Goggle
- Part number
- RXSOL-64-2624-001
- Category
- Safety Item
- Brand
- RXSOL
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
http://www.ostrem.com/msds/English/S747%20MSDS.pdf
| Product Name | RXSOL-51-6004-025 |
| Product Type | No. 38 Boiler Compound |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | %W/W | CAS number |
| Sodium hydroxide (50%) | 3-7 | 1310-73-2 |
| Sodium molybdate | 5-10 | 7631-95-0 |
| Sodium nitrite | 5-10 | 7632-00-0 |
| tetrasodium salt of ethylene diamine tetraacetic acid (EDTA) | 1-5 | 64-02-8 |
Corrosive liquid. Causes burns. Harmful if swallowed.
|
Inhalation |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
|
Ingestion |
Induce vomiting only on the direct advice of a poison control centre. Drink 1-2 glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. |
|
Eye contact |
Flush with plenty of water for at least 15 minutes. Get medical attention. |
|
Skin contact |
Remove contaminated clothing and flush with plenty of water. |
| Flash point (test method) | Not applicable |
| Flammable limits (%) | Non-flammable |
| Lower | Not applicable |
| Upper | Not applicable |
| Fire extinguishing substances | Use extinguishing media appropriate for surrounding fire. |
| Autoignition temperatures | Not applicable |
| Hazardous combustion products | May liberate carbon monoxide carbon dioxide and oxides of sodium |
| Explosion data | |
| Sensitivity to mechanical impact | Not applicable |
| Sensitivity to static discharge | Not applicable |
| Special firefighting procedures | As for surrounding fire. Fire fighters should wear full protective clothing and self contained breathing equipment. |
|
Personal precautions |
Wear appropriate protective equipment. |
|
Environmental precautions |
Prevent from entering sewers, waterways or low areas. |
|
Methods for cleaning up |
Isolate hazard area and restrict access. Small spills: soak up with inert absorbent material and scoop into containers. Large spills: prevent contamination of waterways. Dike and pump into suitable containers. Clean up residual with absorbent material, place in appropriate container and flush with water. |
|
Handling |
Do not ingest. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. |
| Storage | Keep out of reach of children. Keep container tightly closed. Store in a cool, dry area. |
|
Engineering controls |
Provide exhaust ventilation to keep airborne levels below recommended exposure limits. |
| Respiratory protection |
If exposure exceeds occupational exposure limits, use an appropriate |
| Eye protection |
Chemical goggles. Wear a face shield if splashing hazards exists. |
| Other protection |
Wear protective clothing as necessary to prevent skin contact. |
Exposure limits:
| INGREDIENT | ACGIH | OSHA | Other |
| Sodium hydroxide (50% Sol.) | 2 mg/m3 Ceil | Not available | |
| Sodium molybdate | TLV-TWA 0.5 mg/m3 | ||
| Sodium nitrite | Not available | ||
| tetrasodium salt of ethylene diamine tetraacetic acid (EDTA) | Not available |
| Physical state | Liquid |
| Solubility in water | Complete |
| Boiling point | Not available |
| Vapour pressure | Not available |
| Vapour density | Not available |
| Evaporation rate | Not available |
| Freezing point | Not available |
| Odour threshold | Not available |
| Sp. Gravity | 1.154 |
| pH | 13.5 - 14 |
| Appearance & odour | clear, pale liquid |
|
STABILITY |
Stable |
|
Conditions of instability |
Not available |
|
Incompatibility |
( ) Water (X) Oxidizers (X) Acid ( ) Base ( ) Other |
|
Conditions of reactivity |
Reacts with acids and metals |
|
Hazardous decomposition products |
Nitrogen compounds, nitrogen oxides and carbon oxides |
| POTENTIAL ACUTE HEALTH EFFECTS | |
| Inhalation | Corrosive to respiratory system. |
| Ingestion | Harmful if swallowed. Causes burns to mouth, throat and stomach. May cause methemoglobinemia. |
| Eye contact | Corrosive to eyes. Causes severe burns. |
| Skin contact | Corrosive to skin. Causes severe burns. |
| Skin absorption | Not applicable |
| POTENTIAL CHRONIC HEALTH EFFECTS | |
| Inhalation | Repeat or prolonged exposure may cause damage to lungs. |
| Ingestion | Not available |
| Eye contact | Not available |
| Skin contact | Not applicable |
| Skin absorption | Not applicable |
| Irritancy of product | See WHMIS criteria |
| Sensitization of product | Not available |
| Carcinogenicity: | |
| IARC (1, 2A or 2B) | No known significant effects. |
| ACGIH: (A1, A2 or A3) | No known significant effects. |
| Reproductive toxicity | No known significant effects. |
| Teratogenicity | No known significant effects. |
| Mutagenicity | No known significant effects. |
| Synergistic product | Not available |
|
HAZARDOUS INGREDIENTS |
CAS NO |
TOXICITY DATA |
| Sodium hydroxide (50%) | 1310-73-2 | LD50 oral (rabbit) 365 mg/kg |
| Sodium molybdate | 7631-95-0 | LD 50 Oral (rat) 4000 mg/kg |
| Sodium nitrite | 7632-00-0 |
LD50 Oral (rat) 85 mg/kg LC50 Inhalation (rat) 515 ppm |
| tetrasodium salt of ethylene diamine tetraacetic acid (EDTA) | 64-02-8 |
LD50 Oral (rat) >2000 mg/kg LD50 Dermal (rabbit) 1350 mg/kg |
| Ecotoxicological information | Not available |
| Other information |
|
Waste disposal |
Disposal of all waste must be done according to local, provincial and federal regulations. |
|
TDG classification |
Sodium hydroxide, solution; Class 8; UN 1824; PG II |
|
WHMIS |
E | Corrosive material |
| D2B | Other toxic effects |
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR.
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
-----------------------------------------------------------------------------------------------------------------------------
http://www.ostrem.com/msds/English/S750%20MSDS.pdf
| Product Name | RXSOL-51-6004-025 |
| Product Type | No. 110 Descaler |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | %W/W | CAS number |
| lactic acid (88%) | 7-13 | 79-33-4 |
| hydrochloric acid | 15-40 | 7647-01-0 |
Corrosive liquid. Causes burns. Harmful if swallowed.
|
Inhalation |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
|
Ingestion |
Induce vomiting only on the direct advice of a poison control centre. Drink 1-2 glasses of water. Never give anything by mouth to an unconscious person. Get medical attention. |
|
Eye contact |
Flush with plenty of water for at least 15 minutes. Get medical attention. |
|
Skin contact |
Remove contaminated clothing and flush with plenty of water. |
| Flash point (test method) | Not applicable |
| Flammable limits (%) | Non-flammable |
| Lower | Not applicable |
| Upper | Not applicable |
| Fire extinguishing substances | Use extinguishing media appropriate for surrounding fire. |
| Autoignition temperatures | Not applicable |
| Hazardous combustion products | May liberate carbon monoxide carbon dioxide and oxides of sodium |
| Explosion data | |
| Sensitivity to mechanical impact | Not applicable |
| Sensitivity to static discharge | Not applicable |
| Special firefighting procedures | As for surrounding fire. Fire fighters should wear full protective clothing and self contained breathing equipment. |
|
Personal precautions |
Wear appropriate protective equipment. |
|
Environmental precautions |
Prevent from entering sewers, waterways or low areas. |
|
Methods for cleaning up |
Isolate hazard area and restrict access. Small spills: soak up with inert absorbent material and scoop into containers. Large spills: prevent contamination of waterways. Dike and pump into suitable containers. Clean up residual with absorbent material, place in appropriate container and flush with water. |
|
Handling |
Do not ingest. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. |
| Storage | Keep out of reach of children. Keep container tightly closed. Store in a cool, dry area. |
|
Engineering controls |
Provide exhaust ventilation to keep airborne levels below recommended exposure limits. |
| Respiratory protection |
If exposure exceeds occupational exposure limits, use an appropriate |
| Eye protection |
Chemical goggles. Wear a face shield if splashing hazards exists. |
| Other protection |
Wear protective clothing as necessary to prevent skin contact. |
Exposure limits:
| INGREDIENT | ACGIH | OSHA | Other |
| lactic acid (88%) | Not available | ||
| oxalic acid | TLV - 1 mg/m | ||
| hydrochloric acid | TLV - 5 ppm |
| Physical state | Liquid |
| Solubility in water | 100% |
| Boiling point | Not available |
| Vapour pressure | Not available |
| Vapour density | Not available |
| Evaporation rate | Not available |
| Freezing point | Not available |
| Odour threshold | Not available |
| Sp. Gravity | 1.109 |
| pH | <1 |
| Appearance & odour | clear yellow liquid pungent odour |
|
STABILITY |
Stable |
|
Conditions of instability |
Not available |
|
Incompatibility |
( ) Water (X) Oxidizers ( ) Acid (X) Base ( ) Other |
|
Conditions of reactivity |
Reacts with metals |
|
Hazardous decomposition products |
Not available |
| POTENTIAL ACUTE HEALTH EFFECTS | |
| Inhalation | Corrosive to respiratory system. |
| Ingestion | Harmful if swallowed. Causes burns to mouth, throat and stomach. |
| Eye contact | Corrosive to eyes. Causes severe burns. |
| Skin contact | Corrosive to skin. Causes severe burns. |
| Skin absorption | Not applicable |
| POTENTIAL CHRONIC HEALTH EFFECTS | |
| Inhalation | Repeat or prolonged exposure may cause damage to lungs. |
| Ingestion | Not available |
| Eye contact | Not available |
| Skin contact | Not applicable |
| Skin absorption | Not applicable |
| Irritancy of product | See WHMIS criteria |
| Sensitization of product | Not available |
| Carcinogenicity: | |
| IARC (1, 2A or 2B) | No known significant effects. |
| ACGIH: (A1, A2 or A3) | No known significant effects. |
| Reproductive toxicity | No known significant effects. |
| Teratogenicity | No known significant effects. |
| Mutagenicity | No known significant effects. |
| Synergistic product | Not available |
|
HAZARDOUS INGREDIENTS |
CAS NO |
TOXICITY DATA |
| lactic acid (88%) | 79-33-4 |
LD50 Oral (rabbit) 3730 mg/kg LD50 Dermal (rabbit) 7940 mg/kg |
| hydrochloric acid | 7647-01-0 |
LD50 Inhalation (rat) 3124 ppm/hour LD50 Oral (rabbit) 900 mg/kg |
| Ecotoxicological information | Not available |
| Other information |
|
Waste disposal |
Disposal of all waste must be done according to local, provincial and federal regulations. |
|
TDG classification |
Corrosive Liquid, N.O.S.(hydrochloric acid,lactic acid); 8;UN 1760,PG II |
|
WHMIS |
E | Corrosive material |
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR.
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
-----------------------------------------------------------------------------------------------------------------------------http://www.ostrem.com/msds/English/S752%20MSDS.pdf
| Product Name | RXSOL-51-6004-025 |
| Product Type | Descaler 140 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENT | %W/W | CAS number |
| Sulphamic Acid | 60-100 | 5329-14-6 |
Corrosive powder. Causes burns to skin, eyes, nose, throat and lungs.
|
Inhalation |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
|
Ingestion |
Induce vomiting only on the direct advice of a poison control centre. Get medical attention. |
|
Eye contact |
Flush with plenty of water for at least 15 minutes. Get medical attention. |
|
Skin contact |
Remove contaminated clothing and flush with plenty of water. |
| Flash point (test method) | Not applicable |
| Flammable limits (%) | Non-flammable |
| Lower | Not applicable |
| Upper | Not applicable |
| Fire extinguishing substances | Use extinguishing media appropriate for surrounding fire. |
| Autoignition temperatures | Not applicable |
| Hazardous combustion products | Sulfur dioxide and sulfur trioxide, nitrogen, sulfuric acid and ammonia. |
| Explosion data | |
| Sensitivity to mechanical impact | Not applicable |
| Sensitivity to static discharge | Not applicable |
| Special firefighting procedures | As for surrounding fire. Fire fighters should wear full protective clothing and self contained breathing equipment. |
|
Personal precautions |
Wear appropriate protective equipment. |
|
Environmental precautions |
Prevent from entering sewers, waterways or low areas. |
|
Methods for cleaning up |
Isolate hazard area and restrict access. Small spills: soak up with inert absorbent material and scoop into containers. Large spills: prevent contamination of waterways. Dike and pump into suitable containers. Clean up residual with absorbent material, place in appropriate container and flush with water. |
|
Handling |
Do not ingest. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. |
| Storage | Keep out of reach of children. Keep container tightly closed. Store in a cool, dry area. |
|
Engineering controls |
Provide exhaust ventilation to keep airborne levels below recommended exposure limits. |
| Respiratory protection |
If exposure exceeds occupational exposure limits, use an appropriate NIOSH approved respirator |
| Eye protection |
Chemical goggles. Wear a face shield if splashing hazards exists. |
| Other protection |
Wear protective clothing as necessary to prevent skin contact. |
Exposure limits:
| INGREDIENT | ACGIH | OSHA | Other |
| Sulphamic acid | Not available |
| Physical state | Solid |
| Solubility in water | 10% |
| Boiling point | Not available |
| Vapour pressure | Not available |
| Vapour density | Not available |
| Evaporation rate | Not available |
| Freezing point | Not available |
| Odour threshold | Not available |
| Sp. Gravity | 1 |
| pH | Not available |
| Appearance & odour | white odourless crystalline solid |
|
STABILITY |
Stable |
|
Conditions of instability |
Not available |
|
Incompatibility |
( ) Water (X) Oxidizers ( ) Acid ( ) Base (X) Other: chlorine, hypochlorous acid and sodium hypochlorite (bleach). |
|
Conditions of reactivity |
Not available |
|
Hazardous decomposition products |
Not available |
| POTENTIAL ACUTE HEALTH EFFECTS | |
| Inhalation | Corrosive to respiratory system. |
| Ingestion | Harmful if swallowed. Causes burns to mouth, throat and stomach. |
| Eye contact | Corrosive to eyes. Causes severe burns. |
| Skin contact | Causes burns. |
| Skin absorption | Not applicable |
| POTENTIAL CHRONIC HEALTH EFFECTS | |
| Inhalation | Repeat or prolonged exposure may cause damage to lungs. |
| Ingestion | Perforation of the esophagus and stomach lining may occur. |
| Eye contact | Prolonged contact may lead to cataracts, glaucoma and permanent blindness. |
| Skin contact | Prolonged contact may cause dermatitis or chemical burns. Toxic effects may be delayed. |
| Skin absorption | Not applicable |
| Irritancy of product | See WHMIS criteria |
| Sensitization of product | Not available |
| Carcinogenicity: | |
| IARC (1, 2A or 2B) | No known significant effects. |
| ACGIH: (A1, A2 or A3) | No known significant effects. |
| Reproductive toxicity | No known significant effects. |
| Teratogenicity | No known significant effects. |
| Mutagenicity | No known significant effects. |
| Synergistic product | Not available |
|
HAZARDOUS INGREDIENTS |
CAS NO |
TOXICITY DATA |
| Sulphamic acid | 5329-14-6 | LD 50 Oral (rat) 1450 mg/kg |
| Ecotoxicological information | Not available |
| Other information |
|
Waste disposal |
Disposal of all waste must be done according to local, provincial and federal regulations. |
|
TDG classification |
Sulphamic acid; Class 8; UN 2967; PG III,PG II |
|
WHMIS |
E | Corrosive material |
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR.
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Goggle manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Goggle at a competitive price from us. We have ready stock of Goggle in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
