VAN GIESON II SOLUTION FOR MICROSCOPY
- Part number
- RXSOL-60-6605-811
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
VAN GIESON II SOLUTION FOR MICROSCOPY ready-to-use Picrofuchsin solution acc. to van Gieson is used for staining collagenous connective tissue, muscle tissue, and cornified epithelium in human sample material. It can also be used to stain glia fibrils and cytoplasm.
Applications
Van Gieson Stain is used to differentiate between collagen and smooth muscle in tumors and to demonstrate the increase of collagen in diseases. This method combines two or more anionic dyes and rely on differential binding by tissue components.
Dosage and directions
Van Gieson's trichrome is used for the differentiation between collagen and smooth muscle in tumors and to demonstrate the increase in the amount of collagen in these pathologies.
Characteristics and notes
Use 4 ml of distilled water to dissolve potassium iodide. And then add iodine. Once iodine is dissolved, dilute this solution by adding 96 ml of distilled water. This solution may be prepared fresh as needed or made in larger quantities and stored in brown bottle in the dark at room temperature.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6605-811 |
| Product Type | VAN GIESON II SOLUTION FORMICROSCOPY |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation: Preparation.
Hazardous component(s): This product is not
hazardous but contains hazardouscomponents.
3.1. Classification of the substance or mixture
Classification EC 67/548 orEC 1999/45
Not classified.
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not classified.
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Not classified.
Symbol(s): None.
R Phrase(s): None.
S Phrase(s): None.
Contains: Water-2,4,6-trinitrophenol; picric acid-Hydrochloric acid-FUCHSINACID
forMicroscopyLabelling Regulation EC 1272/2008 (CLP)
Not classified.
Contains: Water-2,4,6-trinitrophenol; picric acid-Hydrochloric acid-FUCHSINACID forMicroscopy
3.3. Other hazards
Other hazards: The substance does not fulfil the criteria to be identified as PBT
substance or vPvBsubstance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation: Assure fresh air breathing.
Allow the victim to rest.Skin contact: Remove affected clothing and wash all exposed
skin area with mild soapandwater, followed by warm water rinse.
Eye contact: Rinse immediately with plenty of water.
Obtain medical attention if pain,blinking orredness persist.
Ingestion: Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
Call aPOISON CENTER or doctor if you feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use: Swallowing a small quantity of this material will result inserious health hazard.
4.3. Indication of any immediate medical attention and special treatment needed
General information: Never give anything by mouth to an unconscious person.
If youfeel unwell, seekmedical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media: Foam. Dry powder. Carbon dioxide.Water spray. Sand.
Unsuitable extinguishing media: Do not use a heavy water stream.
Surrounding fires: Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products: Under fire conditions, hazardous fumes will bepresent.
5.3. Advice for fire-fighters
Protection against fire: Do not enter fire area without proper protective
equipment,including respiratoryprotection.
Special procedures: Exercise caution when fighting any chemical fire.
Avoid (reject)fire-fighting water toenter environment.
6.1. Personal precautions, protective equipment and emergencyprocedures
For emergency responders: Equip cleanup crew with proper protection.Ventilate area.
For non-emergency personnel: Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions: Prevent entry to sewers and public waters.
Notifyauthorities if product enterssewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods: Soak up spills with inert solids, such as clay or diatomaceous
earthas soon aspossible. Store away from othermaterials. Collect spillage.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling: Do not eat, drink or smoke when using this product.
Wash thoroughly afterhandling.
Technical protective measures: Provide good
ventilation in process area to preventformation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage: Keep only in the original container in a cool, well ventilated place.
Keepcontainerclosed when not in use.
Storage-away from: Strong bases.
Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s): None.
8.1. Exposure controls
Personal protection: Avoid all unnecessary exposure.
• Respiratory protection: Wear approved mask.
• Hand protection: Wear protective gloves.
• Eye protection: Chemical goggles or safety glasses.
• Others: When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits: No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C: Liquid.
Odour threshold: No data available.
pH value: No data available.
Melting point [°C]: No data available.
Decomposition point [°C]: N/A
Critical temperature [°C]: No data available.
Auto-ignition temperature [°C]: No data available.
Flammability (solid, gas): N/A
Flash point [°C]: No data available.
Boilingpoint [°C]: N/A
Initial boiling point [°C]: No data available.
Final boiling point [°C]: No data available.
Evaporation rate: N/A
Vapour pressure [20°C]: No data available.
Vapour pressure mm/Hg: N/A
Vapour density: N/A
Density [g/cm3]: N/A
Relative density, gas (air=1): N/A
Relative density, liquid (water=1): N/A
Solubility in water [% weight]: N/A
Solubility in water: No data available.
Log Pow octanol / water at 20°C: No data available.
Solubility: N/A
Viscosity at 40°C [mm2/s]: No data available.
9.2. Other information
Explosive properties: N/A
Explosion limits-upper [%]: No data available.
Explosion limits-lower [%]: No data available.
Oxidising properties: No data available.
10.1. Reactivity
Reactivity: Not established.
10.2. Chemical stability
Chemical stability: Stable under recommended storage conditions.
10.3. Possibility of hazardous
reactionsHazardous reactions: Not established.
10.4. Conditions to avoid
Conditions to avoid: Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid: Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products: Fumes.
Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Toxicity information: The product has been not fully tested.
The calculated risk hasbeen done under therequirements of the EU regulations.
Acute toxicity
• Inhalation: Based on available data, the classification criteria are not met.
• Dermal: Based on available data, the classification criteria are not met.
• Ingestion: Harmful if swallowed.Corrosion: Based on available data, the classification criteria are not met.
Irritation: Based on available data, the classification criteria are not met.
Sensitization: Based on available data, the classification criteria are not met.
Mutagenicity: Based on available data, the classification criteria are not met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Toxic for reproduction: Based on available data, the classification criteria are not met.
STOT-single exposure: Based on available data, the classification criteria are not met.
STOT-repeated exposure: Based on available data, the classification criteria are not met.
Aspiration hazard: Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information: The product has been not fully tested.
The calculatedrisk hasbeen done under therequirements of the EU regulations.
12.2. Persistence-degradability
Persistence-degradability: Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: Not established.
12.4. Mobility in soil
Mobility insoil: Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment: The substance does
not fulfil the criteria to beidentified as PBT substance or vPvBsubstance
according to Annex XIII of RegulationREACH.
12.6. Other adverse effects
Environmental precautions: Avoid release to the environment.
13.1. Waste treatment methods
General: Avoid release to the environment.
Dispose in a safe manner in accordance withlocal/national regulations.
Dispose of this material and its container to hazardous orspecial waste
collectionpoint, in accordance with local, regional, national and/orinternational regulation.
14.1. Land transport (ADR-RID)
General information: Not regulated.
14.2. Sea transport (IMDG) [English only]
General information: Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information: Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for thesubstance or mixture
Safety, health and environmental: Ensure all national/local regulations are observed.
regulations/legislation specific for thesubstance or mixture
REACH Restrictions-Annex XVII: The components of this product are not subject torestrictions.
REACH Authorisation-Annex XIV: The components of this product are not subjectto authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment: It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 Further information : None. In accordance with REACH
Regulation (CE) Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[VAN GIESON II SOLUTION FOR MICROSCOPY] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[VAN GIESON II SOLUTION FOR MICROSCOPY] is available in small packing as well as in bulk. Buy premium quality [VAN GIESON II SOLUTION FOR MICROSCOPY] and other lab chemicals from one of the most trusted brands.
