VANILLIN FOR SYNTHESIS LR
- Part number
- RXSOL-60-6605-816
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
It is used in flavorings, foods, perfumes, and pharmaceuticals. Vanillin is used as a chemical intermediate in the manufacture of several important drugs and other products.
Applications
Production of vanillin from guaiacol is synthesized through electrophilic aromation substitution on reaction with glycoxylic acid; which results in synthesis of vanillylmandelic acid which is then converted 4-hydroxy-3-methoxyphenylglyoxylic acid and vanillin by oxidative decarboxylation
Dosage and directions
Vanillin is most prominent as the principal flavor and aroma compound in vanilla. Cured vanilla pods contain about 2% by dry weight vanillin; on cured pods of high quality, relatively pure vanillin may be visible as a white dust or "frost" on the exterior of the pod.
Characteristics and notes
Vanillin is one of the components that contribute to the distinct aroma of vanilla. It is an organic crystal that forms on the outside of the vanilla bean. ... Fragrance oils that contain Vanillin or Ethyl Vanillin will oxidize faster than fragrance oils that do not contain this ingredient.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
||
| Product Type | VANILLIN FOR SYNTHESIS LR | ||
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation : VANILLIN
CAS No : 121-33-5
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : Xn; R22
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Specific Target Organ Toxicity - Single exposure - Category 2
- Warning (CLP : STOT SE 2) H371
Eye irritation - Category 2A - Warning (CLP : Eye Irrit. 2) H319
Acute toxicity, Oral - Category 4 - Warning (CLP : Acute Tox. 4) H302
Skin sensitisation - Category 1 - Warning (CLP : Skin Sens. 1) H317
3.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Hazard pictograms (CLP)
Signal word (CLP) : Warning
Hazard statements (CLP) : H302 - Harmful if swallowed
H317 - May cause an allergic skin reaction
H319 - Causes serious eye irritation
Precautionary statements (CLP) : P280 - Wear protective gloves/protective clothing/eye
protection/face protection
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing
3.3. Other hazards
No additional information available
4.1. Description of first aid measures
Inhalation : Remove to fresh air and keep at rest in a position comfortable for breathing.
Skin contact : Wash contaminated clothing before reuse. Wash with plenty of soap and
water. If skin irritation or rash occurs : Specific treatment (see on this label). Get medical
advice.
Eye contact : Get medical advice. If eye irritation persists : Remove contact lenses, if
present and easy to do. Continue rinsing. Rinse cautiously with water for several minutes.
Ingestion : Call a POISON CENTER or doctor if you feel unwell. Do NOT induce vomiting.
Rinse mouth.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Swallowing a small quantity of this material will result in
serious health hazard.
Causes serious eye irritation.
May cause an allergic skin reaction.
May cause damage to organs.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will
be present.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid
(reject) fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area. Avoid breathing dust, fume, gas, mist, vapours, spray.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : On land, sweep or shovel into suitable containers. Store away from
other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Personal protection : Do not breathe dust, fume, gas, mist, vapours, spray. Wash
thoroughly after handling. Do not eat, drink or smoke when using this product.
Handling : Do not eat, drink or smoke when using this product. Wash thoroughly after
handling. Avoid breathing dust, fume, gas, mist, vapours, spray. Wash contaminated
clothing before reuse. Contaminated work clothing should not be allowed out of the
workplace.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep
container closed when not in use.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Where exposure through inhalation may occur from use,
respiratory protection equipment is recommended.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Odour threshold : No data available.
pH value : Not applicable.
Melting point [°C] : 81 - 83 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : 400 °C
Flammability (solid, gas) : N/A
Flash point [°C] : 147°C
Boiling point [°C] : 170 °C
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : 1 mm Hg at 107 °C
Vapour density : 5.2
Density [g/cm3] : 1.056
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : 11 g/l @ 25°C
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : 4.3 (10 g/l)
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Acute toxicity : Oral: Harmful if swallowed.
Skin corrosion/irritation : Not classified
pH: 4.3 (10 g/l)
Serious eye damage/irritation : Causes serious eye irritation.
pH: 4.3 (10 g/l)
Respiratory or skin sensitisation : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified
Reproductive toxicity : Not classified
Specific target organ toxicity (single exposure) : Not classified
Specific target organ toxicity (repeated exposure) : Not classified
Aspiration hazard : Not classified
Potential adverse human health effects and symptoms : Harmful if swallowed.
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.
13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
Dispose of this material and its container to hazardous or special waste collection
point, in accordance with local, regional, national and/or international regulation.
14.1. Land transport (ADR-RID)
General information : Not regulated.
14.2. Sea transport (IMDG) [English only]
General information : Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information : Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[VANILLIN FOR SYNTHESIS LR] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[VANILLIN FOR SYNTHESIS LR] is available in small packing as well as in bulk. Buy premium quality [VANILLIN FOR SYNTHESIS LR] and other lab chemicals from one of the most trusted brands.
