RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,096 products across 104 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Test Kit For Water

Cooling Water Test kit RXSOL 309

REAGENT:-NITRITE, CHLORIDE , pH, ALKALINITY
Part number
RXSOL-62-5508-001
Brand
RXSOL
Cooling Water Test kit RXSOL 309

Overview

REAGENT:-NITRITE, CHLORIDE , pH, ALKALINITY

Applications

Procdure:-

NITRITE PROCEDURE for test ( STEP WISE ):

  1. Measure 1 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER , with the help of syringe / pippet and diluted with Distilled Water up to 10 ml.
  2. Add 1-2 drops of  RXSOL TK5 and mix with the stirring rod , to obtain ORANGE / light reddish  colour. 
  3. Add RXSOL TK6  drop by drop , mixing with the stirring rod until  For endpoint ORANGE to BLUE / GREENISH colour just appears / develop. 
     

Each DROPS is equivalent to 50 PPM of NO2

CALCULATION :-50 X Number of DROPS of TK6

CHLORIDE PROCEDURE for test ( STEP WISE ):-

  1. Measure 15 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER
  2. Add 1-2 drops of  RXSOL TK1 and mix with the stirring rod , If  sample turns red / PINK then follows 3rd step otherwise if sample remains colourless proceed to step 4.
  3. Add RXSOL TK2  drop by drop , mixing with the stirring rod until colour just disappears.
  4. Add 3 drops of RXSOL TK3 and mix with stirring rod , the sample will turn YELLOW.
  5. AddRXSOL TK4 carefully by counting drop by drop and mixing throughly until a light reddish / pink / brown colour develop.

RESULT :- Each DROPS is equivalent to 8 PPM of CHLORIDES .

PROCEDURE for TOTAL ALKALINITY:-

Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER

Add 1-2 drops of  RXSOL TK7 and mix with the stirring rod , If  sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) then proceed to STEP- 4.

Add RXSOL TK9  drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 15 ppm of p-Alkalinity , expressed as CaCO3

Add 2-3 drops of RXSOL TK8 and mix with stirring rod , the sample will turn to BLUISH-GREEN .

AddRXSOL TK9 carefully by counting drop by drop and mixing throughly until a light reddish ( salmon ) pink  colour develop.

RESULT:-Each DROPS is equivalent to 25 PPM of Alkalinity

Test Kit and Chemical DEWT, PH-CHLORIDE-NITRITE-HARDNESS,COOLING WATER TEST KIT, Spectrapak 309 Cooling Water Test Kit,JACKET WATER TESTING KIT, WATER TEST KIT SPECTROPACK 309

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name RXSOL-62-5508-001
Product Type Nitrite Test Kit

 Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch Stock Point : Koltkata, Mumbai, Chennai, Visakhapatnam, Kandla - Gandhidham, Fujairah 

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Component: Hazard Class Phrases: Concentration:
Properitory Blend of  salts in Liquid Skin Irritation (Category 2)
Eye Irritation (Category 2)Specific Target Organ
Toxicity, Single Exposure
(Category 3)Xi
H315, H319, H335
R: 36/37/38
> 10% - < 20%

                                                                                                        

  • Non-hazardous product as specified in Directives 67/548/EEC and 1999/45/EC.
  • Non-hazardous product as specified in OSHA Regulation 29 CFR 1910.1200.
  • Non-hazardous product as specified in Canadian Regulation SOR/88-66.
  • Non-hazardous product as specified in Regulation (EC) 1272/2008.
After Inhalation Remove to fresh air.
After Skin Contact: Wash affected area with plenty of water. Remove contaminated clothing
After Eye Contact: Rinse out with plenty of water. If pain persists, summon medical advice
After Swallowing Drink plenty of water, induce vomiting. Obtain medical attention.
General Information: Remove contaminated, soaked clothing immediately and dispose of safely.
Suitable Extinguishing Media Foam, Powder, Dry Sand
Special Risks: Development of hazardous combustion gases or vapors possible in the event of fire. The following may develop in event of fire: Nitrogen Oxides,Sulfur Oxides
Special Protective Equipment: Do not stay in dangerous zone without suitable chemical protection clothing and self-contained breathing apparatus.
Additional Information: Contain escaping vapors with water. Prevent fire-fighting water from entering surface water or groundwater
Personal Precautions: Avoid generation of dusts. Do not inhale dusts
Environmental Precautions: Do not discharge into the drains/surface waters/groundwater
Additional Notes: Take up dry. Clean up affected area and dispose according to local regulation

Handling:

Accessible only for authorized persons.

