Teflon Finish Advanced Protector

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Component                                                                                          CAS-No.           Concentration
Water                                                                                                  7732-18-5              76 - 92 %
2-Methylpentane-2,4-diol                                                                  107-41-5                 3 - 7 %
Partially Fluorinated Condensation Polymer                                                                   1 - 5 %
Acrylic Copolymer                                                                                                              3 - 7 %
Partially Fluorinated Amphiphilic Condensation Polymer                                             1 - 5 %

Emergency Overview
The hazards of this product are associated mainly with its processing. Inhalation of decomposition products in
high concentration may cause shortness of breath (lung oedema). Inhalation of aerosol or fine spray mist may
cause serious respiratory problems.
Potential Health Effects
Skin : May cause skin irritation. May cause:, Discomfort, itching, redness, or
swelling..
Eyes : May cause eye irritation. May cause:, tearing, Redness, Discomfort.
Inhalation : Inhalation of decomposition products in high concentration may cause
shortness of breath (lung oedema). Inhalation of aerosol or fine spray mist
may cause serious respiratory problems.
Carcinogenicity
None of the components present in this material at concentrations equal to or greater than 0.1% are listed by
IARC, NTP, or OSHA, as a carcinogen.

Skin contact : Wash off immediately with soap and plenty of water. Wash contaminated
clothing before re-use.
Eye contact : Rinse immediately with plenty of water for at least 15 minutes. Seek medical
advice.
Inhalation : Move to fresh air. Oxygen or artificial respiration if needed. Symptoms may be
delayed. Call a physician immediately.
Ingestion : Call a physician or poison control centre immediately. If swallowed, DO NOT
induce vomiting unless directed to do so by medical personnel. Never give
anything by mouth to an unconscious person.

Flammable Properties
Flash point : > 93 °C (> 199 °F)
Thermal decomposition : > 200 °C (> 392 °F)
To avoid thermal decomposition, do not overheat.
Thermal decomposition can lead to release of irritating gases and vapours.
Fire and Explosion Hazard : The product itself does not burn. Hazardous decomposition products formed
under fire conditions. Hazardous combustion products: Hydrogen fluoride
Carbon dioxide (CO2) Carbon monoxide Other hazardous decomposition
products may be formed.
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and
the surrounding environment.
Firefighting Instructions : Wear self contained breathing apparatus for fire fighting if necessary.
Evacuate personnel to safe areas. Do not allow run-off from fire fighting to
enter drains or water courses.

NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with cleanup.
Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up.
Safeguards (Personnel) : Evacuate personnel to safe areas. Use personal protective equipment.
Ventilate the area.
Spill Cleanup : Dam up. Soak up with inert absorbent material (e.g. sand, silica gel, acid
binder, universal binder, sawdust). Pick up and transfer to properly labelled
containers.
Accidental Release Measures : Do not discharge to streams, ponds, lakes or sewers. Avoid subsoil
penetration.

Handling (Personnel) : Avoid formation of respirable particles. Do not breathe vapor or mist. Avoid
contact with skin, eyes and clothing.
Wash hands before breaks and immediately after handling the product. Wash
contaminated clothing before re-use.
Handling (Physical Aspects) : To avoid thermal decomposition, do not overheat. Thermal decomposition
can lead to release of irritating gases and vapours.
Do not spray near open flame or heated surface.
Storage : Keep tightly closed in a dry, cool and well-ventilated place.
 

 Engineering controls : Use only in area provided with appropriate exhaust ventilation. Use an airless
flow type of spray applicator. Keep spraying pressure below 60 psi.
Personal protective equipment
Respiratory protection : In case of mist or aerosol exposure wear suitable personal respiratory
protection.
Hand protection : Additional protection: Impervious gloves
Eye protection : Wear safety glasses or coverall chemical splash goggles.
Skin and body protection : Lightweight protective clothing
Exposure Guidelines
Exposure Limit Values
2-Methylpentane-2,4-diol
TLV (ACGIH) 25 ppm TLV-C*

 Conditions to avoid : To avoid thermal decomposition, do not overheat.
Hazardous decomposition
products : Carbon dioxide , Carbon monoxide, Hydrogen fluoride
Incompletely burned carbon products
Other hazardous decomposition products may be formed.

