Your shopping cart is empty.
Product Code: RXSOL-22-1388-025
Iron Ore Red Dust Cleaner Usage Directions
Directions for Use
In general Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate.
And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.
Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.
Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.
Safety and Environment Safety Iron Ore Red Dust Cleaner is classified as a skin irritant in its concentrate form and is classified as nonhazardous for transport according to the Australian Dangerous Goods Code. This “non-DG” classification also means less regulated storage of Iron Ore Red Dust Cleaner containers on construction sites and industrial warehouses. Whilst Iron Ore Red Dust Cleaner displays a very low hazard profile for the user in terms of its effect on skin, eyes and respiratory system it is recommended to always wear protective gear including but not limited to chemical proof coveralls, goggles, gloves and rubber boots to minimize exposure to concrete residues and prolonged contact with Iron Ore Red Dust Cleaner
Biodegradation and Aquatic Safety Iron Ore Red Dust Cleaner is readily biodegradable, phosphate free and does not contribute to the eutrophication of waterways.
Waste Water Systems Red Dirt Buster has very low COD and BOD levels making it an excellent choice for use where wastewater processing systems are used. It is, however, recommended that pH readings be taken to ensure that wastewater pH readings comply with board recommendations
Product Code: RXSOL-33-3339-025
Product Property :
| Form | Liquid |
| Colour | Amber |
| Odour | Non |
| Specific Gravity | 1.10 - 1.15 |
| Flash Point | None |
| Freezing Point | < – 4oC |
| pH | 4.5 - 7.00 |
| Solubility in Water | Complete Soluble |
Product Code: RXSOL-61-6392-050
Product Description
Molecular Formula: ZnSO4 · 7H2O
Molecular Weight: 287.5
CAS Number: 7446-20-0
Melting Point: 100 °C
|
Test |
Specification | Result |
|
Appearance (Color) |
White | White |
|
Appearance (Form) |
Crystals or Crystals with Chunks | Crystals |
|
Complexometric EDTA |
99.0 - 103.0 % | 99.2 % |
|
X-Ray Diffraction |
Conforms to Structure | Conforms |
|
Insoluble Matter c = 10%, Water |
_< 0.01 % | < 0.01 % |
| Calcium (Ca) | _< 0.005 % | < 0.001 % |
| Chloride (Cl) | _< 5 ppm | < 5 ppm |
| Iron (Fe) | _< 0.001 % | < 0.001 % |
| Potassium (K) | _< 0.01 % | < 0.01 % |
| Magnesium (Mg) | _< 0.005 % | < 0.001 % |
| Sodium (Na) | _< 0.05 % | < 0.01 % |
| Ammonia (NH4) | _< 0.001 % | < 0.001 % |
| Nitrate (NO3) | _< 0.002 % | < 0.002 % |
| Lead (Pb) | < 0.003 % | < 0.001 % |
| Manganese (Mn) | < 3 ppm | < 1 ppm |
|
pH c = 5%; Water at 25°C |
4.4 - 6.0 | 4.7 |
| Meets ACS Requirements | Current ACS Specification | Conforms |
Product Code: RXSOL-61-6392-025
Product Description
Molecular Formula: ZnSO4 · 7H2O
Molecular Weight: 287.5
CAS Number: 7446-20-0
Melting Point: 100 °C
|
Test |
Specification | Result |
|
Appearance (Color) |
White | White |
|
Appearance (Form) |
Crystals or Crystals with Chunks | Crystals |
|
Complexometric EDTA |
99.0 - 103.0 % | 99.2 % |
|
X-Ray Diffraction |
Conforms to Structure | Conforms |
|
Insoluble Matter c = 10%, Water |
_< 0.01 % | < 0.01 % |
| Calcium (Ca) | _< 0.005 % | < 0.001 % |
| Chloride (Cl) | _< 5 ppm | < 5 ppm |
| Iron (Fe) | _< 0.001 % | < 0.001 % |
| Potassium (K) | _< 0.01 % | < 0.01 % |
| Magnesium (Mg) | _< 0.005 % | < 0.001 % |
| Sodium (Na) | _< 0.05 % | < 0.01 % |
| Ammonia (NH4) | _< 0.001 % | < 0.001 % |
| Nitrate (NO3) | _< 0.002 % | < 0.002 % |
| Lead (Pb) | < 0.003 % | < 0.001 % |
| Manganese (Mn) | < 3 ppm | < 1 ppm |
|
pH c = 5%; Water at 25°C |
4.4 - 6.0 | 4.7 |
| Meets ACS Requirements | Current ACS Specification | Conforms |
Product Code: RXSOL-22-2088-025
This is a well balanced blend of corrosion inhibitors , and surface active highly emulsified acidic materials product for the cleaning of aluminium, copper and removal of rust stains on paint work.
