Emergency Eye Wash Safety Shower
- Part number
- RXSOL-64-2610-001
- Category
- Safety Item
- Brand
- RXSOL
Overview
EMERGENCY EYE WASH / SAFTY SHOWERS
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-64-2610-001 |
| Product Type | Foam-Brite Condenser Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| Propylene Glycol | 57-55-6 | -- |
| Non-ionic surfactant blend | 61789-40-0 | -- |
| Sodium Metasilicate | 10213-79-3 | -- |
| Food grade colour dye | -- | |
| Water | 7732-18-5 | -- |
|
EYE CONTACT |
Watering, blurred vision, inflammation, and irritation which can result in |
|
SKIN CONTACT |
Irritation, dermatitis. |
| INGESTION | Nausea, vomiting irritation of gastrointestinal tract, |
|
INHALATION |
Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE | Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. |
|
If on SKIN |
Flush with large amounts of water. If irritation or burns occur, seek immediate medical attention. |
|
If in EYES |
Flush with large amounts of water for at least 15 minutes. Get medical attention if irritation persists. |
|
INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If SWALLOWED |
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give any thing by mouth to an unconscious person. |
| EXTINGUSING MEDIA | Use agents suitable for surrounding fires. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained breathing apparatus and other protective clothing. Hazardous decomposition products possible (see Section 10). Dike area as run-off may create additional environmental contamination |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | Decomposition forms toxic fumes of sodium oxide. Flammable gas may be produced on contact with metals. |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Keep people away. Wear chemical protective clothing. Stop discharge if possible. Isolate and remove discharged material. Flush and clean area with water |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Keep container closed and upright when not in use. Store only in polyethylene or glass containers. DO NOT USE METAL CONTAINERS. |
| OTHER PRECAUTIONS | Do not permit workers to handle product without proper training or proper protective equipment. Store in well-sealed containers, which are protected from physical damage. Empty containers may contain residues and vapours; treat as if full and observe all product precautions. Do not reuse container. KEEP OUT OF REACH OF CHILDREN. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved self-contained breathing apparatus. None required for normal use in adequately ventilated areas where TLV is not exceeded. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | Explosion proof |
| MECHANICAL (GENERAL) | Preferable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Rubber or neoprene |
| EYE PROTECTION | Chemical splash goggles (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Coveralls recommended. |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | >212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.10 |
| VAPOR PRESSURE (mm Hg) | 1 @ 77 F (20 C) |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | >1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | <1 |
| pH | 9.5 - 10.5 |
| APPEARANCE/ODOR | Clear Red Liquid/ Little or No Odour |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Oxidizers, acids and bases. |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
CO, CO, and fragmented hydrocarbons. |
|
HAZARDOUS POLYMERIZATION |
Will not occur |
| CHRONIC HEALTH HAZARDS |
No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
|
Ingredient Name |
Oral-Rat LD50 |
Inhalation-Rat LC50 |
|
Propylene Glycol |
N/D | N/D |
|
Sodium Metasilicate |
1153 mg/kg |
N/D |
Product is not volatile, and is miscible with water. Concentrations of BioClean PG in the air are expected to be extremely low because of its low vapour pressure. It is readily biodegraded in water or soil (via aerobic and anaerobic mechanisms).
If a spill should occur, Foam-Brite partitions almost equally in water and soil. Relatively little will go into the air because of its low vapour pressure. Is not expected to bio-accumulate and is considered to be practically non-toxic to fish and aquatic invertebrates on an acute basis except at very high concentrations.
