Your shopping cart is empty.
Product Code: RXSOL-37-1003-025
It contains Sodium Tolyltriazole ( CAS No- 64665-57-2 ) which is mainly used as antirust and corrosion inhibitor for metals (such as silver, copper, zinc, lead, nickel, etc..), and for antirust oil (tallow) products, the gas phase corrosion inhibitor of copper and copper alloy, lubricant additive, cycle water treating compound and auto antifreeze. It also can be used with manifold sterilization algaecide and has a very fine corrosion mitigation effect on close cycle cooling water system.
THERMIC FLUID DE-CARBONIZING chemical is liquid oil based formulation of dispersing agents, surface active agents, detergents, penetrates, emulsifier alongwith corrosion inhibitor.
To clean hardened, carbonized deposits from a thermic fluid boiler, you need specialized chemical cleaners known as thermic fluid system cleaners or decarbonizers. These products are powerful blends of chemicals designed to penetrate and dissolve the tough, waxy, and carbonaceous deposits that accumulate in the system.
Keep contianer tightly closed, And away from children.
NOTE :::
we are Carbon Cleaner manufacturers and no-1 holding position as Carbon Cleaner suppliers in gandhidham, surat, mundra, sikka, mumbai, jnpt, manglore, kakinada, visakhapatnam, vizag, ennore, chennai, goa, fujairah, dubai, sharjah, middle east. RXSOL brand name is kept under reputed Carbon Cleaner producers and Carbon Cleaner exporters.
Product Code: RXSOL-41-1046-025
Pl. refer below our various grade of cleaner :
GP DEGREASER
General Purpose Emulsifier Cleaner
A general oil and grease remover for deck and engine room. Most suitable for removal of oil and grease from machinery parts, tank tops, bulkheads, decks and floor plates, and especially for Tank cleaning. It is also used for cleaning of cargo tanks, bunker tanks and for spot cleaning.
HAND CLEANER
Removes Heavy Industrial Soiling
Powerful hand cleaner for removing heavy industrial soiling. Solvent-free formula. Rapidly emulsifies with all types of soil to ensure effective cleaning. Cleans and moisturizes the hands and prevents skin irritation. Have a pleasant fresh fragrance. Available in pumps, dispensers and wall bucket lids.
TANK CLEAN ALKALINE EXTRA
Alkaline cleaner/Pet Coke cleaner
Used for removing hardened oxidized oil and grease deposits and for cleaning pet coke, boiler furnace, etc. It is also used as a final treatment for cleaning tanks from black to white or grain and is safe on epoxy and polyurethane tank coatings.
QUICK SPLIT CLEANER
Separating Tank and General Cleaner
A heavy-duty tank and bilge cleaner. It is used for cleaning and gas freeing of mineral oil tanks and for cleaning of tanks upgrading from black to white or grain. It can also be used as a general cleaner in the engine room and especially for cleaning bilges. It’s suitable for removal of most mineral oils, fats, and grease.
ELECTRO CLEAN CF
Non-Conductive Electric Cleaner
Used as a special de-greasing agent for removal of oil & grease from electrical components, machine parts, ball bearings, etc. It is odorless and evaporates without leaving residue. It does not contain chlorinated hydrocarbons or harmful chemicals and does not emulsify in water. It has a high flash point.
MULTI CLEANER
Biodegradable Cleaner
A superior liquid detergent with good foaming properties. The active wetting agents give rapid penetration to remove light oil and dirt from all surfaces. It is used in the galley, accommodation and engine room aboard ships, launches and maintenance department of all industries. Also used for cleaning reefer boxes, woodwork and decks.
RUST REMOVER
Rust Cleaner
An excellent tank cleaner for removing oxides, chlorides, nitrates, amides, amines, and other salts. Useful for cleaning the white powders appearing after loading vegetables and fatty acid oil additives. It also removes lime deposits that can occur after hot seawater washing. It cleans and brightens metals and forms a protective coating on treated surfaces. It’s biodegradable and non-flammable.
AIR COOLER CLEANER
A liquid cleaner containing solvents and surface-active agents for on-line and off-line cleaning of charge air coolers. It has been developed for safe, fast and economical in-service cleaning of the air handling systems of turbo charged diesel engines. By using ACC, airborne contaminants that have been carried into and deposited on scavenger air trunks, air coolers and inlet valves are removed.
