TETRA PROPYL AMMONIUM BROMIDE LR
- Part number
- RXSOL-60-6605-675
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Tetrapropylammonium bromide is a quarternary ammonium bromide salt in which the cation has four propyl substituents around the central nitrogen. It has a role as a potassium channel blocker. It is a bromide salt and a quaternary ammonium salt. It contains a tetrapropylammonium.
Applications
Tetrapropylammonium bromide (TPAB) is a quarternary ammonium bromide salt in which the cation has four propyl substituents around the central nitrogen. TPAB is commonly used as a phase transfer catalyst. Applications for Tetrapropylammonium Bromide (TPAB): Structure Directing Agent for Zeolite Synthesis.
Characteristics and notes
TPAB is commonly used as a phase transfer catalyst. Applications for Tetrapropylammonium Bromide (TPAB): Structure Directing Agent for Zeolite Synthesis. Phase Transfer Catalyst in the Pharmaceutical Industry.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|
| Product Type | TETRAPROPYL AMMONIUM BROMIDE LR | |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation: TETRAPROPYL AMMONIUM BROMIDE EXTRA PURE
CAS No :1941-30-6
Substance.
Contains no other components or impurities which will influence the classification of theproduct.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : Xi; R36/37/38 Hazard Class and Category Code(s), Regulation (EC) No 1272/2008
(CLP) Health hazards : Specific Target Organ Toxicity irritationCategory 3-- S
ingle exposure Warning (CLP : STOT SE 3) H335
Eye irritationSkin irritation Category 2ACategory 2
3.2. Label elements
Labelling EC 6-- Warning (CLP : Eye Irrit. 2) H319
Warning (CLP : Skin Corr. 2) H315 7/548 or EC 1999/45
Symbol(s) : Xi : Irritant
R Phrase(s)Respiratory tract : R36/37/38 : Irritating to eyes, respiratory system and skin.
S Phrase(s) and seek : S26 : In case of
contact with eyes, rinse immediately with plenty of water medical advice.
S36 : Wear suitab le protective clothing.
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms
Signal words: Warning
Hazard statements: H319 : Causes serious eye irritation.
H315 : Causes skin irritation.
H335 : May cause respiratory irritation.Precautionary statements
• Prevention: P280: Wear protective gloves, protective clothing, eye protection, faceprotection.
P271: Use only outdoors or in a well-ventilated area.
P261: Avoid breathing dust, fume, gas, mist, vapours, spray.
P264: Wash thoroughly after handling.
• Response: P302+P352: IF ON SKIN : Wash with plenty of soap and water.
P332+P313: If skin irritation occurs : Get medical advice.
P305+P351+P338: IF IN EYES : Rinse cautiously with water for several minutes.Remove contact lenses
, if present and easyto do. Continue rinsing.
P304+P340: IF INHALED : Remove to fresh air and keep at rest in a positioncomfortable for breathing.
P363: Wash contaminated clothing before reuse
.• Storage: P403+P233: Store in well-ventilated place.
Keep container tightly closed.P405: Store locked up.
• Disposal considerations: P501: Dispose of this material and its container to hazardousor
special wastecollection point, in accordance with local, regional, national and/orinternationalregulation.
3.3. Other hazards
Other hazards: The substance does not fulfil the criteria to be identified as PBT
substance or vPvBsubstance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation: Call a POISON CENTER or doctor if you feel unwell.
Remove to fresh airand keepat rest in a position comfortable for breathing.
Skin contact: If skin irritation occurs : Get medical advice.
Specific treatment (see onthis label).Wash contaminated clothing before reuse. Wash with plenty of soap andwater.
Eye contact: Rinse cautiously with water for several minutes.
Remove contact lenses, ifpresentand easy to do. Continue rinsing.
If eye irritation persists : Get medical advice.
Ingestion: Obtain emergency medical attention. Do NOT induce vomiting. Rinse mouth.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use: Causes serious eye irritation.Causes skin irritation. Maycause respiratory irritation.
4.3. Indication of any immediate medical attention and specialtreatment needed
General information: Never give anything by mouth to an unconscious person
. If youfeel unwell, seekmedical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media: Foam.Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media: Do not use a heavy water stream.
Surrounding fires: Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardouscombustion products: Under fire conditions, hazardous fumes will bepresent.
5.3. Advice for fire-fighters
Protection against fire: Do not enter fire area without proper protective
equipment,including respiratoryprotection.
Special procedures: Exercise caution when fighting any chemical fire.