Further information : No data is available on the product itself.
2-Methylpentane-2,4-diol
Dermal LD50 : > 2,000 mg/kg , rat
Oral LD50 : > 2,000 mg/kg , rat
Inhalation : An LC50/inhalation/4h/rat could not be determined because no
mortality of rats was observed at the maximum achievable
concentration.
Skin irritation : slight irritation, rabbit Eye irritation : slight irritation, rabbit
Skin sensitization : Animal test did not cause sensitization by skin contact., guinea pig
Repeated dose toxicity : Oral
rat
No adverse effect has been observed in chronic toxicity tests.
Mutagenicity : Evidence suggests this substance does not cause genetic damage in
animals.
Tests on bacterial or mammalian cell cultures did not show mutagenic
effects.
Reproductive toxicity : Animal testing showed no reproductive toxicity.
Teratogenicity : Evidence suggests the substance is not a developmental toxin in
animals.
Partially Fluorinated Condensation Polymer
Oral ALD : > 11,000 mg/kg , rat
Skin irritation : slight irritation, rabbit
Eye irritation : slight irritation, rabbit
Skin sensitization : Did not cause sensitization on laboratory animals., mouse
Mutagenicity : Tests on bacterial or mammalian cell cultures did not show mutagenic
effects.
Reproductive toxicity : Animal testing showed no reproductive toxicity.
Teratogenicity : Animal testing showed no developmental toxicity.
Partially Fluorinated Amphiphilic Condensation Polymer
Dermal LD50 : > 5,000 mg/kg , rat
Oral LD50 : > 5,000 mg/kg , rat
Inhalation 4 h ALC -
Approximate Lethal : > 1.363 mg/l , rat Concentration
Skin irritation : No skin irritation, rabbit
Eye irritation : slight irritation, rabbit
Skin sensitization : Did not cause sensitization on laboratory animals., mouse
Mutagenicity : Did not cause genetic damage in cultured bacterial cells.

 Aquatic Toxicity
2-Methylpentane-2,4-diol
96 h LC50 : Pimephales promelas (fathead minnow) 8,690 mg/l
96 h LC50 : Oncorhynchus mykiss (rainbow trout) 9,450 mg/l
96 h LC50 : Lepomis macrochirus (Bluegill sunfish) 12,800 mg/l
96 h LC50 : Gambusia affinis (Mosquito fish) 8,510 mg/l
96 h LC50 : Carassius auratus (goldfish) 12,000 mg/l
72 h EC50 : Selenastrum capricornutum (green algae) > 429 mg/l
48 h EC50 : Daphnia magna (Water flea) 5,410 mg/l
Partially Fluorinated Condensation Polymer
96 h LC50 : Oncorhynchus mykiss (rainbow trout) > 100 mg/l
Information given is based on data obtained from similar product.
72 h NOEC : Algae > 100 mg/l
Information given is based on data obtained from similar product.
72 h LC50 : Algae > 100 mg/l
Information given is based on data obtained from similar product.
48 h EC50 : Daphnia magna (Water flea) 4.3 mg/l
Information given is based on data obtained from similar product.Partially Fluorinated Amphiphilic Condensation Polymer
48 h EC50 : Daphnia magna (Water flea) > 120 mg/l
Information given is based on data obtained from similar product.
Environmental Fate
2-Methylpentane-2,4-diol
Biodegradability : Readily biodegradable.
Bioaccumulation : Bioconcentration factor (BCF) : 3.16
Bioaccumulation is unlikely.

 Waste Disposal : In accordance with local and national regulations.

 Not classified as dangerous in the meaning of transport regulations.

 TSCA : Listed
This material contains one or more substances which are subject to a TSCA
Section 5 Consent Order or Significant New Use Rule (SNUR).
See 40 CFR 721.10146 for SNUR requirements.
This material contains one or more substances which requires export
notification under TSCA Section 12(b) and 40 CFR Part 707 Subpart D:: Partially Fluorinated Amphiphilic Condensation Polymer
PMN Number: P-08-0200
Partially Fluorinated Condensation Polymer
PMN Number: P-07-0087
This material shall not be distributed to consumers for use in spray
applications.
Contact your local DuPont sales or technical representative for more
information.
SARA 313 Regulated
Chemical(s)
: SARA 313: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis) reporting levels
established by SARA Title III, Section 313.
California Prop. 65 : Chemicals known to the State of California to cause cancer, birth defects or
any other harm: none known
PA Right to Know
Regulated Chemical(s)
: Substances on the Pennsylvania Hazardous Substances List present at
a concentration of 1% or more (0.01% for Special Hazardous
Substances): 2-Methylpentane-2,4-diol
NJ Right to Know
Regulated Chemical(s) : Substances on the New Jersey Workplace Hazardous Substance List
present at a concentration of 1% or more (0.1% for substances
identified as carcinogens, mutagens or teratogens): 2-Methylpentane-
2,4-diol

HMIS
Health : 1
Flammability : 0
Reactivity/Physical hazard : 0
The
information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process, unless specified in the text.
Significant change from previous version is denoted with a double bar.