spray.
7.2. Conditions for safe storage, including any incompatibilities
Storage: Keep only in the original container in a cool, well ventilated place.
Keepcontainertightly closed.
Storage-away from: Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s): None.
8.1. Exposure controls
Personal protection: Avoid all unnecessary exposure.
• Respiratory protection: Wear approved mask.
• Hand protection: Wear protective gloves.
• Skin protection:Wear suitable protective clothing.
• Eye protection: Chemical goggles or safety glasses.
• Others: When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits: No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C: Solid.
Odour threshold: No data available.
pH value: No data available.
Melting point [°C]: 1000°C
Decomposition point [°C]: N/A
Critical temperature [°C]: N/A
Auto-ignition temperature [°C]: N/A
Flammability (solid, gas): N/A
Flash point [°C]: N/A
Boiling point [°C]: N/A
Initial boiling point [°C]: N/A
Final boiling point [°C]: N/A
Evaporation rate: N/A
Vapour pressure [20°C]: N/A
Vapour pressure mm/Hg: N/A
Vapour density: N/A
Density [g/cm3]: 2,7Relative density, gas (air=1): N/A
Relative density, liquid (water=1): N/A
Solubility in water [% weight]: Insoluble in waterSolubility in water: N/A
Log Pow octanol / water at 20°C: No data available.
Solubility: N/A
Viscosity at 40°C [mm2/s]: N/A
9.2. Other information
Explosive properties: N/A
Explosion limits-upper [%]: N/A
Explosion limits-lower [%]: N/A
Oxidising properties: No data available.
10.1. Reactivity
Reactivity: Not established.
10.2. Chemical stability
Chemical stability: Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Not established.
10.4. Conditions to avoid
Conditions to avoid: Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid: Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products: Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effectsAcute toxicity
• Inhalation: Based on available data, the classification criteria are not met.
• Dermal: Based on available data, the classification criteria are not met.
• Ingestion: Harmful if swallowed.
Corrosion: Based on available data, the classification criteria are not met.
Irritation: Causes serious eye irritation.
Causes skin irritation.May cause respiratoryirritation.
Sensitization: Based on available data, the classification criteria are not met.
Mutagenicity: Based on available data, the classification criteria are not met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Toxic for reproduction: Based on available data, the classification criteria are not met.
STOT-single exposure: Based on available data, the classification criteria are not met.
STOT-repeated exposure: Based on available data, the classification criteria are not met.
Aspiration hazard: Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information: Not established.
12.2. Persistence-degradability
Persistence-degradability: Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: Not established.
12.4. Mobility in soil
Mobility in soil: Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment: The substance does not fulfil the
criteria to beidentified as PBT substance or vPvBsubstance according to
Annex XIIIof RegulationREACH.
12.6. Other adverse effects
Environmental precautions: Avoid release to the environment.
13.1. Waste treatment methods
General: Avoid release to the environment.
Dispose in a safe manner in accordance withlocal/national regulations.
Dispose of this material and its container to hazardous orspecial waste
collectionpoint, in accordance with local, regional, national and/orinternational regulation.
14.1. Land transport (ADR-RID)
General information: Not regulated.
14.2. Sea transport (IMDG) [English only]
General information: Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information: Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for thesubstance or mixture
Safety, health and environmental: Ensure all national/local regulations are observed.
regulations/legislation specific for thesubstance or mixture
REACH Restrictions-Annex XVII: The components of this product are not subject torestrictions.
REACH Authorisation-Annex XIV: The components of this product are not subjectto authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment: It has not been carried out.
Abbreviations and acronyms: PBT: persistent, bioaccumulative and toxic.vPvB: very persistent and very bioaccumulative
Sources of key data used: REGULATION (EC) No 1272/2008 OF THE EUROPEANPARLIAMENT AND OF THE COUNCIL
of 16 December 2008 on classification,labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006Further information: None.In accordance with REACH
Regulation (CE) Nº 1907/2006 and with CLP Regulation(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
TALC FINE POWDER LR manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
TALC FINE POWDER LR is available in small packing as well as in bulk. Buy premium quality TALC FINE POWDER LR and other lab chemicals from one of the most trusted brands.
