TITAN YELLOW AR
- Part number
- RXSOL-60-6605-737
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Titan yellow is a compound with formula C28H19N5Na2O6S4. It is a triazene dye used as a stain and fluorescent indicator in microscopy.
Applications
The red image shows that Titan also glows at night, which initially surprised scientists. ... This is because the two glows, one from methane (green) and carbon monoxide (red) mix together to form yellow in this multi-color composite. Titan's surface is indicated by the circle.
Dosage and directions
Titan also has a presence of organic molecules that contain carbon and hydrogen, and that often include oxygen and other elements similar to what is found in Earth's atmosphere and that are essential for life.
Characteristics and notes
Cyclopropenylidene is what's known as a cyclic or “closed-loop” molecule similar to benzene, and for the record, scientists have known benzene exists on Titan since 2003. Cyclic molecules are a vital piece of organic chemistry and might even be precursors to life.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6605-737 |
| Product Type | TITAN YELLOW GR |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation : TITAN YELLOW GR C.I.No.19540
CAS No :1829-00-1
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Not classified.
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not classified.
Health hazards : Specific Target Organ Toxicity - Single exposure - Respiratory tract
irritation - Category 3 - Warning (CLP : STOT SE 3) H335
Eye irritation - Category 2A - Warning (CLP : Eye Irrit. 2) H319
Skin irritation - Category 2 - Warning (CLP : Skin Corr. 2) H315
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Not classified.
Labelling Regulation EC 1272/2008 (CLP)
Not classified.
Signal words : Warning
Hazard statements : H319 : Causes serious eye irritation.
H315 : Causes skin irritation.
H335 : May cause respiratory irritation.
Precautionary statements
• Prevention : P280: Wear protective gloves, protective clothing, eye protection, face
protection. P271: Use only outdoors or in a well-ventilated area.
P261: Avoid breathing dust, fume, gas, mist, vapours, spray.
P264: Wash thoroughly after handling.
• Response : P302+P352: IF ON SKIN : Wash with plenty of soap and water.
P332+P313: If skin irritation occurs : Get medical advice.
P305+P351+P338: IF IN EYES : Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340: IF INHALED : Remove to fresh air and keep at rest in a position
comfortable for breathing. P363: Wash contaminated clothing before reuse.
• Storage : P403+P233: Store in well-ventilated place. Keep container tightly closed.
P405: Store locked up.
• Disposal considerations : P501: Dispose of this material and its container to hazardous
or special waste collection point, in accordance with local, regional, national and/or
international regulation.
3.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT
substance or vPvB substance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation : Assure fresh air breathing. Allow the victim to rest. Remove to fresh air and
keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor if
you feel unwell.
Skin contact : Remove affected clothing and wash all exposed skin area with mild soap
and water, followed by warm water rinse. Wash contaminated clothing before reuse.
Wash with plenty of soap and water. If skin irritation occurs : Specific treatment (see on
this label). Get medical advice.
Eye contact : Rinse immediately with plenty of water. Obtain medical attention if pain,
blinking or redness persist. If eye irritation persists : Get medical advice. Remove contact
lenses, if present and easy to do. Continue rinsing. Rinse cautiously with water for
several minutes.
Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Causes serious eye irritation.
Causes skin irritation. May cause respiratory irritation.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be
present.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject)
fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : On land, sweep or shovel into suitable containers. Minimize
generation of dust. Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling : Use only outdoors or in a well-ventilated area. Wash thoroughly after
handling. Wash thoroughly after handling.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour.
Special precautions : Avoid breathing dust, fume, gas, mist, vapours, spray.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep
container tightly closed.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Skin protection : Wear suitable protective clothing.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Colour : Yellowish brown powder
Odour : Odorless
Odour threshold : No data available.
pH value : Not applicable.
Melting point [°C] : > 300 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : N/A
Flammability (solid, gas) : N/A
Flash point [°C] : N/A
Boiling point [°C] : N/A
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : N/A
Vapour density : N/A
Density [g/cm3] : N/A
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : 29 g/l at 20 °C
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : 5.1 at 10 g/l at 20
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Based on available data, the classification criteria are not met.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Based on available data, the classification criteria are not met.
Irritation : Causes serious eye irritation.
Causes skin irritation. May cause respiratory irritation.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not
met.
Aspiration hazard : Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.
13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
14.1. Land transport (ADR-RID)
General information : Not regulated.
14.2. Sea transport (IMDG) [English only]
General information : Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information : Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
TITAN YELLOW AR manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
TITAN YELLOW AR is available in small packing as well as in bulk. Buy premium quality TITAN YELLOW AR and other lab chemicals from one of the most trusted brands.