CARBON REMOVER NC
Solvent Emulsifier
Used undiluted for breaking down and separating residual combustion products and by-products of distillation of mineral oils. It’s suitable for cleaning burner tips, lube/fuel oil filters, oil coolers, fuel injectors and machines parts. It quickly dissolves deposits containing carbon, resins or varnishes and eliminates the need for hand scraping.
DESCALER POWDER
Product Code: RXSOL-19-3068-210
| Formula | C2H4O |
| Molecular Weight/ Molar Mass | 44.05 g/mol |
| State | Liquid |
| Appearance (Color) | Colorless |
| Purity (GC) | > 99.00 % |
| Density | 0.784 g/cm3 |
| Boiling Point | 20.2 °C |
| Melting Point | -123.5 °C |
Product Code: RXSOL-94-9427-035
Product Code: RXSOL-94-9425-050
Product Code: RXSOL-19-6605-320
TECHNICAL SPECIFICATION
Product Code: RXSOL-35-2066-2032
Yellowish liquid
Density (20 °C): 880 kg/m3
Dyn. viscosity (25 °C): 23 m Pa.s.
Product Code: RXSOL-39-3901-005
| Form | Liquid |
| State | Clear |
| Odour | Fresh |
| Boiling point and boiling range | 0°C |
| Flash Point | Not applicable |
| Freezing Point | 100°C |
| pH | 13.0 - 14.0, 100 % |
Filter Clean Special HD – Coil Cleaning Procedure
Before Starting:
Ensure the unit and all fans are turned off for safety.
Mix 1 part Filter Clean Special HD with 5 parts water.
Important: Always add water to the sprayer tank first, then add Filter Clean Special HD.
(add Filter Clean Special HD first, then water.)
Using a sprayer, thoroughly spray the cleaning solution on the coil plates.
Ensure complete coverage on all surfaces of the plates.
Allow the cleaning solution to remain on the surface for 5–15 minutes to loosen dirt, grease, and residues.
Rinse off all coil surfaces using a hose or the system’s built-in spray nozzles (if equipped).
Use hot water, if available, for enhanced cleaning performance.
For heavily soiled units, repeat Steps 2 through 4 until the coils are fully clean.
Product Code: RXSOL-20-1102-210
Product Code: RXSOL-81-3067-100
| Parameter | Unit | Typical Value |
|---|---|---|
| Appearance | – | Clear to pale yellow liquid |
| pH | – | 3.5 – 5.5 |
| Density @ 25°C | g/cm³ | 1.08 +/- 0.05 |
| Solubility | – | Miscible with water and hydrocarbons |
Broad-spectrum CMIT/MIT-based diesel biocide formulated in dipropylene glycol to control bacterial and fungal contamination in fuel storage systems. Prevents sludge formation, corrosion, and fuel degradation. Powerful diesel biocide combining CMIT/MIT actives for long-term microbial protection. Keeps diesel clean, prevents filter clogging, and protects tanks from corrosion. Advanced isothiazolinone biocide for diesel and fuel systems. Controls microbial growth, protects against corrosion, and extends fuel life. Effective fuel preservative that kills bacteria and fungi in diesel storage tanks, preventing sludge and fuel spoilage.
Product Code: RXSOL-45-1503-005
ACID inhibitor for Citric Acid.
Acids and corrosive materials are used to enhance production and to stimulate reservoirs therefore special care is required to ensure that casing, tubing strings and downhole equipment are not damaged. Blend of ACID with Citric Acid Corrosion Inhibitor protect your downhole equipment and metal tubulars.
Product Code: RXSOL-20-2001-222
Product Properties
|
Colour |
Clear light brown liquid |
|
|
|
Density |
In g/cm3 at 15°C: 0.99 |
|
|
|
Flash Point |
(PMCC)°C: Above 62 |
|
|
|
Copmtibility |
|
|
When mixed with water, a clear emulsion is formed. |
|
Metal |
No known effect |
|
|
|
Rubber |
May swell |
|
|
|
Sythetic Rubber |
May swell |
|
|
|
Packaging |
RXSOL-20-2001-222 |
(in Litres) |
Flash Point : > None |
Using-Procedure
Spraying:–
This can be beneficial as part of the initial cleaning process after the carriage of Lube oils and Lube oil additives. As soon as the tank in question has been checked empty by the attending surveyor, RXSOL-20-2001-210 should be sprayed over all surfaces which are safely reacheable.
