Tankleen Heavy Duty RXSOL
- Part number
- RXSOL-20-2029-210
- Category
- Tank Cleaner
- Brand
- RXSOL
Overview
RXSOL Solvent-based tank cleaners is highly effective to remove tough residues. Concentrated effective cleaner for contaminated FUEL OIL, cargo tanks. It's high emulsification formula easily react with residue / sludge deposits .RXSOL-20-2029-210 is used as a tank cleaner or for general degreasing, cleaning and gas freeing for double bottom tanks, wing tanks, tank lines, fuel oil tanks, etc.
Technical specifications
|||
| In g/cm3 at 15°C | 99 |
|---|---|
| (PMCC)°C | Above |
| When mixed with water, a clear emulsion is formed. | |
| Flash Point | > None |
Applications
- High solvency action for heavy hydrocarbon residues
- Effective on sludge, wax, and asphaltic deposits
- Works efficiently in both hot and cold cleaning
- Non-corrosive and safe on tank materials
Tank Lining – Stainless / Zinc / Epoxy / Phenolic.
Using-Procedure
| Spraying | This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives. As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2029-020 Plus should be sprayed over all surfaces which are safely reacheable. |
| Portable machines | – After 45 minutes the butterworth machines should be operated for 3 x 20 minutes drops using warm 60o C, then the machines brought back to the top and a full hot wash 80 – 85 o C should be carried out for at least 6 hours. |
| Fixed machines | – Wash ambient for 45 minutes followed by warm water for one cycle before increasing to hot (80oC) for 4 hours. |
| Injection | – This can be carried out by injecting RXSOL-20-2029-020 Plus into the butterworth system after the heater. A normal amount to use would be 100 – 150 liters during the initial washing cycle. Water temperature should be 60o C during the injection period then brought up to 80 – 85 o C for the full washing period. |
| Re-circulation |
– Possibly the best result are achieved by re-circulating a solution of RXSOL-20-2029-020 Plus after the initial rough washing of the tank. A sufficient amount of fresh water to maintain good suction should be heated to 60 o C and approximately 420 liters of RXSOL-20-2029-020 Plus (2 drums) added for each 500 liters of fresh water. The temperature of the mixture can be increased depending upon the melting point if the product being cleaned. The solution should be circulated for at least 4 hours and the butterworth machines operated at maximum pressure in all areas of the tank throughout this process. If a number of tanks are to be circulated, then a substantial quantity of solution can be made so that transfers can be made without delay and any small amounts lost will not affect the operation. Normally following transfer to another tank, 100 liters RXSOL-20-2029-020 Plus is added for each 5000 liters of solution. This is called “spiking”. |
Dosage and directions
For tank cleaning 0.05% to 0.5% , Non corrosive . It may safely be applied on all metal surfaces.
Tank Cleaner and Degreaser Quickly removes oil, grease, gimres, adhesive and dyes. Best results also achieved forcleaning of oil side of fuel and lube oil heat exchangers. Used as a tank cleaner or for general degreasing , cleaning and gas freeing for double bottom tanks, wing tanks, tank lines, fuel oil tanks, etc .
RXSOL-20-2029-210 is highly concentrated organic / inorganic emulsifier with powerful penetrating agents, corrosion inhibitors and surfactants.
Characteristics and notes
Tank Cleaner HD is powerful Solvent based Emulsifier, Effectively CLEANS oily greasy mud, Effectively works on Black Oil, Furnace Carbon deposited mess. RXSOL TANK CLEANER HD is blended with new generation penetrating solvent and Emulsifier to make cleaning easy and fast.
**Used as a multi-purpose degreaser in extremely hard cleaning conditions**
Characteristics
It is cost effective, easy to apply and use.
• High emulsification on mineral oils and petroleum based chemicals.
• Safe to use on most metal surfaces, painted surfaces and tank coatings.
• Cleans oil coolers, fuel oil pre heaters and lube oil heat exchangers.
• Removes general oil contamination from machinery and engine room.
• Economical cost effective .
**For detailed information on safety & health, Please refer to Material Safety Data Sheet & /or Product Label**
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-20-2029-210 |
| Product Type | TANKleen Heavy Duty RXSOL |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Haldia, Fujairah, Muscat
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| 0Email | mail@rxmarine.com |
Chemical characterization
Description:Mixture contains: Emulsifiable liquid of Aliphatic & Aromatic fuel ( 20 to 30% ) Along with Butoxyethanol , Emulsifying agents as surfactants, FattyAcid derivative ( biodegradable substance 85 to 90%) and Ethoxylate . And with harmless addition.
