Amino Ethoxy Vinyl Glycine CAS Number: 55720-26-8


Personal Protective Equipment (PPE):

TECHNICAL SPECIFICATON::
Bismuth(III) sulfate, with the chemical formula Bi2(SO4)3, is an inorganic compound, a salt of bismuth metal and sulfuric acid, appearing as a white, hygroscopic solid that decomposes at 465 °C. It is also known as bismuth trisulfate or bismuth sesquisulfate.
Analytical Chemistry:
Pharmaceuticals:
BENEFITS::
Bismuth salts also work like an antacid to treat problems such as indigestion. Bismuth might also speed up blood clotting. People commonly use bismuth for travelers' diarrhea, a digestive tract infection that can lead to ulcers (Helicobacter pylori or H. pylori), and stomach ulcers.
PRECAUTION::
Precautions for safe handling: Avoid contact with skin and eyes.



Chlorine scavengers are substances that react with chlorine or chlorine-generating materials to eliminate or reduce their bleaching activity and corrosion effects, often used in water treatment and other applications to remove chlorine.
TECHNICAL SPECIFICATION::

PRODUCT SPECIFICATION/ PROPERTIES
|
Appearance |
:Liquid |
|
Colour |
:Clear (Custom Dyes may be added) |
|
Odour |
:Slightly bitter or Mild |
|
Specific Gravity |
:1.02-1.10 |
|
pH |
:11-12 (100% Concentration) |
|
Stability |
:Stable |
|
Boiling Point |
:100°C |
|
Freezing Point |
:-5 °C |
|
Flash Point |
:Not applicable |
|
Vapour Pressure |
:Not Applicable |
|
Stability |
:Stable |
EQUIPMENT
RXSOL ORG LOCO 20™Locomotive Cleaner is best applied to a locomotive with a low-to-moderate pressure foaming mechanism. Line pressure should be in the range recommended by the foam equipment manufacturer. This is usually in the range of city water pressure, or 30-100psig. Therefore, city water pressure can be used as the motive force to both drive water of dilution through an in-line mixer and suck Locomotive Cleaner into the line in advance of the foamer. Alternatively, Locomotive Cleaner can be applied directly to the locomotive at full strength with nearly any type of low-pressure sprayer. Locomotive Cleaner should be rinsed off using a high pressure sprayer/washer that delivers at least 2000psig at the nozzle discharge. Fan spray-type or wedge-type nozzles can be used for both foam-on and rinse-off operations. Material of construction for pumps, lines, valves, etc. should be mild steel, stainless steel, cast iron or plastic/polymeric.
PROTECTIVE EQUIPMENT
Although RXSOL ORG LOCO 20™ Locomotive Cleaner is non-hazardous and has low levels of aggressiveness to human tissue, it is always wise to prevent cleaners from contacting skin and eye tissue for prolonged or repeated periods of time. Skin sensitization is always possible over time. Use of water resistant gloves, boots and clothing and goggles or safety glasses plus a face shield and hard hat are recommended, especially for large jobs such as locomotive cleaning.
FUTURE :
BENEFIT
ADVANTAGE :



| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash Point |
63°C (Closed Cup) |
Stability : Very stable understandard,.normalconditions |
| Compatibility | ||
|
Metal
Plastic |
No known effect |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No | Size (in kgs./lts.) |
|
RXSOL-16-1077-025 |
7/25 Lts |

RXSOL-16-1077-020 must be used in open or sufficiently ventilated areas. RXSOL-16-1077-020 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1077-020. Never use RXSOL-16-1077-020 on a running generator or motor. RXSOL-16-1077-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