Portable machines:–
After 45 minutes the butterworth machines should be operated for 3 x 20 minutes drops using warm 60o C, then the machines brought back to the top and a full hot wash 80 – 85 o C should be carried out for at least 6 hours.
Fixed machines:–
Wash ambient for 45 minutes followed by warm water for one cycle before increasing to hot (80oC) for 4 hours.
Injection:–
This can be carried out by injecting RXSOL-20-2001-210 into the butterworth system after the heater. A normal amount to use would be 100 – 150 liters during the initial washing cycle. Water temperature should be 60o C during the injection period then brought up to 80 – 85 o C for the full washing period.
Re-circulation:–
Possibly the best result are achieved by re-circulating a solution of RXSOL-20-2001-210 after the initial rough washing of the tank. A sufficient amount of fresh water to maintain good suction should be heated to 60 o C and approximately 420 liters of RXSOL-20-2001-210 (2 drums) added for each 500 liters of fresh water. The temperature of the mixture can be increased depending upon the melting point if the product being cleaned. The solution should be circulated for at least 4 hours and the butterworth machines operated at maximum pressure in all areas of the tank throughout this process. If a number of tanks are to be circulated, then a substantial quantity of solution can be made so that transfers can be made without delay and any small amounts lost will not affect the operation. Normally following transfer to another tank, 100 liters RXSOL-20-2001-210 is added for each 5000 liters of solution. This is called “spiking”.
Following the re-circulation process, the tank must be hot butterworthed 80-85o C for at least 6 hours.
*Use a strainer at the pumpstack when circulating any solution RXSOL-20-2001-210 is recommended for local cleaning and degreasing and may be applied by brush, hand spray, immersion, soaking or any other conventional means. Apply concentrate RXSOL-20-2001-210 over soiled area and wait for 20-30 minutes before rinsing off with water.
Soak Method:-
For heavy oil and soil Put parts to be cleaned into a bath of concentrate RXSOL-20-2001-210 and for medium to light soiling use a solution of 10-30% RXSOL-20-2001-210 in water. Parts should be soaked for at least 30 minutes before washing off with water.
Spray-Method:-
Spray concentrate RXSOL-20-2001-210 over all soiled areas. With in 15 and 30 minutes, RXSOL-20-2001-210 starts its function then rinse off by water hose. For stubborn deposits, agitation by scrubbing will assist the cleaning operation .
Cargo Tank Cleaning after Mineral Oils
Direct injection method:–
Make a solution of RXSOL-20-2001-210 between 0.1 and 2.0% i.e. one to twenty litres per ton wash water. Then use with Tank cleaning machine , Best results are obtained when water is heated to a temperature between 60 to 80°C. Slops Should be Constantly Stripped from, tank.
Recirculation method / Ship's Rocking Mottion:–
Make soln. Strength with RXSOL-20-2001-210 between 0.5 –3 % and used with Tank Cleaning machines OR fill the tank to 20-30% volume with sea water and add the RXSOL-20-2001-210 up to full dose . For better results heat the solution between 60 - 80°C.
NOTE : Dose rate and results will vary depending on amount of contamination.
Spot cleaning- RXSOL-20-2001-210 (concentrate) can be sprayed over surfaces and left for 20 - 30 minutes Finally wash down the tank surfaces with hot water between 60°C and 80°C with high pressure machine . Keep stripping tank slops and transfer to holding tank/slop tank.Cleaning of theOil side of Lube Oil Heat Exchangers Cleaning is best achieved by the recirculation method using a heated 20% solution of RXSOL-20-2001-210.
1) First of all drain off any remaining oil from Heat Exchanger.
2) Connect the discharge side of a portable pump to the lower heat exchanger connection & the suction Side of the pump to the bottom outlet of a 200 litre drum.
3) Complete the circuit by connecting the upper connection on the heat exchanger to the top of the drum.
4) Maintain the bath temperature between 60-80 0 C throughout the cleaning operation. If it is not possible to heat, the operation will need to be extended.
5) Use the pump to maintain circulation for 12 to 15 hours. When the cleaning is completed, disconnect the lower heat exchanger connection and drain out the cleaning solution.
6) Connect a fresh water supply to the upper heat exchanger connection, and rinse until the water runs clean from the lower connection. When rinsing is complete, disconnect the water supply and thoroughly drain and dry the heat exchanger
