RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

Triethanolamine 10% Solution

Lab Reagent
Part number
RXSOL-60-6211-500
Category
Lab Chemical
Brand
RXSOL
Triethanolamine 10% Solution

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name Triethanolamine 10% Solution
Product Type RXSOL-60-6211-500

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA 

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
SARA 313 Component  CAS Number Percent Comp. Dimension
 
Exposure
 Limits
 
Triethanolamine 99%

CAS# 102-71-6

 10%

V/V OSHA TWA
50 ppm (270
mg/mƒ)
Water, Deionized ASTM Type II CAS# 7732-18-5 90% V/V None Established

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

Emergency Overview:Warning! Harmful If Swallowed. Causes Skin Irritation And Severe Eye Irritation.

Inhalation:No Adverse Effects Expected Since Triethanolamine has a Low Vapor Pressure.

Ingestion:May Cause Burns in the Mouth, Pharnyx, and Esophagus, Abdominal Pain, Nausea, Vomiting
and Diarrhea.

Skin:May Cause Irritation, Redness, and Pain, Especially on Prolonged or Repeated Contact.

Eye Contact:Corrosive! Contact Causes Severe Irritation, Burns, Redness, and Pain. May Cause Irritation,
Redness, Pain, and Corneal Damage.

Chronic Exposure:Repeated Ingestion has Caused Kidney and Liver Damage to Animals.

Aggravated by Exposure:No Information Found.

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts.Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

SKIN:

Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.Seek Medical Aid.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.

Fire Extinguisher Type:

Carbon Dioxide, dry chemical powder or appropriate foam
Fire / Explosion Hazards: Thermal decomposition produces highly toxic fumes. Do not direct water stream at
burning pools.
Fire Fighting Procedure: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. Dike and collect water used to fight fire.

Wear Protective equipment. Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.

Ventilate Area of Leak or Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Contain and Recover Liquid when Possible. Collect Liquid in an Appropriate Container or Absorb with an Inert Material (e.g., Vermiculite, Dry Sand, Earth), and Place in a Chemical Waster Container. Do Not Use Combustible Materials, such as Saw Dust. Do Not Flush To Sewer!

Wash thoroughly after handling. Remove contaminated clothes and wash before reuse. Use with adequate ventilation. Store in a cool dry well ventilated area. Keep out of direct sunlight and away from heat, water and incompativle materials.

Respiratory Protection

None required
Ventilation
 
 Local
 
OTHER Mechanical
 
Protective Gloves PVC coated, Butyl, or other suitable gloves.
EYE PROTECTION Goggles and Face Shield
Other Protective Equipment Wear appropriate clothing to prevent skin exposure
BOILING POINT 635° F (335°C)
VAPOR PRESSURE  5.1
MELTING POINT information not available
VAPOR DENSITY  <0.01 @68° F
EVAPORATION RATE information not available
Appearance /Odors Clear to pale  yellow liquid with ammonia
Flash Point 354° F (179°C)
Specific Gravity 1.13 @20° C
Percent Volatile by ~80%
Evaporation Standard   information not available
Auto Ignition Temp 599° F (315° C)
Lower Flamm. Limit in Air 1.3%
Upper Flamm. Limit in Air 8.5%
Solubility in Water Soluble

STABILITY

Stable

CONDITIONS TO AVOID

Sensitive to light and air

MATERIALS TO AVOID

Oxidizing agents, acids. Copper, copper alloys, galvanized iron, acids, oxidizers

HAZARDOUS DECOMPOSITION PRODUCTS

Carbon Monoxide, Carbon Dioxide,Nitrogen Oxides

HAZARDOUS POLYMERIZATION

will not occur
 
Conditions to Avoid  None known

Carcinogenic References: IARC Category- None, NTP Carcinogen - Known: No

When Released into the Soil, this Material is Expected to Biodegrade. When Released into the Soil, this Material may Leach into Groundwater. When Released into the Soil, this Material is Expected to have a Half-Life of 1 and 10 Days. When Released into the Water, this Material is Expected to Readily Biodegrade.

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

DOT Classification: Not Regulated

DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.

All components listed on TSCA Inventory.

Conditions aggravated: Persons with preexisting skin, eye or respiratory conditions may be more susceptible. Acute: Irritation or burns to skin, eyes, mouth, respiratory and digestive systems. Chronic: Dermatitis, conjunctivitis, kidney and liver damage.                                                      

                                                Flammability
 

Health                                                                                                     Reactivity

Revisions

  NFPA
7/30/2010 0.1 updated msds to 16 section from 10 section msds. STN
   0

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Triethanolamine 10% Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Triethanolamine 10% Solution at a competitive price from us. We have ready stock of Triethanolamine 10% Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches