Your shopping cart is empty.
Product Code: RXSOL-19-3772-026
Choline chloride is Free flowing light tannish brown granule an organic compound that's a quaternary ammonium salt, meaning it's made up of choline cations and chloride anions:
Product Code: RXSOL-97-2042-025
Product Code: RXSOL-97-6605-025
Product Code: RXSOL-60-6562-005
Other Valuable product:
Product Code: RXSOL-67-1461-210
| Product Name | GrindAid 3000 |
| pH | 6-9 |
| Sp. Gravity | 1-1.2 |
Product Code: RXSOL-51-2066-220
| Appearance | Clear to Pale Yellow Liquid |
|
Water content |
4-5% w/w |
| Aqueous Emulsion | Ready dispersible white milky emulsion |
| Specific Gravity at 25°/25°C | 1 |
| Odour | Slight |
| Specific Gravity | <1 |
| Saponifaction Value | 11-15 mg KOH/g |
Low dose levels, typically in the range 0.05 to 0.1 mg/l in the seawater feed stream, depending on feed water quality. Activity is not dependent on temperature. No need to alter dose level if top brine temperature (TBT) changes. Negligible steam volatility and carry over into the distillate.
RXSOL-51-2066-220 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence of salts, resulting in reduced deposits on the plant’s equipment. RXSOL-51-2066-220 help preserves foam control under the severe conditions of a dehydrating unit. These conditions can remove water from other antifoam emulsions, rendering them immediately inactive.
Product Code: RXSOL-19-3356-066
Product Code: RXSOL-15-3335-025
Benefits Ideal for Healthcare, Pharmaceuticals, Agriculture, Veterinary and Food processing
Broad spectrum biocidal activity, Sporicidal
Turberculocidal, Fungicidal and Virucidal
Breaks down in to water vapour & oxygen
Easy to rinse and washes away with water
Simple to spray and mop on surfaces
Non - corrosive and non toxic by products
Product Code: RXSOL-19-3361-214
Product Code: RXSOL-19-3254-010
Product Code: RXSOL-43-4001-030
RX MARINE INTERNATIONAL are continiously working in water treatement sector, And developed many unique product to avoid corrosion and scale depositon in cooling water system. Here I wants to keep our experiment results with you.Corrosion inhibitor for closed cooling systems containing molybdate/phosphonate ( RXSOL-40-4018-025 ). Sodium molybdate has the advantage in that the dosing of lower ppm's of molybdate allow for lower conductivity of the circulating water. Sodium molybdate at levels of 50-100 ppm offer the same levels of corrosion inhibition that sodium nitrite at levels of 800+ ppm. By utilizing lower concentrations of sodium molybdate, conductivity is kept at a minimum and thus galvanic corrosion potentials are decreased.
Before testing of Nitrite level, Here is some point and guideline, what you need to do. : 1 take the following readings; pH, TDS (uS), and nitrite level.and record. 2 add the Chemical your are using. 3. wait for a period of time for the sysem to circulate.
for a period of time.
If the TDS and Nitrite drop you have a leak/ unknown makeup. if the TDS stays stable and the nitrite drops you have a biological problem. Bacteria that convert nitrite to nitrate.
Solution ::: Use DI water in place of general water, And also use. Algaecide to control Bacterial growth inside water system ... http://rxmarine.com/Biocide-
Product Code: RXSOL-19-1910-025
Product Specification:
| Product Number: | P9346 |
| CAS Number: | 108-95-2 |
| MDL: | MFCD00002143 |
| Formula: | C6H6O |
|
Formula Weight: |
94.11 g/mol |
| Storage Temperature: |
2 - 8 °C |
| TEST | SPECIFICATION |
| Identity | Pass |
| Clarity of Solution and Reacti | Pass |
|
Distilling Range Method I |
<182.5 °C |
| Limit of Nonvolatile Residue | < 0.05 % |
| Residual Solvents Meets Requirements Assay | Meets Requirements |
| Recommended Retest Period 4 years | ------------------------- |
| PRODUCT NAME | : | PHENOL |
| CAS number | : | 108-95-2 |
| UN number | : | 1671 |
| Formula | : | C6H5OH |
| Odour | : | DISTINCTIVE |
| Solubility in water | : | APPRECIABLE |
| Density | : | 1.057 at 20 oC |
| Boiling point | : | 182 oC |
| Melting point | : | 42 oC |
| Viscosity | : | 12.7 cp at 18 oC |
| Flashpoint | : | 78 oC |
| Explosive limits | : | 1.3 – 9.5 Vol% |
| Vapour pressure | : | .3 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 5 S ppm 19 S mg/m3 |
| Pollution category 1994 | : | B |
