Your shopping cart is empty.
Product Code: RXSOL-67-6605-030
TECHNICAL SPECIFICATION
Product Code: RXSOL-12-1880-220
TECHNICAL SPECIFICATIONS :
| Appearance/nature | : Viscous flowable liquid |
| Colour | : Colourless to pale yellow |
| on APHA (20% aqueous solution), maximum | : Characteristic |
| Odour | : 500-234-8 |
| pH (1 % aqueous solution) | : 6.8-8.5 |
| Active Matter, % by mass minimum | : 68 |
| Molecular Weight | : 384 |
| Sulfate, % by mass as Na2SO4, maximum | : 1.5 |
| N.D.O.M.,% by mass(on 100% A.M.basis), max | : 3.0 |
| 1, 4 - Dioxane (on 100% A.M. basis), ppm, max | : 30 |
| Iron content as Fe, ppm, maximum | : 5 |
| Heavy metals as Pb, ppm, maximum | : 15 |
| Microbial count, TVC, cfu/ml | : < 10 |
Certificate of Analysis according to DIN 55350-18-4.2.2
| Sr.No | Characteristic / Method | Unit | Value | Lower Limit | Upper Limit |
| 1. | Appearance @25 °C 93000601 | Confirms | Transparent to yellowish Flowable Paste | ||
| 2. | Odour 93000701 | Confirms | Conform to STD | ||
| 3. | Active Ingredient (M.W.384) ISO 2271 | % | 69.2 | 69.00 | 70.00 |
| 4. | pH 3% Solution ISO 4316 | 7.2 | 7.00 | 9.00 | |
| 5. | Sodium Sulfate Method No. 920015-01 | % | 0.3 | 1.00 | |
| 6. | Unsulfated Matter Method No. 970064-02 | % | 2.4 | 2.80 | |
| 7. | Dioxane (as is) Method No 920021-01 | ppm | 21 | 30 | |
| 8. | Colour APHA (20% Sol. @25 °C) ISO 6271 | 16 | 25 | ||
| Packing / Production Date | |||||
| Expiry Date / Shelf Life | |||||
SLES is an anionic surfactant and classified under alkyl ether sulfates. It is obtained by combining a fatty alcohol such as coconut oil with ethylene oxide and subsequent sulfonation.
SLES is available in three forms:
Liquid SLES : Viscous Liquid
PASTE SLES : JELLY form
Powder SLES : Snow White
Product Code: RXSOL-33-3321-250
PHYSICAL & CHEMICAL PROPERTIES
These properties are typical. Refer to the Material Safety Data Sheet (MSDS) SECTION 9, for the most current data.
| Color: | Clear, Yellow |
| Form: | Liquid |
| Odor: | Slight ammonia smell |
| Density: | 11.33 lb/gal |
| Specific Gravity @ 25oC (77oF): | 1.36 |
| pH (Neat): | 10.5 |
| Freeze-Thaw Recovery: | Complete |
| Viscosity @ 25oC (77oF): | 20 cp |
| Flash Point (PMCC): | None |
| Solubility in Water: | Complete |
| Freeze Point: | 32oF (0oC) |
| Volatile Organic Compounds (VOC): | 0% |
RXSOL Membrane Antiscalant ALKA 191T is a high-performance threshold antiscalant designed to stabilize a wide range of supersaturated salt solutions, helping to prevent scale formation and maintain efficient RO system operation.
It incorporates to improve the reliability of scale control by ensuring accurate and consistent dosing, thereby enhancing membrane protection and system performance.
RO antiscant
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.
RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.
Key Features and Benefits
It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant . It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Key Features and Benefits
Application and Dosage
Our RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.
At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used.
Antiscalant RO RXSOL-33-3302-025
Antiscalant C.I ALKA RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T RXSOL-33-3321-030
Antiscalant ORG EV 2030 RXSOL-33-3325-230
Antiscalant RXSOL ORG EV RXSOL-33-3327
Product Code: RXSOL-23-6830-025
| Parameters | Value |
|---|---|
| Appearance | Clear, Liquid |
| Odor | Charateristic |
| pH | 1-2 |
| Solubility | Highly miscible |
| Density | >1.2 |
Some key features of RXSOL Offshore Descaler
Product Code: RXSOL-46-6543-001
Product Code: RXSOL-67-1119-210
| PRODUCT NAME | : | DI ETHANOL AMINE |
| CAS number | : | 111-42-2 |
| UN number | : | 2735 |
| Formula | : | (HOCH2CH2)2NH |
| Odour | : | AMMONIA LIKE |
| Solubility in water | : | COMPLETE |
| Density | : | 1.09 at 20 oC |
| Boiling point | : | 269 oC |
| Melting point | : | 28 oC |
| Viscosity | : | |
| Flashpoint | : | 152 oC |
| Explosive limits | : | 0.1 mbar at 20 oC |
| Vapour pressure | : | 0.1 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 3 ppm 15 mg/m3 |
| Pollution category 1994 | : | D |
DEA produced a dose-dependent decrease (58%) in the antibody-forming cell response to sheep erythrocytes at an 800 mg kg−1 exposure level.