|
Waste Classification |
Non-regulated liquid waste |
| Disposal Method | Dispose of all liquid waste in accordance with all local, state and federal regulations. |
|
Road & Rail Transport |
NA |
| Marine Transport | NA |
NA
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
---------------------------------------------------------------------------------------------------------------------------------------------------
| Product Name | RXSOL-64-2610-001 |
| Product Type | BioClean Cleaner Degreaser |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| Alkyl polyglycoside (coconut derived surfactant) | 68515-73-1 | -- |
| Propylene Glycol (Solvent) | 5131-66-8 | -- |
| Sodium Metasilicate | 6834-92-0 | -- |
| Trilon M Powder | 164462-16-2 | -- |
| Oil of Eucalyptus | -- |
| Irritation to eyes, nose, and throat Skin irritation, dermatitis, and defatting. | |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
|
INHALATION |
Nasal and respiratory irritation, dizziness, narcosis, headache, nausea, |
|
EYE CONTACT |
Watering, blurred vision, inflammation, and irritation which can result in |
|
SKIN CONTACT |
Irritation, dermatitis. |
| INGESTION | Nausea, vomiting irritation of gastrointestinal tract, |
| SUMMARY OF CHRONIC HAZARDS | Skin irritation, contact dermatitis, and defatting. |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE | Individuals with pre-existing or chronic diseases of the eyes, skin, respiratory system, cardiovascular system, gastrointestinal system, liver, or kidneys may have increased susceptibility to excessive exposure. |
|
If INHALED |
If overcome by exposure, remove victim to fresh air immediately. Give oxygen or artificial respiration as needed. Obtain emergency medical attention. Prompt action is essential. |
|
If on SKIN |
Immediately wash with soap and water. Remove and wash any contaminated clothing. |
|
If in EYES |
Flush with large amounts of water for at least 15 minutes. Get medical attention if irritation persists. |
|
If SWALLOWED |
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give any thing by mouth to an unconscious person. |
| FLASH POINT | N/A |
| EXTINGUSING MEDIA | Foam, dry chemical, CO2, or water fog. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained full face piece breathing apparatus and full body protective clothing. Hazardous decomposition products possible (see Section 10). Evacuate area. Dike area as run-off may create additional environmental contamination. |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | Foam or water can cause frothing. Heat may build up pressure and rupture containers. |
|
Environmental releases |
In the event of a spill, the focus is on containing the spill to prevent contamination of soil, surface or ground water. If BioClean does reach soil and water nearby, it is considered practically non-toxic to aquatic organisms and it biodegrades rapidly. If BioClean is present in a fire situation, it can produce toxic fumes. Proper protective equipment should beworn. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Shake well before using. Keep away from heat, sparks and open flames. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined, poorly ventilated areas, use NIOSH/MSHA approved air purifying or supplied air respirators duringsoldering operations until fumes have dissipated. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | Explosion proof |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Chemical resistant coveralls |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | >212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.04 |
| VAPOR PRESSURE (mm Hg) | N/D |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | <1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | >1 |
| pH | 11.0 |
| APPEARANCE/ODOR | Clear Green Liquid / Eucalyptus Odour |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Oxidizers, acids and bases. |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
CO, CO, and fragmented hydrocarbons. |
|
HAZARDOUS POLYMERIZATION |
Will not occur |
| CHRONIC HEALTH HAZARDS |
No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
Product is not volatile, and is miscible with water. Concentrations of BioClean PG in the air are expected to be extremely low because of its low vapour pressure. It is readily biodegraded in water or soil (via aerobic and anaerobic mechanisms).
If a spill should occur, Foam-Brite partitions almost equally in water and soil. Relatively little will go into the air because of its low vapour pressure. Is not expected to bio-accumulate and is considered to be practically non-toxic to fish and aquatic invertebrates on an acute basis except at very high concentrations.