N Dangerous for Enviroment Environmental Hazards None Human Health Hazards Moderates , may cause lung damage if swallowed
NOTE: Person-related safety precautions required.
( Take affected persons out of Danger area and instruct to lie down )
|
After inhalation |
On Inhalation move to fresh air / Arificial respiration . Get medical attention in case of symptoms |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating, Protective clothing require |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing |
( On persistent symptoms Harmful, if ingested,Do not induce Vomiting. Get medical attention. |
|
Extinguishing Media |
Cool endangered container with water |
|
A. Suitable |
Foam,dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable |
|
Direct water jet on larger fire |
Masked with Air Respirator Protection of fire Fighter |
NOTE :Absorb with liquid-binding material (sand,diatomite,acid binders,universal binders,sawdust ,oil adsorbent).
|
Care for environmental protection |
Prevent material from reaching sewage system, holes and cellars. Dilute with much water. |
|
PROCEDURE for cleaning/collecting |
Remove RXSOL TC 2001 with absorbent materials or mechanically .And dispose accordance with section , Then flush with water and ventilate well. |
Ensure adequate ventilation
|
Handling |
Eyewash facilities require at workplace |
|
Storage |
General Storage , container should be tightly. Protect from direct sunlight and heat flames. |
|
Methods of cleaning |
Flush Spill Area with Water |
NOTE Keep Container Tightly Closed
ENVIROMENTAL PRECAUTION
Readily Bio-Degradable , missible with water ,low toxicity , No environmental problem on correctly usage.
PERSONAL PROTECTION
|
Respiratory System Protection |
Breathing equipment Not required |
|
Eye Protection |
wear eye protection (on possibility of contact) |
NOTE : -
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. Keep away from foodstuffs, beverages and food
|
Protection of hand |
Protective gloves , wash hand after touch. |
|
Eye protection |
Tightly sealed safety glasses |
PRODUCT PROPERTIES
|
Appearance |
Clear liquid / Low viscous |
|
|
Odor |
Characteristic / Odorless |
|
|
Density |
In g/cm3 at 15°C: 0.99 NOTE : SHELF LIFE 5 YEARS |
|
|
Boling Point |
MATERIALS BOILS AT 160°C |
|
|
Flash Point |
None |
|
|
Flammability |
Not self Igniting |
|
|
Explosive |
Not Explosive |
|
|
Solubility in Water |
100% soluble fully miscible EFFICIENCY |
|
|
Compatibility |
A .SEA WATER 70% |
|
|
Metal |
No known effect |
|
|
pH |
6 +0.5 |
|
|
PACKAGING |
Order No. |
Size (in litres) |
|
Condition to Avoid |
Heat, Flame & Other Sources of Ignition |
|
Materials to Avoid |
Do not subject to Reducing /Oxidizing Agents. |
|
Hazardous Decomposition Products |
Do not occur |
NOTE : No decomposition if used according to specifications.
|
Skin Irritation |
irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
(All above information as per data available with us)
|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable , Readily biodegradable |
Water hazard class 2 (self-assessment): hazardous for water.) Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil.
This material must be disposed with local national regulations. Product Recommendation ( Recommended cleaning agent :water ) Must be not dispose of together with household garbas. Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations. Can be reused or recycled after cleaning .
LAND TRANSPORT 9, Miscellionus Dangrous, substance and article
• Marine pollutant:
• Hazard designation of product: Xi Irritant.
• Irritating to eyes and skin.
• Safety phrases Keep out reach of children If swallowed, seek medical attention immediately
Harmful if swallowed In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention. Do not Breathe After contact with skin, wash immediately with plenty
of water and soap and rinse thoroughly. Risk of serious damage to eyes
• National regulations
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.Department issuing data specification sheet Environment protection department.
NOTE : NO ENVIRONMENTAL PROBLEMS ARE EXPECTED IF THE PRODUCT IS HANDLED CORRECTLY.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Tank Cleaner Heavy Dutry Solvent Emulsifier based product and specified marine chemical tank cleaner category msnufscturer and supplier in Ruwi Ghala Barka Muscat Sohar Oman, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, UAE Gulf, Fujairah Tank Terminal, Gulf, Mumbai, JNPT, Masjid Bunder Yellowgate Mumbai, Gandhidham Kandla Mundra, Jamnagar, Hazira, Haldia Buz Buz Kolkata Paradip, Visakhapatnam, Gangavaram, Ennore Chennia, Kakinada, Nairobi Kenya Sudan Yemen
