Asphalt Release Agent RXSOL
- Part number
- RXSOL-90-4162-2101
- Category
- Asphalt Release / Products
- Brand
- RXSOL
Overview
Asphalt Release Agent RXSOL is a completely biodegradable lubricant. The non-hazardous, water soluble mixable agent is designed to provide clean rapid and easy separation of bituminous (asphalt) materials from beds of dump trucks and haul trucks. This product is classified as Non Stick Biodegradable Agent for Asphalt
Technical specifications
| Appearance | : | Clear Pale Straw Liquid |
| Odour | : | Glycol Ether Odour |
| pH 1% Soln. | : | 7 |
| Boiling Point | : | > 212F |
| Specific Gravity | : | 0.96 g/ml |
| Viscosity | : | 10 cps |
| Solubility in Water | : | Complete White Emulsion |
| Misc. Physical Data | : |
NA |
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | : Asphalt Release Agent Rx |
| Part Number | : RXSOL-90-4162-2101 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 20871200 -1400 |
| Fax | +91 22 20871500 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EINECS No | Wt.% | Symbol |
| sodium dodecylbenzenesulfonate | 25155-30-0 | -- | >= 10 - < 20 | -- |
| Signal Word | Warning |
| Hazard Statements |
H315 Causes skin irritation.
H319 Causes serious eye irritation.
|
| Precautionary statements - prevention |
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ eye protection/ face protection.
|
| Precautionary statements - response |
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P362 Take off contaminated clothing and wash before reuse
|
| General advice | Do not leave the victim unattended. |
| Eye Contact |
Remove contact lenses.
Protect unharmed eye.
If eye irritation persists, consult a specialist.
|
| swallowed |
Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.Keep respiratory tract clear.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
If symptoms persist, call a physician.
|
| Skin Contact |
If skin irritation persists, call a physician.
In case of contact, immediately flush skin with plenty of water
for at least 15 minutes while removing contaminated clothing
and shoes.
|
| Inhalation |
If breathed in, move person into fresh air.
Remove person to fresh air. If signs/symptoms continue, get
medical attention.
|
|
Most important symptoms
and effects, both acute and
delayedMost important symptoms
and effects, both acute and
delayed
|
Effects are immediate and delayed.
Symptoms may include irritation, redness, pain, and rash.
Causes skin irritation.
Causes serious eye irritation.
Review section 2 of SDS to see all potential hazards.
|
| Notes to Physicians | Treat symptomatically. Symptoms may be delayed. |
| Suitable extinguishing media |
Dry chemical
Carbon dioxide (CO2)
Alcohol-resistant foam
Foam
Water spray
|
| Extinguishing media which must not be used for safety reasons: | High volume water jet. |
|
Hazardous combustion
productsHazardous combustion
products
|
Carbon dioxide (CO2)
Carbon monoxide
Smoke.
|
| Specific extinguishing methods |
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
|
| Special protective equipment for fire-fighters: | Wear self-contained breathing apparatus for firefighting if necessary. |
| Additional information: |
Standard procedure for chemical fires.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
|
| Personal precautions, protective equipment and emergency procedures |
Use personal protective equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
|
| Enviromental Precaution |
Prevent product from entering drains.
Prevent further leakage or spillage if safe to do so.
If the product contaminates rivers and lakes or drains, inform
respective authorities.
|
|
Methods and materials for containment and cleaning up |
Wipe up with absorbent material (e.g. cloth, fleece).
Keep in suitable, closed containers for disposal.
|
| Advice on safe handling | Do not breathe vapours/dust. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Dispose of rinse water in accordance with local and national regulations. |
| Conditions for safe storage | Keep container tightly closed in a dry and well-ventilated place. Electrical installations / working materials must comply with the technological safety standards. |
| Materials to avoid | Oxidizing agents Do not freeze. Do not store near acids. |
| Storage temperature | 5 - 40 °C |
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
| Respiratory protection | No personal respiratory protective equipment normally required. |
| Hand protection Remarks |
Skin should be washed after contact. For prolonged or repeated contact use protective gloves. The suitability for a specific workplace should be discussed with the producers of the protective gloves. The suitability for a specific workplace should be discussed with the producers of the protective gloves. |
| Eye protection | Eye wash bottle with pure water Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems. |
| Skin and body protection | impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. |
| Hygiene measures |
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday. |
| Appearance | viscous, liquid |
| Colour | Blue |
| Odour | mild |
| Odour Threshold | no data available |
| pH | 8-10.5 |
| Melting point/freezing point | No Data Available |
| Boiling point | 100 °C |
| Flash point | does not flash |
| Evaporation rate | 1 |
| Upper explosion limit | not applicable |
| Lower explosion limit | not applicable |
| Vapour pressure | No data available |
| Vapor pressure | No data available |
| Relative vapor density | No data available |
| Density | No data available |
| Water solubility | soluble in cold water, soluble in hot water |
| Partition coefficient: noctanol/water | no data available |
| Auto-ignition temperature | not determined |
| Thermal decomposition | not determined |
| Chemical stability | Stable under normal conditions. |
| Possibility of hazardous reactions | No decomposition if stored and applied as directed. |
| Conditions to avoid | Exposure to moisture. |
| Incompatible materials | Acids |
| Hazardous decomposition products | Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke). Sulphur oxides |
Acute toxicity
Product:
Acute oral toxicity
Acute toxicity estimate : 4,354 mg/kg Method: Calculation method
Components:
sodium dodecylbenzenesulfonate:
Acute oral toxicity : LD50 Oral rat: 438 mg/kg
Skin corrosion/irritation
Product:
Remarks: May cause skin irritation in susceptible persons.
Serious eye damage/eye irritation
Product:
Remarks: May cause irreversible eye damage.
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
sodium dodecylbenzenesulfonate:
STOT - single exposure no data available
STOT - repeated exposure no data available
Aspiration toxicity
no data available
Product:
Remarks: no data available
| Ecotoxicity | no data available |
| Persistence and degradability | no data available |
| Bioaccumulative potential |
Product: Partition coefficient: noctanol/water Remarks: no data available |
| Mobility in soil | No data available |
| Other adverse effects | No data available |
|
Product:Regulation 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). |
|
| Additional ecological information | no data available |
Disposal methods
| Waste from residues |
Dispose of in accordance with local regulations. Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. |
| Contaminated packaging |
Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. |
NOT REGULATED AS DANGEROUS GOODS OR HAZARDOUS MATERIAL
| International regulation |
UNRTDG Not regulated as a dangerous good IATA-DGR Not regulated as a dangerous good IMDG-Code Not regulated as a dangerous good |
| Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code | Not applicable for product as supplied. |
| National Regulations | 49 CFR Not regulated as a dangerous good |
| Special precautions for user | not applicable |
EPCRA - Emergency Planning and Community Right-to-Know Act
CERCLA Reportable Quantity
| Components | CAS-No | Component RQ (lbs) | Calculated product RQ (lbs) |
| sodium dodecylbenzenesulfonate | 25155-30-0 | 1000 |
Calculated RQ exceeds reasonably attainable upper limit.
SARA 304 Extremely Hazardous Substances Reportable Quantity
This material does not contain any components with a section 304 EHS RQ.
SARA 311/312 Hazards
Acute Health Hazard
SARA 302
SARA 302:No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
California Prop 65
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
methanol 67-56-1
The components of this product are reported in the following inventories:
TSCA On TSCA Inventory
DSL All components of this product are on the Canadian DSL.
AICS On the inventory, or in compliance with the inventory
NZIoC Not in compliance with the inventory
PICCS On the inventory, or in compliance with the inventory
IECSC On the inventory, or in compliance with the inventory
Inventory Acronym and Validity Area Legend:
AICS (Australia), DSL (Canada), IECSC (China), REACH (European Union), ENCS (Japan), ISHL (Japan), KECI (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA)
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
