VANILLIN AR
- Part number
- RXSOL-60-6605-815
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Vanillin is an organic compound with the molecular formula C8H8O3. It is a phenolic aldehyde. Artificial vanilla flavoring is often a solution of pure vanillin, usually of synthetic origin.
Applications
The largest use of vanillin is as a flavoring, usually in sweet foods. The ice cream and chocolate industries together comprise 75% of the market for vanillin as a flavoring, with smaller amounts being used in confections and baked goods.
Dosage and directions
Vanillin is known to release several substances when burnt. These include polycyclic aromatic hydrocarbons, which have been classed as human cancer causing agents by the International Agency for Research on Cancer (a leading expert cancer organisation).
Characteristics and notes
It is a fragrance used in a variety of products such as personal care products, flavorings, and essential oils in perfumes. How can I avoid it? Skin contact with Vanillin is required for it to cause a rash.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6605-815 |
| Product Type | VANILLIN AR |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation: Vanillin
CAS No :121-33-5
Substance.
Contains no other components or impurities which will influence the classification of theproduct.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : Xn; R22 Xi; R36 R43
ure Hazard Class and Category Code(s),
Regulation (EC) No 1272/2008
(CLP) Health hazards : Specific Target
Organ Toxicity Warning (CLP : STOT SE 2) H371
Single exposure Acute toxicity, Oral-- Category 4
Category 2-- Warning (CLP : Acute Tox. 4) H302
Skin sensitisationEye irritation Category 1-- Category
2AWarning (CLP : Eye Irrit. 2) H319
Warning (CLP : Skin Sens. 1) H317
3.2. Label elements
Labelling EC 67/548 or EC 1
Symbol(s) : Xn : Harmful
R Phrase(s) 999/45 : R22 : Harmful if swallowed.
R36 : Irritating to eyes.
R43 : May cause sensitization by skin contact.
R62 : Possible risk of impaired fertility.
R68 : Possible risks of irreversible effects.
S Phrase(s) and seek : S2 6 : In case of contact with eyes, rinse
immediately with plenty of water medical advice.
S36/37 : Wear suitable protective clothing and gloves.
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms
Signal words: Warning
Hazard statements: H302 : Harmful if swallowed.
H319 : Causes serious eye irritation.
H317 : May cause an allergic skin reaction.
H371 : May cause damage to organs.Precautionary statements
• Prevention: P280: Wear protective gloves, protective clothing, eye protection, faceprotection.
P260: Do not breathe dust, fume, gas, mist, vapours, spray.
P264: Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product
P272: Contaminated work clothing should not be allowed out of the workplace.
• Response: P302+P352: IF ON SKIN : Wash with plenty of soap and water.
P301+P312: IF SWALLOWED : Call a POISON CENTER or doctor if you feelunwell.
P309+P311: IF exposed or if you feel unwell : Call a POISON CENTER or doctor.
P305+P351+P338: IF IN EYES : Rinsecautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P333+P313: If skin irritation or rash occurs : Get medical advice.
P363: Wash contaminated clothing before reuse.
• Storage: P405: Store lockedup.
• Disposal considerations: P501: Dispose of this material and its container to hazardousor
special wastecollection point, in accordance with local, regional, national and/orinternationalregulation.
3.3. Other hazards
Other hazards: The substancedoes not fulfil the criteria to be identified as
PBTsubstance or vPvBsubstance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation: Assure fresh air breathing. Allow the victim to rest.
Skin contact: Wash contaminated clothing before reuse.
Wash with plenty of soap andwater.
Ifskin irritation occurs : Get medical advice. Specific treatment (see on this label).
Eye contact: Get medical advice.
If eye irritation persists : Remove contact lenses, ifpresent andeasy to do.
Continue rinsing. Rinse cautiously with water for several minutes.
Ingestion: Obtain emergency medical attention. Call a POISON CENTER or
doctor ifyou feelunwell. Do NOT induce vomiting. Rinse mouth.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use: Swallowing a small quantity of this material will result inserious
health hazard.Causes serious eye irritation.Causes skin irritation.
4.3. Indication of any immediate medical attention and special treatment needed
General information: Never give anything by mouth to an unconscious person.
If youfeel unwell, seekmedical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media: Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media: Do not use a heavy water stream.
Surrounding fires:Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products: Under fire conditions, hazardous fumes will bepresent.
5.3. Advice for fire-fighters
Protection against fire: Do not enter fire area without proper protective equipment,
including respiratoryprotection.Special procedures: Exercise caution when fighting
any chemical fire. Avoid (reject)fire-fighting water toenter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders: Equip cleanup crew with proper protection.Ventilate area.