|
Waste Classification |
Non-regulated liquid waste |
| Disposal Method | Dispose of all liquid waste in accordance with all local, state and federal regulations. |
NA
NA
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
---------------------------------------------------------------------------------------------------------------------------------------------------
| Product Name | RXSOL-64-2610-001 |
| Product Type | Ice Machine Cleaner |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| Lactic Acid | 50-21-5 | -- |
| Citric Acid | 5949-29-1 | -- |
| Filtered Water | -- |
| Not classified as a Dangerous Goods under NZS 5433 | 2007 Transport of Dangerous Goods on Land. |
|
Classified as hazardous according to criteria in the HS (Minimum Degrees of Hazard) Regulations 2001. |
|
|
Subclass 8.3 Category A |
Substances that are corrosive to ocular tissue. |
|
Subclass 8.2 Category C |
Causes serious eye damage |
| Causes severe skin burns and eye damage | |
| Keep out of reach of children | |
| Read label before use | |
| Wear protective gloves |
|
Inhalation |
Remove victim from area of exposure - avoid becoming a casualty. Remove contaminated clothing and loosen remaining clothing. Allow patient to assume most comfortable position and keep warm. Keep at rest until fully recovered. Seek medical advice if effects persist. |
|
Skin Contact |
If skin or hair contact occurs, immediately remove any contaminated clothing and wash skin and hair thoroughly with running water. If swelling, redness, blistering or irritation occurs seek medical assistance. |
|
Eye Contact |
Immediately wash in and around the eye area with large amounts of water for at least 15 minutes. |
| FLASH POINT | None |
| EXTINGUSING MEDIA | Use agents appropriate for surrounding fires. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained breathing apparatus (SCBA) and other protective clothing. Hazardous decomposition products possible (see Section 10). Evacuate immediate area. |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Evacuate area and keep upwind until gas has dispersed. Dike spill. Dilute with water fog (direct application of alkali may cause violent splattering). Neutralize with Soda Ash then sweep/shovel up spills or use an industrial vacuum cleaner Persons not wearing protective equipment and clothing should be restricted from areas of spills or leaks until clean up has been completed. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Keep container closed and upright when not in use. Do not store near heat, sparks, or open flames. This product will attack glass, concrete and certain metals. Store only in plastic containers. DO NOT USE METAL CANS. |
| OTHER PRECAUTIONS | Refrain from splashing product when pouring. Avoid all contact with skin or clothing. Empty containers may contain residues and vapours. KEEP OUT OF REACH OF CHILDREN. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
In confined poorly ventilated areas,use NIOSH/MSHA P2 approved air purifying or supplied air purifying or supplied air respirators. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | N/A |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear acid resistant gloves (neoprene, PVC, butyl rubber). EYE PROTECTION: Full-face shield and chemical splash goggles (ANSI Z-87.1 or equivalent). |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | Acid resistant vinyl or polyethylene coated coveralls. |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | >212 @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 1.27 |
| VAPOR PRESSURE (mm Hg) | 3.4 @ 68 F (20 C) |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | 1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | <1 |
| pH | 11.0 |
| APPEARANCE/ODOR | Clear Liquid / Irritating Odour |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable under normal conditions of use. |
|
CONDITIONS TO AVOID |
Avoid exposure to heat. |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
Incompatible with strong oxidising agents, alkalis, carbon steel and sources of ignition. The solution will very slowly corrode mild steel and soften concrete. |
|
HAZARDOUS POLYMERIZATION |
Will not occur |
|
Swallowed |
No adverse effects expected, however, large amounts may cause nausea and vomiting. Swallowing may result in irritation of the mouth and throat. Frequent or large oral doses can cause tooth erosion. |
|
Eye |
A severe eye irritant. Contamination of eyes can result in permanent injury |
|
Skin |
Contact with skin may result in irritation. |
| Inhaled | May cause irritation to the nose and lungs. Use in fresh air recommended. |
| Ecotoxicity Effects | Highly toxic for fish, not considered to be toxic for bacteria. |
| Degradability | Easily biodegradable. |
| Disposal Method | Dispose of absorbed materials and liquid waste in accordance with all local, state and federal regulations. |
| Road & Rail Transport |
Not classified as a Dangerous Goods under NZS 5433:2007 |
| Marine Transport | Not classified as Dangerous Goods by the criteria of the international Air Transport Association (IATA) NON DANGEROUS GOODS. |
|
Classification |
Classified as hazardous according to criteria in the HS (Minimum Degrees of Hazard) Regulations 2001. |
| Subclasses | Subclass 6.1 Category E - Substances which are acutely toxic. |
| Subclass 6.3 Category B | Substances that are mildly irritating to the skin. |
| Subclass 8.3 Category A | Substances that are corrosive to ocular tissue. |
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
---------------------------------------------------------------------------------------------------------------------------------------------------
| Product Name | RXSOL-64-2610-001 |
| Product Type | Bluey Leak Detector |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | CAS No. | UNITS |
| Thickening agent | 78330-23-1 | -- |
| Alcohol Ethoxysulphate | 9004-82-4 | -- |
| Blue dye food grade | -- | |
| Filtered water | 7732-18-5 | -- |
| SUMMARY OF ACUTE HAZARDS | None known. |
| ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS | |
|
INHALATION |
None |
|
EYE CONTACT 5.4A |
May cause serious eye irritation. |
| SKIN CONTACT 6.3A | May cause skin irritation |
| INGESTION |
May cause nausea and vomiting. Not expected to produce toxic effects unless large amounts are ingested. |
| SUMMARY OF CHRONIC HAZARDS | None known. |
| MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE | None known. |
|
If INHALED |
N/A |
|
If on SKIN |
Wash with water. |
|
If in EYES |
Flush eyes with large amounts of water. Get medical attention if irritation persists. |
| If SWALLOWED | If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. |
| FLASH POINT | None |
| EXTINGUSING MEDIA | Non-flammable. Use agents appropriate for surrounding fires |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear self-contained full face piece breathing apparatus and other protective clothing. |
| UNUSUAL FIRE AND EXPLOSION HAZARDS | None |
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED |
Use absorbent materials to prevent footing hazard and to contain. |
|
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING |
Keep container closed and upright when not in use. |
| OTHER PRECAUTIONS | Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues; treat as if full and observe all products precautions. Do not reuse empty containers. |
|
RESPIRATORY PROTECTION (SPECIFY TYPE) |
None required. |
| VENTILATION - LOCAL EXHAUST | Acceptable |
| SPECIAL | N/A |
| MECHANICAL (GENERAL) | Acceptable |
| OTHER | N/A |
| PROTECTIVE GLOVES | Wear rubber gloves. |
| EYE PROTECTION | Safety glasses (ANSI Z-87.1 or equivalent) |
| OTHER PROTECTIVE CLOTHING OR EQUIPMENT | N/A |
| WORK/HYGIENIC PRACTICES | Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. |
| BOILING POINT | 212 F (100 C) @ 760mm Hg |
| SPECIFIC GRAVITY (H20 = 1) | 0.99 |
| VAPOR PRESSURE (mm Hg) | < 1 @ 68 F (20 C) |
| MELTING POINT | N/A |
| VAPOR DENSITY (AIR = 1) | >1 |
| EVAPORATION RATE (ETHYL ACETATE = 1) | <1 |
| APPEARANCE/ODOR | Blue Liquid / Mild Odour |
| SOLUBILITY IN WATER | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None |
|
INCOMPATIBILITY (MATERIALS TO AVOID) |
None |
| HAZARDOUS DECOMPOSITION PRODUCTS | CO, CO, and fragmented hydrocarbons. |
| HAZARDOUS POLYMERIZATION | Will not occur. |
| CHRONIC HEALTH HAZARDS | No ingredient in this product is an IARC, NTP or OSHA listed carcinogen. |
|
Ingredient Name |
N/A |
|
Ingredient Name |
N/A |
| Waste Classification | Non-regulated liquid waste. |
| Disposal Method | Dispose of absorbed materials and liquid waste in accordance with all local, state and federal regulations. |
| Road & Rail Transport |
Not classified as a Dangerous Goods under NZS 5433:2007 |
| Marine Transport | Not classified as Dangerous Goods by the criteria of the international Air Transport Association (IATA) NON DANGEROUS GOODS |
|
Ingredient Name |
SARA 313 | TSCA Inventory | CERCLA RQ | RCRA Code |
| N/A | No | All ingredients listed | N/A | N/A |
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
--------------------------------------------------------------------------------------------------------------------------------------------------
Availability
Emergency Eye Wash Safety Shower manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Emergency Eye Wash Safety Shower at a competitive price from us. We have ready stock of Emergency Eye Wash Safety Shower in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