Avoid (reject)fire-fighting water toenter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders: Equip cleanup crew withproper protection.Ventilate area.
For non-emergency personnel: Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions: Prevent entry to sewers and public waters.
Notifyauthorities if product enterssewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods: On land, sweep or shovel into suitable containers.
Minimizegeneration of dust.Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling: Use only outdoors or in a well-ventilated area.
Wash thoroughly afterhandling.Wash thoroughly after handling.
Technical protective measures: Provide good ventilation in process area to preventformation of vapour.
Special precautions: Avoid breathing dust, fume, gas, mist, vapours, spray.
7.2. Conditions for safe storage, including any incompatibilities
Storage: Keep only in the original container in a cool, well ventilated place.
Keepcontainertightly closed.
Storage-away from: Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s): None.
8.1. Exposure controls
Personal protection: Avoid all unnecessary exposure.
• Respiratory protection: Wear approved mask.
• Hand protection: Wear protective gloves.
• Skin protection: Wear suitable protective clothing.
• Eye protection: Chemical goggles or safety glasses.
• Others: When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits: No data available.'
9.1. Information on basic physical and chemical properties
Physical state at 20 °C: Solid.
Odour threshold: No data available.
pH value: Not applicable.
Melting point [°C]: 270 °C
Decomposition point [°C]: N/A
Critical temperature [°C]: N/A
Auto-ignition temperature [°C]: N/A
Flammability (solid, gas): N/A
Flash point [°C]: N/A
Boiling point [°C]: N/A
Initial boiling point [°C]: N/A
Final boiling point [°C]: N/A
Evaporation rate: N/A
Vapour pressure [20°C]: N/A
Vapour pressure mm/Hg: N/A
Vapour density: N/A
Density [g/cm3]: N/A
Relative density, gas (air=1): N/A
Relative density, liquid (water=1): N/A
Solubility in water [% weight]: 1000 g/l @ 20°C
Solubility in water: N/A
Log Pow octanol / water at 20°C: No data available.
Solubility: N/A
Viscosity at 40°C [mm2/s]: N/A
9.2. Other information
Explosive properties: N/A
Explosion limits-upper [%]: N/A
Explosion limits-lower [%]: N/A
Oxidising properties: No data available.
10.1. Reactivity
Reactivity: Not established.
10.2. Chemical stability
Chemical stability: Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions: Not established.
10.4. Conditions to avoid
Conditions to avoid: Direct sunlight.
Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid: Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products: Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Acute toxicity
• Inhalation: Based on available data, the classification criteria are not met.
• Dermal: Based on available data, the classification criteria are not met.
• Ingestion: Based on available data, the classification criteria are not met.
Corrosion: Based on available data, the classification criteria are not met.
Irritation: Causes serious eye irritation.
Causes skin irritation.May cause respiratory irritation.
Sensitization: Based on available data, the classification criteria are not met
.Mutagenicity: Based on available data,the classification criteria are not met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Toxic for reproduction: Based on available data, the classification criteria are not met.
STOT-single exposure: Based on available data, the classification criteria are not met.
STOT-repeated exposure: Based on available data, the classification criteria are not met.
Aspiration hazard: Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information: Not established.
12.2. Persistence-degradability
Persistence-degradability: Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: Not established.
12.4. Mobility in soil
Mobility in soil: Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment: The substance does not
fulfil the criteria to beidentified as PBT substance or vPvBsubstance
according to Annex XIII of RegulationREACH.
12.6. Other adverse effects
Environmental precautions: Avoid release to the environment.
13.1. Waste treatment methods
General: Avoid release to the environment.
Dispose in a safe manner in accordance withlocal/national regulations.
14.1. Land transport (ADR-RID)
General information: Not regulated.
14.2. Sea transport (IMDG) [English only]
General information: Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information: Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for thesubstance or mixture
Safety, health and environmental: Ensure all national/local regulations are observed.
regulations/legislation specific for thesubstance or mixture
REACH Restrictions-Annex XVII: The components of this product are not subject torestrictions.
REACH Authorisation-Annex XIV: The components of this product are not subjectto authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment: It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 Further information : None. In accordance with REACH
Regulation (CE) Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[TETRA PROPYL AMMONIUM BROMIDE LR] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[TETRA PROPYL AMMONIUM BROMIDE LR] is available in small packing as well as in bulk. Buy premium quality [TETRA PROPYL AMMONIUM BROMIDE LR] and other lab chemicals from one of the most trusted brands.
