Poultry and Animal Feed Additive
Sodium Citrate Anhydrous
Sodium citrate anhydrous is a tribasic salt of citric acid. It's a white, granular crystal that's odorless, salty, and soluble in water. It's also non-toxic, low reactive, and has a porous matrix
- Part number
- RXSOL-19-3780-256
- Category
- Poultry and Animal Feed Additive
- Brand
- RXSOL
Overview
Trisodium citrate has the chemical formula of Na₃C₆H₅O₇. It is sometimes referred to simply as "sodium citrate", though sodium citrate can refer to any of the three sodium salts of citric acid.
Trisodium citrate has the chemical formula of Na₃C₆H₅O₇. It is sometimes referred to simply as "sodium citrate", though sodium citrate can refer to any of the three sodium salts of citric acid.
Characteristics and notes
Applications of Infidient Sodium Citrate:
Food & Beverage: Acts as a flavoring agent, preservative, and pH regulator in beverages, dairy products, and processed foods.
Pharmaceuticals: Used as a stabilizer and buffering agent in medications.
Industrial: Effective in metal cleaning and electroplating processes.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Porduct Name | Tri Sodium Citrate |
| Part Number | RXSOL-19-3785-025 |
acCompany Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Weight | Formula |
| Tri-Sodium citrate Anhydrous ESSENTIAL USP,FCC,E 331 | 68-04-2 | 200-675-3 | 258,07 g/mol | C6H5Na3O7 |
| Signal Word | No data available |
| Hazard Statements | No data available |
| Precautionary statements | No data available |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher |
| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance |
| If inhaled | After inhalation fresh air. |
| Eye Contact | After eye contact rinse out with plenty of water. Remove contact lenses. |
| Swallowed | After swallowing make victim drink water (two glasses at most). Consult doctor if feeling unwel |
| Skin Contact | In case of skin contact Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| Inhalation | No data available |
| Ingestion | No data available |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Flammability | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given |
| Special hazards arising from the substance or mixture | Carbon oxides Sodium oxides Combustible. Development of hazardous combustion gases or vapours possible in the event of fire. |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system |
|
Hazardous combustion products |
No data available |
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Spillage | No data available |
| Personal Protection | No data available |
| Enviromental Precaution | Do not let product enter drains. Risk of explosion. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area |
| Reference to other sections | For disposal see section 13 |
| Advice on protection against fire and explosion | No data available |
| Incompatible materials | No data available |
| Hygiene measures | No data available |
| Advice on safe handling | No data available |
| Conditions for safe storage, including any incompatibilities |
No data available |
| Storage conditions | Tightly closed. Dry. Recommended storage temperature see product label. |
| Storage class | Storage class (TRGS 510) 11 Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | No data available |
| Exposure controls | Personal protective equipment |
| Engineering Control | No data available |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Body Protection | No data available |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Viton® Minimum layer thickness: 0,7 mm Break through time: 480 min Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M) This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: butyl-rubber Minimum layer thickness: 0,7 mm Break through time: 30 min Material tested:Butoject® (KCL 898) |
| Respiratory protection |
Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type Filter type P3 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Other Protection Measure | No data available |
| Physical state | Solid |
| Colour | White |
| Odour | Odorless |
| Odor Threshold | No data available |
| pH | 7,5 - 9,0 at 10 g/l at 20 °C |
| Melting Point | 150 °C - (decomposition) |
| Boiling Point | No data available |
| Flash Point | 145 °C - closed cup |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | No data available |
| Explosive limits | No data available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Viscosity | No data available |
| Density | 1,76 g/cm3 at 18 °C |
| Relative Density | 1,857 at 20 °C |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | ca.425 g/l at 25 °C |
| Ignition temperature | No data available |
| Particle characteristics | No data available |
| Reactivity | The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibilityof hazardous reactions | Violent reactions possible with Strong oxidizing agents |
| Conditions to avoid | No data available |
| Incompatible materials | No data available |
| Hazardous product dicomposition | No data available |
| Acute toxicity | LD50 Oral - Mouse - male and female - 5.400 mg/kg (OECD Test Guideline 401) Symptoms: Ingestion causes burns of the upper digestive and respiratory tracts. Inhalation: No data available LD50 Dermal - Rat - male and female - > 2.000 mg/kg (OECD Test Guideline 402) |
| Skin corrosion/irritation | Skin - Rabbit Result No skin irritation - 4 h (OECD Test Guideline 404) |
| Serious eye damage/irritation | Eyes - Rabbit Result No eye irritation (OECD Test Guideline 405) |
| Respiratory or skin sensitization | Maximization Test - Guinea pig Result negative (OECD Test Guideline 406) |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | Test Type Ames test Test system Salmonella typhimurium Metabolic activation with and without metabolic activation Method OECD Test Guideline 471 Result negative |
| Reproductive toxicity | No data available |
| Specific target organ toxicity- single exposure |
No data available
|
| Additional Information | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Millipore- 1.11037 Page 7 of 9 The life science business of Merck operates as MilliporeSigma in the US and Canada To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. After uptake of large quantities: Bloody vomiting disturbed electrolyte balance. However, when the product is handled appropriately, hazardous effects are unlikely to occur. Handle in accordance with good industrial hygiene and safety practice |
| Persistence and degradability | Biodegradability Result: 90 % - Readily biodegradable. (OECD Test Guideline 301D) |
| Toxicity to fish | LC50 - Poecilia reticulata (guppy) - > 18.000 - 32.000 mg/l - 96 h (IUCLID) |
| Toxicity to daphnia and other aquatic invertebrates | EC50 - Daphnia magna (Water flea) - 5.600 - 10.000 mg/l - 48 h (IUCLID) |
| Toxicity | No data available |
| Toxicity to bacteria | EC50 - Pseudomonas fluorescens - > 1.800 - 3.200 mg/l - 8 h (IUCLID) |
| Toxicity to algae | IC50 - Chlorella vulgaris (Fresh water algae) - > 18.000 - 32.000 mg/l - 96 h (OECD Test Guideline 201) |
| Products Biodegradation | No data available |
| Mobility in soil | No data available |
| Results of PBT av PvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Product | Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself. See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions |
| Contaminated packaging | No data available |
| Waste treatment Method | No data available |
| UN number |
ADR/RID:- IMDG:- IATA:- |
| UN proper shipping name | ADR/RID:Not dengeours goods IMDG:Not dengeours goods IATA:Not dengeours goods |
| Transport hazard classess | ADR/RID:- IMDG:- IATA:- |
| Packaging group | ADR/RID:- IMDG:- IATA:- |
| Environmental hazards |
ADR/RID:Yes IMDG Marine pollutant:Yes IATA: No |
| Special precautions for user | No data available |
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| Other regulations | No data available |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. .DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable |
Availability
Sodium Citrate Anhydrous supplier in India United Arab Emirates, Oman. Sodium Citrate supplier Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Surat, Gandhidham, Fujairah, Dubai, Sharjah, Ajman, Ruwi, Ghala, Barka, Sohar, Muscat Oman
