Your shopping cart is empty.
| Property | Specification |
|---|---|
| Appearance | Clear to pale yellow liquid |
| pH (1% solution) | 4.0 – 5.5 |
| Density @ 25°C | 1.10 – 1.20 g/cm³ |
| Solubility in Water | Completely soluble |
| Storage | Cool, dry, well-ventilated area |
Acidic water causing problems for system. Acid neutralizer help to raise the pH levels.
Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
SLIPcoat supplier in Sohar Muscat Oman, Fujairah Dubai UAE
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
| Physical State | : | Liquid |
| Solubility in Water | : | Insoluble |
| Boiling Point | : | >190°F |
| Flash Point, COC | : | 190°F |
| Total Chlorine/Chloride, wt% | : | 0.00/0.00ppm |
| Appearance and Odor | : | Opaque/Chemical |
| Specific Gravity | : | 0.82 |
| VOC Content (ASTM D2369) | : | 58% |
| pH Concentrate | : | NA |
| Total Sulfur, wt% | : |
0.00 |
FEATURES & BENEFITS
VERSATILE:
Corrosion Inhibitor for metal RUST Preventive rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.
Corrosion Inhibitor for metal RUST Prevantive is applied with in-process spray or dip tank application where fluid run-off is collected for reuse, water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom.
Corrosion Inhibitor for metal RUST Prevantive can be applied to wet or dry parts. It neutralizes fingerprint residues and protects ferrous and non-ferrous metals from corrosion.
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES:
| Physical State | : | Liquid |
| Solubility in Water | : | Insoluble |
| Boiling Point | : | >190°F |
| Flash Point, COC | : | 190°F |
| Total Chlorine/Chloride, wt% | : | 0.00/0.00ppm |
| Appearance and Odor | : | Opaque/Chemical |
| Specific Gravity | : | 0.82 |
| VOC Content (ASTM D2369) | : | 58% |
| pH Concentrate | : | NA |
| Total Sulfur, wt% | : |
0.00 |
FEATURES & BENEFITS
VERSATILE:
Corrosion Inhibitor for metal RUST Preventive rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.
Corrosion Inhibitor for metal RUST Prevantive is applied with in-process spray or dip tank application where fluid run-off is collected for reuse, water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom.
Corrosion Inhibitor for metal RUST Prevantive can be applied to wet or dry parts. It neutralizes fingerprint residues and protects ferrous and non-ferrous metals from corrosion.
Some important uses of C6H5COOH are listed below.
Some important uses of C6H5COOH are listed below.
Property Value : Color Clear
| Odour | : | STRONG, PUNGENT |
| Solubility in water | : | COMPLETE |
| Boiling point | : | 97 oC |
| Melting point | : | -15 oC |
| Viscosity | : | |
| Flashpoint | : | 60 oC |
| Vapour pressure | : | 44 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
- A powerful general disinfectant
- A broad spectrum germicide
- Bactericidal and virucidal
- Very economical cost in use
- It has strong effects on IB, NB, FB viruses
- Used for wheel dipping
- Biological preservation
STORAGE:
Store the original container in cool and dry place away from food and feeding stuff.
PACKING : 25 , 50 & 210 Ltrs
PRECAUTIONS : Wear suitable protective clothes during application of Formalin
- Keep away from heat and open flame
- Don’t discard the product residual or its empty containers in water bodies
- Keep away from the reach of children