Storage:

Store at room temperature (+15 to +25 °C). Tightly closed in a dry and well-ventilated place. Keep away from sources of ignition and
heat

Engineering: Maintain general industrial hygiene practice
Personal Protective Equipment: Protective clothing should be selected specifically for the working place, depending on concentration and quantity of the hazardous substances handled.
Respiratory Protection: Required when dusts are generated. Work under hood.
Protective Gloves: Rubber or plastic
Eye Protection: Goggles or face mask
Industrial Hygiene: Change contaminated clothing. Wash hands after working with substance.
Appearance: Liquids
Melting Point: NA (decomposition
pH at 20°C: ~ 3.1 at 11 g/L in water
Thermal Decomp NA
Odor: Odorless
Boiling Point: NA
Explosion Limit NA
Density at 20°C: NA
Solubility: Soluble
Flash Point NA
Conditions to be Avoided: Heating
Hazardous Polymerization: Will not occur.
Further Information: Not available
Hazardous Decomposition Products: In the event of fire: See section 5.
Substances to be Avoided: Acids

Product Toxicity : Quantitative data on the toxicity of this product is not available

Potential Health Effects:

  • Inhalation: Irritations. Other possible symptoms are: coughing, dyspnoea
  • Skin Contact: Slight irritations
  • Eye Contact: Slight irritations.
  • Ingestion: Mucosal irritations
  • Further Data: Further hazardous properties cannot be excluded. The product should be handled with the usual care when dealing with chemicals

Component Toxicity

Acute Toxicity : Not Available
Additional Data: Not Available
Chronic Toxicity: Not Available

Quantitative data on the ecological effect of this product is not available.

Further Data : No ecological problems are to be expected when the product is handled and used with due care and attention

Waste Disposal : Chemical residues are generally classified as special waste and thus covered by local regulations. Contact local authorities or disposal companies for advice. Handle contaminated packaging in the same way as the substance itself

Road/Rail (ADR/RID)
Proper Shipping Name: Mixture of Inorganic, (CERIC (II) SULPHATE SOLUTION)
ADR UN No.: UN3264
ADR Packing Group: II
ADR subrisk: - NA
ADR Flashpoint: - NA

Sea (IMDG)
Proper Shipping Name:Mixture of Inorganic, (CERIC (II) SULPHATE SOLUTION)
IMDG UN No.: UN3264
IMDG Pack Group.: II IMDG EmS: F-A, S-B
IMDG subrisk:  NA
IMDG Flashpoint: NA

Air (ICAO/IATA)
Proper Shipping Name: Mixture of Inorganic, (CERIC (II) SULPHATE SOLUTION)
ICAO Un No.: UN3264
ICAO Packing Group.: II
ICAO subrisk: NA
ICAO Flashpoint: NA

  • Complies with European Regulations (EC) No. 1907/2006 and No. 1272/2008.
  • Complies with European Council Directives 67/548/EEC and 1999/45/EC.
  • Complies with OSHA Regulation 29 CFR 1910.1200.
  • Complies with Canadian Regulation SOR/88-66

Text of phrases under Section 3

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • R: 36/37/38: Irritating to eyes, respiratory system and skin.

Revision Information

Revision Date: 2013-07-11
Supersedes edition of: 2012-06-01
Reason for revision: Regulation (EC) No. 1272/2008
Compliance
Legend NA: Not Applicable
ND: Not Determined

THE INFORMATION CONTAINED HEREIN IS BASED ON THE PRESENT STATE OF OUR KNOWLEDGE. IT CHARACTERIZES THE PRODUCT WITH REGARD TO THE APPROPRIATE SAFETY PRECAUTIONS. IT DOES NOT REPRESENT A GUARANTEE OF THE PROPERTIES OF THE PRODUCT.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Cooling Water Test kit RXSOL 309 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Cooling Water Test kit RXSOL 309 at a competitive price from us. We have ready stock of Cooling Water Test kit RXSOL 309 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches