RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,087 products across 101 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Solvent Chemicals

TETRA HYDRO FURAN

Part number
RXSOL-19-1445-210
Brand
RXSOL
TETRA HYDRO FURAN

Technical specifications

TETRA HYDRO FURAN
Test Results

Purity

99.95 - 100.00
Water
<= 100.00
Colour
<= 10

Applications

PRODUCT NAME      : TETRAHYDROFURAN      
CAS number         : 109-99-9
UN number        : 2056
Formula    : (C2H4)2O
Odour         : ETHER LIKE
Solubility in water         : APPRECIABLE
Density     : 0.888   at 20 oC
Boiling point       : 66 oC
Melting point          :  -108oC
Viscosity     :  
Flashpoint              : -15 oC
Explosive limits     : 2.0 – 11.8 Vol%
Vapour pressure       : 200 mbar at 20 oC
Skin absorption/irritation    : YES
TLV       Country  NL              Year  1995      : 100 ppm               300      mg/m3
Pollution category    1994    :  D

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Product Name RXSOL-19-1445
Product Type   TETRA HYDRO FURAN

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

Chemical Name

CAS Number

EC Number

Index number

tetrahydrofuran

109-99-9

203-726-8

603-025-00-0

Hazard description:
Information concerning particular hazards for human and environment:
R 11 Highly flammable.
R 19 May form explosive peroxides.
R 36/37 Irritating to eyes and respiratory system.

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.If symptoms persist, consult a doctor.

After swallowing

If symptoms persist consult doctor.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: No special measures required.

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system. Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Ensure adequate ventilation.

Handling:
Information for safe handling: Open and handle receptacle with care.
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
109-99-9 tetrahydrofuran

PEL (USA)

REL (USA)

TLV (USA)
WEL (Great Britain)


590 mg/m³, 200 ppm
Short-term value: 735 mg/m³, 250 ppm
Long-term value: 590 mg/m³, 200 ppm
Short-term value: 295 mg/m³, 100 ppm
Long-term value: 147 mg/m³, 50 ppm
Skin
Short-term value: 300 mg/m³, 100 ppm
Long-term value: 150 mg/m³, 50 ppm
Skin
Short-term value: 300 mg/m³, 100 ppm
Long-term value: 150 mg/m³, 50 ppm
Sk

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes.Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

General Information

Form

Fluid

Colour

Colourless

Odour

Ether-like

Change in condition

Melting point/Melting range

-108.5°C

Boiling point/Boiling range

65.5°C

Flash point

-21 - ca°C

Ignition temperature 230°C

Danger of explosion

May form explosive peroxides.

Explosion limits:
Lower 1.5 Vol %
Upper 12 Vol %
Vapour pressure at 20°C 200 hPa
Density at 20°C 0.8892 g/cm³
Solubility in / Miscibility with water Fully miscible.

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

LD50

2500 mg/kg (rat)

Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.

General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Product:
Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable liquids.
  Danger code (Kemler) 33
  UN-Number 2056
  Packaging group II
  Hazard label 3
  Description of goods 2056 TETRAHYDROFURAN
Maritime transport IMDG
  IMDG Class 3
  UN Number 2056
  Label 3
  Packaging group II
  EMS Number F-A,S-D
  Marine pollutant No
  Proper shipping name TETRAHYDROFURAN
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 2056
  Label 3
  Packaging group II
  Proper shipping name TETRAHYDROFURAN

• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
• Risk phrases:
11 Highly flammable.
19 May form explosive peroxides.
36/37 Irritating to eyes and respiratory system.
• Safety phrases:
2 Keep out of the reach of children.
16 Keep away from sources of ignition - No smoking.
29 Do not empty into drains.
33 Take precautionary measures against static discharges.

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

TETRA HYDRO FURAN manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of TETRA HYDRO FURAN at a competitive price from us. We have ready stock of TETRA HYDRO FURAN in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches