Isothiazolinone CMIT MIT 14

Size:

Color:

Product Short Description: Isothiazolinone CMIT/MIT 14 is high performance, broad spectrum, antimicrobial agents based on the proven isothiazolone chemistry.
Product Technical Specification:

 

Appearance Light yellow liquid
Active Ingredient 14%
Viscosity 16 cps @ 25°C
pH 2.0-4.0
Specific Gravity (g/ml) at 20°C

1.27-1.33

5-Chloro-2-Methyl-4-Isothiazoline-one

10.1 - 11.3

Magnesium (%) 4.2 - 5.5
2-Methyl-4-Isothiazoline-3-one 3.0 - 4.1

 

Remarks:

CMIT/MIT 14% as chemical biocide algaecide is ideally suited to meet the requirements of an industrial water treatment biocide and excellent Isothiazolinone biocide. Isothiazolinone CMIT/MIT 14% microbicide is not deactivated by suspended organic matter, and is compatible with other water treatment additives, including chlorine. With the recent change of many cooling towers and paper mills to alkaline operating conditions, it is important to use a biocide such as Isothiazolinone CMIT/MIT 14% which remains stable at higher pH values. Isothiazolinone CMIT/MIT 14% is of low toxicity at use levels, easily deactivated and biodegradable.

-Used as sludge stripper
-Used as biocide
-Used in waste water treatment in oilfield
-Cosmetic
-Papermaking
-Pesticide
-Leather
-Detergent

Application Field  / Industry :

  • Adhesive industry
  • Construction industry
  • Gypsum, plaster and mortar
  • Laundry and cleaning agents
  • Lubricant/coolants
  • Paint and coatings industry
  • Paper manufacture
  • Technical suspension/emulsion
  • Textile and leather industry
  • Water treatment 
Images: Alt

Paraffin Wax Emulsion

Size:

Color:

Product Short Description: construction chemicals for protection of Concrete against corrosion and rust
Product Technical Specification:

 

PRODUCT NAME : PARAFFIN WAX emulsion 
CAS number : 8002-74-2
UN number :  
Formula : HOOCCOOH.2H2O
Odour : ODOURLESS
Solubility in water : SOLUBLE
     
Flashpoint : 199  oC
Explosive limits :  
Vapour pressure :  
Skin absorption/irritation : NO
TLV       Country  NL              Year  1995  : ppm    1mg/m3
Pollution category  1994 : III

 

Remarks:

Paraffin wax is mostly found as a white, odorless, tasteless, waxy solid, with a typical melting point between about 46 and 68 °C (115 and 154 °F), and a density of around 900 kg/m3. It is insoluble in water, but soluble in ether, benzene, and certain esters. Paraffin is unaffected by most common chemical reagents but burns readily. Its heat of combustion is 42 MJ/kg.

Paraffin wax is an excellent electrical insulator, with a resistivity of between 1013 and 1017 ohm metre.  This is better than nearly all other materials except some plastics (notably Teflon). It is an effective neutron moderator and was used in James Chadwick's 1932 experiments to identify the neutron.

Paraffin wax is an excellent material for storing heat, with a specific heat capacity of 2.14–2.9 J g−1 K−1 (joules per gram kelvin) and a heat of fusion of 200–220 J g−1.  Paraffin wax phase-change cooling coupled with retractable radiators was used to cool the electronics of the Lunar Roving Vehicle during the manned missions to the Moon in the early 1970s.  Wax expands considerably when it melts and this allows its use in wax element thermostats for industrial, domestic and, particularly, automobile purposes.

Images: Alt

Abamectin 5 Fungicide

Size:

Color:

Product Short Description: Abamectin 5%
Product Technical Specification:
Remarks:
Images: Alt

Fosetyl Aluminum 80 Fungicide

Size:

Color:

Product Short Description: Fosetyl Aluminum 80%
Product Technical Specification:
Remarks:
Images: Alt

Ethoprophos 10 Insecticide

Size:

Color:

Product Short Description: Ethoprophos 10%
Product Technical Specification:
Remarks:
Images: Alt

Diazinon 60 Insecticide

Size:

Color:

Product Short Description: Diazinon 60%
Product Technical Specification:
Remarks:
Images: Alt

Beta Cypermethrin 15 Insecticide

Size:

Color:

Product Short Description: Beta Cypermethrin 1.5%
Product Technical Specification:
Remarks:
Images: Alt

Water Filter Corrosion Preventive

Size:

Color:

Product Short Description: Specially formulated, silica-based product for reducing corrosion normally associated with marine and offshore potable/fresh water storage systems. Use this product into the storage tank will form a protective barrier-type film on internal metal surfaces.
Product Technical Specification:

Appearance: Clear, viscous liquid

Specific Gravity at 25° C (77° F): 1.4

Flash Point (PMCC): None

Freeze Point: 0° C (32° F)

pH: 11.0

Future & Benefit

Features

Benefits

Odorless/tasteless

Recommended for potable/fresh water tanks

Concentrated liquid

Cost effective and Easy to apply

Forms protective silicate film

Protects potable and fresh water tanks against corrosion.Prevents red water conditions

Drinking Water Additives

Safe to use

Remarks:
Images: Alt

Calcium Chloride Powder

Size:

Color:

Product Short Description: The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol. It is an ionic compound.
Product Technical Specification:

Product Specification

Product Number: C4901
CAS Number: 10043-52-4
MDL: MFCD00010903
Formula: CaCl2
Formula Weight: 110.98 g/mol

Test Specifications
Appearance (Color) White
Appearance (Form) Powder
Solubility (Color) Colorless to Very Faint Yellow
Solubility (Turbidity) Clear
10 g + 100 ml, H2O Titration with EDTA  >_ 97.0 %
Magnesium & Alkali Salts <_ 3.0 %
Recommended Retest Period 5 years  
 
Remarks:

Calcium chloride Flake and Pellets supplier and distributor. Both our Calcium Chloride Flakes and our Calcium Chloride Pallets are available in 50 kg  bags and Jumbo Bags.

Anhydrous Specifications 
Product Calcium Chloride 95%+/-1% (Anhydrous)
CAS No. 10043-52-4
Mol.formula CaCl2
Mol.wt 110.98 g/mol
Appearance White lumps/Powder
Assay 99.5 % Min. 
pH 8.5 to 9.5%
Arsenic Nil
Heavy Metals Nil
Packing 40 kgs HDPE bags for Lumps/50 Kgs Bags for powder


Dihydrate Specifications 
Product Calcium Chloride - 75-80% (Dihydrate)
CAS No. 10035-04-8
Mol.formula CaCl2
Mol.wt 147
Appearance White lumps/Powder
Assay 75% Minimum 
pH 8.5 to 9.5%
Arsenic Nil
Heavy Metals Nil
Packing 50 kgs HDPE bags

Images: Alt

Paraffin Inhibitor RXSOL 3085

Size:

Color:

Product Short Description: Paraffin Inhibitor Rx 3085 controlled release additive that slowly desorbs from the proppant pack to provide immediate and long-term protection against paraffin deposition.
Product Technical Specification:
Remarks:
Images: Alt

pH Booster cum Corrosion Inhibitor

Size:

Color:

Product Short Description: RXSOL pH Boosters are liquid alkaline formulation,used as alkalinity source for boiler feed water along with inhibitor corrosion. It is synergized with properties of pH boosting and water conditioning.
Product Technical Specification:

 

Properties Unit Typical Value
Form and Appearance - Clear Colorless Liquid
Odor - Characteristic
pH (neat) pH Alkaline
Solubility - Completely Soluble in Water
Remarks:
Images: Alt

Tri Sodium Phosphate Anhydrous TSP

Size:

Color:

Product Short Description: TRI SODIUM PHOSPHATE TSP Powder ANHYDROUS
Product Technical Specification:

 

Property Description

Specification

Purity, %

99.1 min

Sulphate, %

0.5 max

Insoluble in water, %

0.05 max

P2O5 %

41 min

CO3 %

0.40 max

NaOH %

2.87 max

Arsenic, %

0.005 max

Iron %

0.01 max

Chloride,%

0.7 max

Fluoride, %

0.003 max

Methyl Orange

16.5-19.0

Remarks:
Cas No :- 7758-16-9
Chemical Formula :- Na3po4
Images: Alt
stock-clearance.png