Product Code: RXSOL-45-1797-025
CAS No.: 31566-31-1
HS Code: 29157030
Molecular Formula: C21H42O4
Molecular Weight: 358.57 g/mol
Appearance: White to yellowish solid
Density: 0.95 – 1.05 g/cm³
Solubility: Soluble in water, ethanol, and glycols
Analysis Results Parameters Units STD Specs Report
Appearance Clear off white Passes
Iodine Value cc/100gm 3.0 Max 0.65
Acid Value 2.85
Saponification Value 166.35
Melting Point 55.7 mg KOH/gm 6.0 Max mg KOH/gm 145 - 170 °C 55 - 60
Monoglyceride 40.38
Free Glycerin: 4.55 % 40.0 Min % 7.0 Max
Remarks: Quality of the above Product is tested at our Lab and found within the limits of Standard Specifications.
Glycerol Monostearate is valued for its multifunctional performance, stability, and broad industrial applicability, making it an essential ingredient in modern formulations.
Product Code: RXSOL-94-6604-025
Product Code: RXSOL-43-1196-050
Engineered for maximum efficacy and stability across a wide range of industrial and institutional applications.
Product Code: RXSOL-33-3325-235
Antiscalant ORG EV 2035 has been specifically developed with enhanced scale inhibition and dispersant properties to provide superior control of fouling throughout the entire distillation plant.
Improved Scale Control: Effectively inhibits alkaline scale formation across a wide range of operating conditions, including high Top Brine Temperatures (TBT).
Enhanced Dispersancy: Keeps suspended solids and precipitated salts dispersed in the system, preventing deposit buildup and sludge formation.
Reduced Fouling: Minimizes particulate fouling on heat transfer surfaces, helping to maintain optimal thermal efficiency and plant performance.
Lower Cleaning Frequency: Reduces the need for frequent chemical cleaning and maintenance shutdowns, leading to increased operational uptime.
Cost Savings: Decreases maintenance costs, cleaning chemical consumption, labor requirements, and production losses associated with fouling-related downtime.
Improved Plant Reliability: Helps maintain stable and efficient operation of Multi-Stage Flash (MSF) and other thermal desalination systems.
Extended Equipment Life: By reducing scale and deposit accumulation, Belgard EV2035 contributes to the protection and longevity of heat exchangers and other critical plant components.
With its advanced polycarboxylic acid-based formulation, Antiscalant ORG EV 2035 provides comprehensive fouling control, enabling distillation plants to operate more efficiently, reliably, and economically over extended operating periods.
Product Code: RXSOL-60-1050-025
Sodium citrate, (molecular formula: Na3C6H5O7 • 2H2O) has molecular weight of 294.1, is a colorless crystal or white crystalline powder product; it is odorless, salty taste, and cool.It will lose its crystal water at 150 °C and will be decomposed at even higher temperature. It also has slight deliquescence in wet air and has weathering property upon hot air. It is soluble in water and glycerol, but insoluble in alcohol and some other organic solvents.
Physical Properties:
| Melting point | >300 °C(lit.) |
| Density | 1.76 |
| Flash point | 173.9 °C |
| Storage temprature | Store at +5°C to +30°C. |
| Solublity | H2O: 100 mg/mL |
| Form | Powder |
| Colour | White |
| PH | 7.0-9.0 |
| Water solublity | 720 g/L (25 ºC) |
| Stability | Stable. Incompatible with bases, reducing agents, oxidizing agents. |
Product Code: RXSOL-19-1048-025
Ammonium heptamolybdate is easily prepared by dissolving molybdenum trioxide in an excess of aqueous ammonia and evaporating the solution at room temperature.
CAS No. 12054-85-2. Molecular Formula, (NH4)6Mo7O24.4H2O, Molecular Weight, 1235.86. H.S. Code, 2841.7090
