Corrosion Inhibitor Nitrite - Phosphonate for CLOSED LOOP
- Part number
- RXSOL-40-4013-020
- Category
- Cooling Water Chemical
- Brand
- RXSOL
Overview
It is a high performance nitrite based closed circuit inhibitor with phosphonate with unique formulation with ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate.
Usefull for use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.
Applications
Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4013-020 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces
Dosage and directions
Refer to technical datasheet.
Sodium Nitrite and 1,2,3-Benzotriazole based corrosion inhibitors for closed cooling water system.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-40-4013-020 |
| Product Type | CWT NB Liq Inhibitor CLOSED LOOP-I |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Sodium Nitrite |
30-40 |
7632-00-0 |
231-555-9 |
8, 25, 50 |
T, O,N |
|
Sodium tetraborate 10 aq |
1-5 |
1303-96-4 |
215-540-4 |
62,63 |
Xn |
|
Benzothiazol-2-thiol |
0.1-.02 |
149-30-4 |
2299129 |
34,37 |
O |
| Benzo Triazole | 5-8 | 95-14-7 | 20, 22, 36, 53 | Xn, N |
*See Section 16
|
Odour |
Odourless. |
|
Appearance |
Pale Yellowis to Clear Liquid, soluble in water. |
|
Contact with eyes |
May cause pain. |
|
Contact with skin |
In cases of severe exposure, severe irritation may develop. |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. |
|
Ingestion |
Toxic if swallowed (R25). |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water Contaminated clothing should be laundered before reuse. When in doubt or symptoms persist, seek medical attention |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids. Obtain immediate medical attention. |
|
Ingestion |
Never make an unconscious person vomit or drink fluids. Give water or milk to drink. Induce vomiting (only if patient is conscious). Obtain immediate medical attention |
|
Inhalation |
Inhalation is unlikely to occur. Remove patient to fresh air. When in doubt or symptoms persist, seek medical attention |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) |
- Nitrogen oxides may be formed.
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions.
- Substance evolves toxic fumes, wear self-contained breathing apparatus.
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses |
|
Immediate Actions |
Use appropriate containment to avoid environmental contamination (S57) |
|
Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete |
|
Special Precautions |
Wear protective clothing as per section 8 |
|
Handling |
Wear protective clothing as per section 8. Avoid contact with skin and eyes (S24/25). Eyewash bottles should be available |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49). Protect from heat Protect from frost |
|
Exposure controls |
No special precautions are required for this product |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) |
|
Odour |
Odourless |
|
Appearance |
Pale yellowish to clear Liquid, soluble in water |
|
pH |
8.5 - 9.5 at 100 % concentration |
|
Boiling point |
>100 °C at 760 mm /Hg |
|
Vapour pressure |
not known |
|
Vapour density |
not applicable |
|
Freezing point |
<0 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
1.10 |
- This article is considered stable under normal conditions
- Avoid contact with acid
- Incompatible with acid, Contact with acids liberates toxic gas (R31)
- See Section 5
|
Toxicological information |
No experimental data available |
|
Inhalation |
Not applicable |
|
Contact with skin |
In cases of severe exposure, severe irritation may develop |
|
Contact with eyes |
May cause severe irritation May cause pain |
|
Ingestion |
Toxic if swallowed (R25) |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Ecotoxicity |
This product contains components which are classified in the EU as dangerous for the environment. May cause acute effects in the aquatic environment |
|
Mobility |
Completely soluble in water |
|
Persistence and Biodegradability |
Its main ingredients will either dissolve rapidly and dissociate in water or are readily / inherently biodegradable. |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment. |
|
Classification |
EU Waste class: 06.03 This material and/or its container must be disposed of as hazardous waste |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
|
Classification and labeling |
Contains Benzothiazol-2-thiol. May produce an allergic reaction. Cooling Water Treatment 15 Regulatory information (....) |
|
Risk Phrases |
Toxic if swallowed (R25) |
|
Safety Phrases |
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) This material and its container must be disposed of in a safe way (S35) |
Text of R and S phrase codes used in this safety data sheet:- R25 : Toxic I f swallowed; R43 : May cause sensitisation by skin contact; R50 : Very toxic to aquatic organisms; R50/53: Very toxic to a quatic organisms, may cause long-term adverse effects in the aquatic environment; R62 : Possible risk of I mpaired fertility;R63 : Possible risk of harm to the unborn child; R8 : Contact with combustible material may cause fire.The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safetyr equirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application (s) without seeking advice from manufacturer. This Safety Data Sheet is provided in compliance with The Safety Data Sheets Directive ( 2001/58EC). This Safety Data Sheet is provided in compliance with The Dangerous Preparations Directiv (88/379/EEC). This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive (67/548/EEC)
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Corrosion Inhibitor Nitrite - Phosphonate for CLOSED LOOP manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Corrosion Inhibitor Nitrite - Phosphonate for CLOSED LOOP at a competitive price from us. We have ready stock of Corrosion Inhibitor Nitrite - Phosphonate for CLOSED LOOP in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
