Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Your shopping cart is empty.
Rust convertor RXSOL-18-1011-025 is polymeric reaction based material, After reaction with rusted particle gives inert atmosphere by leaving polymeric pricipitate on metal surface.
| Appearance | Clear Colourless Liquid | |
| Density | g/cm3 at 20°C 1.05 | |
| Solubility | Water soluble | |
| Drying Time | 1-2 HOURS | |
| Coverage | 18-25 Sq. M/ Lts | |
| Packaging | Order No.: RXSOL- 18 - 1011 |
Size (in Ltrs) 25 Ltrs |
Personal Protection:
| Occupational Exposure Limits | This product does not contain any ingredients,which has an established exposure limit. |
| Respiratory Protection | Not normally needed |
| Hand Protection | PVC Acid proof gloves. |
| Eye Protection | Chemicals splash goggles. |
| General Remarks | |
| Materials to Avoids | Acids, Alkalis, Organic materials, Reducing agents & Strong Oxidizing agents |
**Read the Material Safety Data Sheet before using this product**
PROPERTIES
Pet Coke Remover is a concentrated liquid solution containing powerful surface active agents, a corrosion inhibitor and aqueous chemical agents.
Appearance / Color : Clear, light yellow liquid.
Specific gravity : 1.1–1.2 gr/cm3 at 20°C
pH : 11.5–12.5
Pet Coke STAIN removal concept -
Coal and petcoke leaves stain, its removal is important task during hold cleaning operation. Our expert has 2 suggestion for removal of such stain from the surface.
1st one to use RX Tuff heavy-duty alkaline cleaner, which can apply as an emulsion, need time to take effect and are rinsed away with seawater. More than one application will be needed to remove stubborn stains.
2nd one solution is much more effective than 1st one step. Here our expert suggests using New ORG on the spotted area where the residue is tightly deposited on the surface. " New ORG -RXSOL-20-2020-025 " this product is specialized to react with oily residue where any alkaline cleaner fails to emulsify. Uses of New ORG chemicals for stain removal/cleaning principally dissolve and emulsify OIL RESIDUE stain completely which is resulting stain-free surface, Then without flushing with water follow 1st step.
TECHNICAL DATA:
| pH (as is) | 11.5 – 12.0 |
| Density (20°C) | 1.028 g/cc |
| Colour | Fluorescent yellow |
| Fragrance | Lemon scent |
| Biodegradability | Complete |
| Freezing Stability | Stable |
|
Degradability determined in accordance with OECD no. 301D. |
- |
Analysis Report
| Test | Specification | Result |
| Appearance | Clear Liquid | Colorless to hazy aqueous solution |
| Odor: | Characteristic. | Chlorine-like |
| Flammability | Non-flammable | |
| Chemical formula | HOCl | HOCL |
| Chloride (Cl),ppm | 150 ppm MAXIMUM | 20 ppm |
| Color, (APHA) | Less than 30 APHA | Less than 30 APHA |
| Iron (Fe), ppm | 10 ppm MAXIMUM | 2 ppm |
| Molar mass | 52.46 g/mol | 52.46 g/mol |
| Density | Variable | 1.201 to 1.265 G/CC |
| pH | 6.0-6.5, friendly to your skin. | |
| Solubility in water | Soluble | Soluble |
| Acidity (pKa) | 7.53 | |
| Boiling Point: | Decomposition temperature | 40°C |
| Conjugate base | Hypochlorite |
| Molecular weight of HOCl | 52.457 g/mol |
| No. of hydrogen bond acceptor | 1 |
| Monoisotopic mass of Hypochlorous Acid | 51.972 g/mol |
| No. of hydrogen bond donor | 1 |
Physical Properties
| Appearance | : Clear Liquid |
| Colour | : Straw |
| Density | : 0.80 g/ml @ 20 °C. |
| Flash point | : 38°C minimum |
| Coverage Area |
: 20 - 25 m²/litre Approx |
| Appearance | : Clear Syrupy Liquid |
| pH | : 7 - 8.5 |
| Freezing Point (50% Vol) | : -35 ºC to -37 ºC |
| Boiling Point | : 195 ºC - 198ºC |
| Odour | : Characteristic |
| Specific Gravity | : 1.112 - 1.115 |
|
Appearance |
Clear liquid / Low viscous |
|
Density |
In g/cm3 at 15°C: 0.98 |
|
Flash Point |
°C: Above 65 |
|
Compatibility |
|
|
Metal |
No known effect |
|
Rubber |
May swell |
|
Synthetic rubber |
May swell |
Caution: Although RXSOL-16-1005 is non toxic &non irritant avoid skin or eye.Contact. If contact occurs wash with ample quantity of water.
PHYSICAL / CHEMICAL CHARISTICS
20% Concentration 30% concentration
Boiling Point (KOH)@760mm Hg, 'C 104 113
Freezing Point 'C -23 -89 Specific Gravity 1.18 1.29
Density lb/gal @ 15.6'C 9.8 10.75 Solution in H20 % by Weight Completely Soluble
PH 0.01 moles/ liter has pH of 12.0
Appearance and Odor Clear liquid with no distinct odor.
Do not handle this materials without MSDS.
|
Appearance |
Colourless |
|
Odour |
Odourless |
|
pH |
11-12 approx |
| Boiling Point / Boiling Range |
Not determined |
|
Melting Point/Melting Range |
N/A |
| Flash Point | N/A |
| Flammability | Non flammable |
| Autoflammability | N/A |
| Explosive Properties | N/A |
| Oxidising Properties | N/A |
| Vapour Pressure | Not determined |
| Relative Density | 1.18 approx |
| Solubility in water | Miscible |
| Solubility in other solvents | Not determined |
| Partition coefficient and N-octanol/water | ---------- |
| Other Data |
None |
We are marine chemical supplier since 1996.These Marine Chemicals include different sets of products such as Tank Cleaners, Maintenance Chemicals, Cooling Water Treatment Chemicals, Boiler Water Treatment Chemicals, Fuel Additives, etc.
Oman Chemical is leading one Largest Supplier, Manufacture a
Oman Chemical is leading one Largest Supplier, Manufacture a