For non-emergency personnel: Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions: Prevent entry to sewers and public waters.
Notifyauthorities if product enterssewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods: On land, sweep or shovel into suitable containers
. Minimizegeneration of dust.Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Personal protection: Do not eat, drink or smoke when using this product.
Washthoroughly afterhandling. Do not breathe dust, fume, gas, mist, vapours, spray.
Handling: Contaminated work clothing should not be allowed out of the workplace.
Washcontaminated clothing before reuse. Avoid breathing dust, fume, gas, mist,vapours, spray
.Wash thoroughly after handling. Do not eat, drink or smoke whenusingthis product.
Technical protective measures: Provide good ventilation in process area to preventformation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage: Keep only in the original container in a cool, well ventilated place.
Keepcontainerclosed when not in use.
Storage-away from: Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s): None.
8.1. Exposure controls
Personal protection: Avoid all unnecessary exposure
.• Respiratory protection: Where exposure through inhalation
may occur from use,respiratory protectionequipment is recommended.
• Hand protection: Wear protective gloves.
• Eye protection: Chemical goggles or safety glasses.
• Others: When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits: No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C: Solid.
Odour threshold: No data available
.pH value: No data available
.Melting point [°C]: 81-83 °C
Decomposition point [°C]: N/A
Critical temperature [°C]: N/A
Auto-ignition temperature [°C]: 400 °C
Flammability (solid, gas): N/A
Flash point [°C]: 147°C
Boiling point [°C]: 170 °C
Initial boiling point [°C]: N/A
Final boiling point [°C]: N/A
Evaporation rate: N/A
Vapour pressure [20°C]: N/A
Vapour pressuremm/Hg: 1 mm Hg at 107 °C
Vapour density: 5,2
Density [g/cm3]: 1,056
Relative density, gas (air=1): N/A
Relative density, liquid (water=1): N/A
Solubility in water [% weight]: 11 g/l @ 25°C
Solubility in water: N/A
Log Pow octanol / water at 20°C:No data available.
Solubility: 4.3 (10 g/l)
Viscosity at 40°C [mm2/s]: N/A
9.2. Other information
Explosive properties: N/A
Explosion limits-upper [%]: N/A
Explosion limits-lower [%]: N/A
Oxidising properties: No data available.
10.1. Reactivity
Reactivity: Not established.
10.2. Chemical stability
Chemical stability: Stable under recommended storage conditions.
10.3. Possibility of hazardous
reactionsHazardous reactions: Not established.
10.4. Conditions to avoid
Conditions to avoid: Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid: Strong acids. Strong bases.
10.6. Hazardous decomposition
productsHazardous decomposition products: Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effectsAcute toxicity
• Inhalation: Based on available data, the classification criteria are not met.
• Dermal: Based on available data, the classification criteria are not met.
• Ingestion: Harmful if swallowed.
Corrosion: Based on available data, the classification criteria are not met.
Irritation: Causes serious eye irritation.
Causes skin irritation.Sensitization: Based on available data, the classification criteria are not met.
Mutagenicity: Based on available data, the classification criteria are not met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Toxic for reproduction: Based on available data, the classification criteria are not met.
STOT-single exposure: Based on available data, the classification criteria are not met.
STOT-repeated exposure: Based on available data, the classification criteria are not met
Aspiration hazard: Based on available data, the classification criteria are not met.
12.1. Toxicity
Toxicity information: Not established.
12.2. Persistence-degradability
Persistence-degradability: Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential: Not established.
12.4. Mobility in soil
Mobility in soil: Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment: The substance does not fulfil the
criteria to beidentified as PBT substance or vPvBsubstance
according to Annex XIII of RegulationREACH.
12.6. Other adverse effects
Environmental precautions: Avoid release to the environment.
13.1. Waste treatment methods
General: Avoid release to the environment.
Dispose in a safe manner in accordance withlocal/national regulations.
Dispose of this material and its container to hazardous orspecial waste
collectionpoint, in accordance with local, regional, national and/orinternational regulation.
14.1. Land transport (ADR-RID)
General information: Not regulated.
14.2. Sea transport (IMDG) [English only]
General information: Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information: Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for thesubstance or mixture
Safety, health and environmental: Ensure all national/local regulations are observed.
regulations/legislation specific for thesubstance or mixture
REACH Restrictions-Annex XVII: The components of this product are not subject torestrictions.
REACH Authorisation-Annex XIV: The components of this product are not subjectto authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment: It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic. vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 Further information : None. In accordance with REACH
Regulation (CE) Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[VANILLIN AR] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[VANILLIN AR] is available in small packing as well as in bulk. Buy premium quality [VANILLIN AR] and other lab chemicals from one of the most trusted brands.
