Your shopping cart is empty.
Product Code: RXSOL-50-5006-020
Sampling And Testing
A sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Follow the Rxsol Hardness Test Kit instructions and fill the Boiler Water Log Form according to result results. It is important that regular testing is carried out to ensure levels of treatment are correct.
Physical Properties :
Appearance :White powder
Corrosive action : non
pH 1% solution : 8,8
Flash point : none
A precipitant designed to elimate scale deposits and lower the hardness of water in boilers with working pressure up to 60 bars.
It is used in conjunction with alkaline liquid to prevent calcium scale deposits. Both products are used in our standard boiler water treatment programs for low-pressure boiler systems (0-32 bar) and medium-pressure steam propulsion vessels (32-60 bar).
Product Code: RXSOL-50-5001-020
Product Code: RXSOL-50-5003-020
|
Appearance |
LIQUID |
|
Color |
AMBER |
|
AMBER |
9 |
|
Density |
1.2 |
Product Code: RXSOL-60-1201-500
Toluene is toxic if swallowed or inhaled. It is also harmful in contact with the skin. Toluene is very flammable, so presents a significant fire risk. There is some evidence that repeated exposure to toluene may cause reproductive harm.Toluene should be stored in a "non-chlorinated waste" container for subsequent disposal.Safety glasses. If gloves are required, polyvinyl alcohol is recommended.
Standard Packing :
4x1 gallon Fluorinated Poly,
4x4 liter Amber Glass,
5 gallon Metal w/Rieke Spout,
55 gallon New Metal Drum
Wear safety glasses. The working area must be well ventilated to prevent the build-up of toluene vapour. Make sure that any sources of ignition, such as Bunsen burners, hot plates and hot air guns, are removed before you start work.
Eye contact: Immediately flush the eye with plenty of water. Continue for at least ten minutes and call for medical help. Skin contact: Wash off with soap and water. Remove any contaminated clothing. If the skin reddens or appears damaged, call for medical aid. Note that clothes soaked in toluene will be very flammable, so should be removed in an area in which there is no risk that they might catch fire. If swallowed: Call for immediate medical help.
Product Code: RXSOL-16-3009-025
Product Properties:-
|
Appearance |
Yellowis liquid |
|
|
pH |
11 .0 - 12.0 |
|
|
Density |
In g/cm3 at 15°C: 1.02 |
|
|
Flash Point |
(PMCC)°C:: None |
|
|
Compatibility |
|
|
|
Metal |
No known effect |
|
|
Rubber |
No known effect |
|
|
PACKAGING |
Order No.: |
Size |
|
|
Rxsol RT 2002 A |
Non-returnable boxes of |
|
|
|
25 litre plastic jar. |
Product Code: RXSOL-10-1002-020
The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.
Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.
Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.
Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.
Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.
The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.
Regular oil changes using high-quality marine lubricants help prevent friction and wear.
Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.
Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.
Ensure coolant levels are checked regularly to prevent overheating.
Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.
Regularly clean fuel injectors and filters to maintain smooth operation.
The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.
RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.
Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.
Apply corrosion inhibitors and protective coatings to extend the life of engine room components.
Product Code: RXSOL-16-1075-025
|
APPEARANCE |
Pale yellow liquid |
|
DENSITY, in g/cm3 at 15°C |
1.0 |
|
FLASH POINT, (PMCC) in °C |
Above 61 |
|
pH, in conc. |
N/A |
|
COMPATIBILITY |
|
|
Metal |
No known effect |
|
Rubber |
May swell |
|
Synthetic rubber |
May swell |
|
SAFE CARBON CLEANING
|
KEY FEATURES
|
|
High-performance liquid carbon remover specially formulated to dissolve and remove stubborn carbonized deposits, grease, varnish, and oil from a wide range of engine and mechanical components. It penetrates deeply into heavy buildup on pistons, valves, rings, atomizers, burner tips, coolers, and gearboxes, delivering fast and complete cleaning. Its superior formula makes it the go-to solution for diesel engine overhauls and maintenance cleaning. |
|
Product Code: RXSOL-60-6106-500
Appearance/Form: Liquid
Formula: AgNO3
Molecular Weight: 169.87
MP: 212 °C (414 °F)
BP: 440 °C (824 °F)
Density: 4.35 g/mL
Solubility: Soluble in water
Preventing Silver Nitrate stains on your skin
Here is a neat trick :::
1 - Dissolve 2 teaspoons of common table salt in 1 Cup of warm water.
2 - Place this Salt solution close by where you will be working with Silver Nitrate solutions.
Then, if you spill Silver Nitrate solution on your skin, do this:
1 - Stop what you are doing.
2 - Rub the Salt solution completely onto your skin, where you think the Silver Nitrate spilled.
3 - Rub HARD, get the Salt solution as deeply into your skin as you can. You can use a paper towel.
4 - Work quickly - you have about 10 seconds!
5 - After a minute or so, rinse off the Salt solution in plain tap water. If you do this promptly, the Silver Nitrate will convert to Silver Chloride, and your skin will not darken when you later go out into the sunlight!
Product Code: RXSOL-60-6101-500
| Appearance | Colorless, fuming liquid |
| Odor | Pungent odor of hydrogen chloride |
| Solubility | Infinite in water with slight evolution of heat |
| Density | 1.18 |
| pH | For HCL solutions: 0.1 (1.0 N), 1.1 (0.1 N), 2.02 (0.01 N) |
| % Volatiles by volume @ 21C (70F) | 100 |
| Boiling Point | 53C (127F) Azeotrope (20.2%) boils at 109C (228F) |
| Melting Point | -74C (-101F) |
| Vapor Density (Air=1) | No information found |
| Vapor Pressure (mm Hg) | 190 @ 25C (77F) |
| Evaporation Rate (BuAc=1) | No information found |
Product Code: RXSOL-40-4013-020
Product Code: RXSOL-16-3012-025
Fore and Aft is eco-friendly water soluble Biodegradable cleaner. Due to its Non-caustic base formula makes a product easy to handle by personnel and non-hazardous on the metal surface and its all ingredients are Non-flammable enhancing the property of fore-aft to make storage hassle free.
Due to Non-Hazardous nature of cleaner giving opportunity to use in the food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes.
The engine room is the heart of any vessel, responsible for the propulsion and essential power systems that keep the ship running smoothly. Proper engine room maintenance is critical to ensuring safety, efficiency, and regulatory compliance. At RXMARINE International, we specialize in providing high-quality marine chemicals that enhance maintenance procedures, keeping vessels in top condition.
Prevents Downtime & Costly Repairs: Regular inspections help detect early signs of wear and tear, reducing expensive breakdowns.
Enhances Fuel Efficiency: A well-maintained engine operates efficiently, cutting down fuel consumption and operational costs.
Ensures Crew Safety: Proper maintenance minimizes the risk of hazardous incidents such as fires, leaks, or mechanical failures.
Regulatory Compliance: Compliance with international maritime regulations (IMO, SOLAS) is essential to avoid fines and ensure smooth sailing.
The accumulation of oil, grease, and dirt can lead to overheating and reduced efficiency. Using RXMARINE’s Engine Room Cleaners & Degreasers, you can effectively remove sludge, carbon deposits, and oil residues.
Regular oil changes using high-quality marine lubricants help prevent friction and wear.
Monitoring oil viscosity and contamination is crucial to detect potential engine issues early.
Scale and corrosion in heat exchangers and cooling lines reduce efficiency. Descaling chemicals like RXMARINE’s RXSCALE help prevent blockages and maintain optimal cooling.
Ensure coolant levels are checked regularly to prevent overheating.
Fuel contamination with water, sludge, and microbial growth can affect engine performance. Using fuel additives and biocides prevents clogging and improves combustion efficiency.
Regularly clean fuel injectors and filters to maintain smooth operation.
The bilge area accumulates oil and sludge, which can pose environmental and safety hazards.
RXMARINE’s Oil Spill Dispersants & Bilge Cleaners effectively break down oil and prevent pollution.
Saltwater exposure accelerates corrosion in pipes, tanks, and metal surfaces.
Apply corrosion inhibitors and protective coatings to extend the life of engine room components.
Product Code: RXSOL-20-3017-020