Do not eat, drink or smoke while handling it; wash carefully with soap and water before meals and after work shift as shower is recommended.
R 34 : Causes burns.
S 26 : On contact with eyes,Wash eye ball immediately with plenty of water and seek medical advice.
Product Code: RXSOL-14-1211-250
| Product Name | : | Denaturerd Ethanol |
| CAS number | : | 64-17-5 |
| UN number | : | 1170 |
| Formula | : | CH3CH2OH |
| Odour | : | VINOUS |
| Solubility in water | : | Complete |
| Density | : | 0.789 at 20 oC |
| Boiling point | : | 78 oC |
| Melting point | : | -117 oC |
| Viscosity | : | 1.2 cp at 20 oC |
| Flashpoint | : | 12oC |
| Explosive limits | : | 3.3 – 19 Vol% |
| Vapour pressure | : | 58 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 1000 ppm 1900 mg/m3 |
| Pollution category 1994 | : | III |
Chemical Name, Ethyl Alcohol. Chemical Classification, Monohydric aliphatic alcohol. Synonyms. Ethanol, grain alcohol; fermentation alcohol; alcohol; methylcarbinol; absolute alcohol, anhydrous alcohol; ethyl hydrate; ethyl hydroxide; molasses alcohol; spirit etc
Product Code: RXSOL-33-3329-025
| Appearance | Clear Liquid |
| Color | Light Yellow to amber liquid |
| pH | 2.0 - 5.0 |
| Specific Gravity | 1.20 - 1.30 |
| Odour | Slight |
| Boiling Point | 70 °C |
| Flash Point | 182 °C |
Product Code: RXSOL-62-5521-500
Product Code: RXSOL-94-1277-025
Product Code: RXSOL-27-4221-500
Product Code: RXSOL-25-6400-010
Analysis Report
| Test | Specification | Result |
| Appearance | Clear Liquid | Colorless to hazy aqueous solution |
| Odor: | Characteristic. | Chlorine-like |
| Flammability | Non-flammable | |
| Chemical formula | HOCl | HOCL |
| Chloride (Cl),ppm | 150 ppm MAXIMUM | 20 ppm |
| Color, (APHA) | Less than 30 APHA | Less than 30 APHA |
| Iron (Fe), ppm | 10 ppm MAXIMUM | 2 ppm |
| Molar mass | 52.46 g/mol | 52.46 g/mol |
| Density | Variable | 1.201 to 1.265 G/CC |
| pH | 6.0-6.5, friendly to your skin. | |
| Solubility in water | Soluble | Soluble |
| Acidity (pKa) | 7.53 | |
| Boiling Point: | Decomposition temperature | 40°C |
| Conjugate base | Hypochlorite |
| Molecular weight of HOCl | 52.457 g/mol |
| No. of hydrogen bond acceptor | 1 |
| Monoisotopic mass of Hypochlorous Acid | 51.972 g/mol |
| No. of hydrogen bond donor | 1 |
Product Code: RXSOL-15-6410-001
Analysis Report
| Test | Specification | Result |
| Appearance | Clear Liquid | Colorless to hazy aqueous solution |
| Odor: | Characteristic. | Orange Oil |
| Flammability | Non-flammable | |
| Chemical formula | HOCl | Glycerine Based |
| Chloride (Cl),ppm | 150 ppm MAXIMUM | 20 ppm |
| Color, (APHA) | Less than 30 APHA | Less than 30 APHA |
| Iron (Fe), ppm | 10 ppm MAXIMUM | 2 ppm |
| Molar mass | 52.46 g/mol | 52.46 g/mol |
| Density | Variable | 1.01 G/CC |
| pH | 6.0-6.5, friendly to your skin. | |
| Solubility in water | Soluble | Soluble |
| Acidity (pKa) | 7.53 | |
| Boiling Point: | 100°C | |
| Conjugate base | Hypochlorite |
| Molecular weight of HOCl | 52.457 g/mol |
| No. of hydrogen bond acceptor | 1 |
| Monoisotopic mass of Hypochlorous Acid | 51.972 g/mol |
| No. of hydrogen bond donor | 1 |
• Tested and found instantly kills 99.99% of common germs, viruses, and bacteria that may cause disease.
• HOCI will instantly oxidize and destroy the enzymes on the cell membrane of germs, bacteria and viruses. This causes structural changes to the germs, bacteria and viruses, killing them within seconds.
