Fire Resistance Hydraulic Fluid Concentrates
- Part number
- RXSOL-35-3764-210
- Category
- Railway Maintenance
- Brand
- RXSOL
Overview
RXSOL-35-3764-210 is a field proven, dilutable, waterbased hydraulic fluid specifically formulated for use in high-pressure open / vent to sea Blow Out Preventer (BOP) control systems. The fluid prevents valves from sticking even after long static periods and improves system life under slow moving high load conditions. RXSOL-16-3764-210 is capable of use at 1% dilution in fresh potable water (hardness ≤125ppm) and standard
Technical specifications
| Typical Physical Properties | RXSOL-16-3764-210 |
RXSOL-16-3764-210 No Dye
|
| Appearance | Clear Dark Green Mobile Fluid | Clear Amber Fluid |
| Specific Gravity @15.6°C | 1.063 | 1.063 |
| pH (neat) | 10.0 | 10.0 |
| pH @ 2% | 9.4 | 9.4 |
| Pour Point | -40°C (-40°F) | -40°C (-40°F) |
| Kinematic Viscosity (cSt)-20°C (-4°F) | 740 | 740 |
| 0°C (32°F) | 82 | 82 |
| 20°C (68°F) | 20 | 20 |
| 40°C (104°F) | 7 | 7 |
Applications
RXSOL-35-3764-210 meets acceptance requirements of all equipment manufactures (RXSOL) and is a preferred fluid.
Control of water content :After evaporation De-ionized Water should be used for any additions. During applicationa and evaporation water content easily can be evaporated. Which can be controlloed by checking viscosity of the fluid or its density or any other means by using Karl Fisher method.
Water content should be controlled within 35% to 45% by weight.
Dosage and directions
* High dilution ratio (100:1)
In order to reduce water evaporation, system should not be used above 65 °C. The recommended maximum operating temperature is 50 °C. To maintain fire-resistance it is important to monitor the water content of the fluid and replenish if necessary when operating at elevated bulk fluid temperatures.
Environmental Information
RXSOL maintains worldwide environment and can offer RXSOL-16-3764-210 suitable for use in every Exploration and Production region around the world. The current environmental status of RXSOL-16-3764-210 in your area can be obtained from our environmental specialists.
Storage
RXSOL-16-3764-210 should be stored in dry conditions, ideally out of direct sunlight. Normal storage temperature range is 5 to 40°C.
Material Compatibility
RXSOL-16-3764-210 Series contain performance additives which ensure high levels of compatibility with materials typically used in Blow out Preventer (BOP) control systems. Extensive material compatibility tests have been performed with RXSOL-16-3764-210 Series.
Characteristics and notes
Key Benefits
High dilution ratio (100:1)
High-performance ferrrous and non-ferrous corrosion protection
Excellent extreme pressure and anit-wear lubrication properties
High resistance to microbial contamination n Good mixed fluid stability with fresh water and seawater ingress (10%)
Free Fluid Monitoring programme ensures long service life
No dye formula meets worldwide environmental acceptance criteria
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-35-3764-210 |
| Product Type | Fire Resistance Hydraulic Fluid Concentrates |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Vizag, Kolkata, Fujairah, Muscat, Nairobi
| Phone | +91 22 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
|
Chemica Name |
Composition |
|
Ethylene Glycol ( 107-21-1 ) |
Confidential |
| Distilled Water | Confedential |
|
Tall Oil amide |
Confidential |
|
Sodium N-lauroylsarcosinate |
Confidential |
See Section 16
|
Odour |
Mild amine |
|
Appearance |
Amber |
|
Contact with eyes |
May cause discomfort and/or stinging |
|
Contact with skin |
May cause itching on prolonged contact |
|
Ingestion |
May cause nausea and/or vomiting. Ingestion of 100ml of ethylene glycol has been proved to be fatal. |
|
Contact with skin |
Wash with soap and water. Launder contaminated clothing before re-use. If irritation occurs seek medical |
|
Contact with eyes |
Rinse the eye with fresh water for at least 15 minutes. If discomfort persists seek medical attention |
|
Inhalation |
In case of symptoms refer for medical treatment. Remove to fresh air. |
Suitable extinguishing agents:
Water spray, carbon dioxide, dry powder or foam.
Special hazards caused by the substance, its products of combustion or resulting gases:
Decomposition products include oxides of carbon
Protective equipment:
Self-contained breathing apparatus and full protective clothing required.
|
Personal Precautions |
Gloves and eye protection should be worn when handling the product |
|
Environmental Precautions |
Prevent the spillage entering drains and watercourses |
|
Clean Up Actions |
Small spillages may be flushed away with a large volume of water. Large spillages should be absorbed using sand, earth or other absorbent material. Place all absorbed waste into suitable containers for subsequent disposal by a licensed contractor. |
|
Handling |
Gloves and eye protection should be worn when handling the product |
|
Storage |
Store away from foodstuffs and out of direct sunlight. |
Personal protective equipment:
General protective and hygienic measures:
Adhere to good laboratory practice (GLP).
Wash hands before breaks and at the end of work.
Protection of hands:
Protective gloves should be worn.
Material of gloves:
We recommend latex, neoprene, nitrile or natural rubber.
Penetration time of glove material:
Penetration time > 8 hours.
Eye protection:
Safety glasses should be worn. Goggles or a face shield are recommended where there is a risk of accidental splashing.
Body protection:
Overalls should be worn when handling the product.
|
Odour |
Mild amine |
|
Appearance |
amber |
|
pH |
9.8 at 100% |
|
Boiling point |
100°C |
|
Vapour pressure |
2.33 KN.m-2 |
Stability:
Stable.
Materials to be avoided:
None known
Hazardous reactions:
None known.
Hazardous decomposition products:
None known.
|
Toxicological information |
No experimental data available Inhalation. |
|
Contact with skin |
May cause itching on prolonged contact |
|
Contact with eyes |
May cause discomfort and/or stinging |
|
Ingestion |
May cause nausea and/or vomiting. Ingestion of 100ml of ethylene glycol has been proved to be fatal. |
|
Ecotoxicity |
Product is biodegradable and does not bioaccumulate. |
|
Aquatic toxicity: |
This product is of low toxicity. |
Product:
The product should be disposed of as hazardous waste, in accordance with local regulations.
Packaging:
Contaminated packaging must be disposed of in the same matter as the product.
Non-contaminated packaging may be recycled. Contact you local service providers for more information.
Land transport ADR/RID (cross border):
Not regulated.
Maritime transport IMDG:
Not regulated.
Air transport ICAO/IATA Class:
Not regulated.
Labelling according to EC guidelines:
The product has been labelled in accordance with EC directives
Code letter and hazard designation of product:
Xn - Harmful
Risk phrases:
R22 – Harmful if swallowed
R36/38 – Irritating to skin and eyes
Safety phrases:
S2 – Keep out of reach of children
S37/39 – Wear suitable gloves and eye/face protection
Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable..
Availability
Fire Resistance Hydraulic Fluid Concentrates manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Fire Resistance Hydraulic Fluid Concentrates at a competitive price from us. We have ready stock of Fire Resistance Hydraulic Fluid Concentrates in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
