Detergent & Soap-12 | Page 5 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: Petroleum jelly is a a semisolid jelly-like substance.

Product Technical Specification:

CHARACTERISTICS	:	SPECIFICATION
Description	:	A White Translucent Unctuous Mass, Slightly Fluorescent in daylight when melted, odourless, when wubbed on the skin
Solubility	:	Slightly soluble in Methylene Chloride, insoluble in Water, Ethanol (96%) & Glycerol
Drop Point Deg.C	:	40 – 60
Consistency Dmm	:	100-300
Infrared Absorption of A 0.05 % W/V solution In 2,2,4 – trimethylpentane, at about 290 Nm	:	As per specification
Acidity or Alkalinity	:	As per specification
Polycyclic Aromatic Hydrocarbons	:	As per specification
Sulphated Ash,%	:	0.05 Maximum

Remarks:

HANDLING & STORAGE

Handling: Avoid contact with skin and eyes. Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Keep away from all ignition sources.

Storage: Store in cool, well- ventilated place away from sources of heat and direct sunlight. Keep container tightly closed. Keep only in the original container.

HEALTH & SAFETY:
Product is unlikely to present any significant health or safety hazards when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.

Images:

DI ETHANOL AMINE AR

Product Short Description: Diethanolamine is used in metalworking fluids for cutting, stamping and die-casting operations as a corrosion inhibitor. In the production of detergents, cleaners

Product Technical Specification:

Remarks:

Images:

Cocamide MEA

Product Short Description: Alkylalkanol typed Nonionic Surfactant Cocamide MEA is an excellent viscosity index improver and foam stabilizer.

Product Technical Specification:

Appearance @ 25 Deg C	Waxy Flake
Infrared Spectrum	Matches Standard
pH (1% Solution)	9.0 – 11.0
Melting Point	61.0 – 64.0 °C
Gardner Color @ 70 Deg C	3 Max
Acid Value	2.0 Max
Ester, %	15.0 Max
Monoethanolamine, %	1.5 Max
pH (10% Aqueous)	9.0 – 11.0
Free Fatty Acid, (MW 200), %	2.0 Max
Glycerine, %	7.0 – 12.5
Specific Gravity, @ 60°C	0.97
Total Plate Count (CFU/g)	<10

Remarks:

Images:

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

Product Short Description: Brown Soap SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

Product Technical Specification:

The product is clear with a clean odour.

Important health, safety and environmental information RTU

pH (5% solution)	10.5-11.5
Boiling point/boiling range	NA
Freezing point	NA
Flash point	Not Volatile
Flammability (solid, gas)	Completely Non Flammable
Explosive properties	Not explosive
Oxidising properties	Not an oxidiser
Vapour pressure	Not Vepourized at room temperature
Relative density	Greater than water
Solubility	100% in water
Specific gravity	1.01
RVOC%	0.00
Colour	Brownish
Total Fatty Matter	35.0 – 38.0

Remarks:

Also called Brown Soap Solution.

Images:

CARGO Clean Heavy Duty

Product Short Description: Heavy duty Alkaline Cleaner for cargo containing specially selected surfactant and powerful long chain organic syndet , specific salts with surfactants & wetting agents .

Product Technical Specification:

Product Properties:

Appearance	Pale / Brownish liquid
Density	In g/cm3 at 20°C: Spec. gravity : 1.035
Compatibility
Metal	No known effect
Rubber	No known effect
pH	Alkaline ( 12.7 - 13 )
Flash point	Not Applicable
Solubility	100% soluble in water
Packaging	Size (in Litres) : 25, 50, 210 Ltr

Remarks:

We are keeping ready stock of Cargo Clean HeavyDuty HD and Other Ship Hold Cleaning Detergent at Indian UAE and Oman. Cleaning of Hold can be easy, if selection of your detergent is selective against CARGO nature. For Example Cement Cargo can't be clean by Alkaline Based materails, simillarly Coal Cargo can't be cleaned by Acidic Materials. In this link we tried to keep suitable cargo cleaner.. http://rxmarine.com/ALKAATUFF-Heavyduty-Alkaline-ship-hold-cleaning-detergent-and-chemicals

Images:

Sodium Thiosulfate Pentahydrate Solution

Product Short Description: Sodium Thiosulfate used as a Pond / Aquarium Dechlorinator. This product also used as a Photography as a fixing agent (hypo) to dissolve unchanged silver salts from exposed negatives.

Product Technical Specification:

IUPAC name :Sodium thiosulfate

Other names:Sodium hyposulfite, Hyposulphite of soda

Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)

UNII :L0IYT1O31N Y

ChEMBL CHEMBL : 1201157 N

RTECS number :XN6476000

Molecular Formula	Na₂S₂O_3.5H2O
Molar Mass	158.11 g/mol
Appearance	white crystals
Odor	odorless
Density	1.667 g/cm³
Melting Point	48.3 °C (pentahydrate)
Boiling Point	100 °C (pentahydrate, - 5H₂O decomp)
Solubility in Water	76.4 g/100 g H20(20 °C)

IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda

Identifiers

CAS number : 7772-98-7 Y,

10102-17-7 : (pentahydrate)

PubChem: 24477

ChemSpider :22885 Y

UNII :L0IYT1O31N Y

ChEMBL CHEMBL : 1201157 N

RTECS number :XN6476000

Remarks:

Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended.

Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties:
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2

Images:

Car Shampoo

Product Short Description: A new and exciting silicon base product treated for the really tough cleaning problem faced on the proper maintenance of AUTOMOBILES. our shampoo globules keep apart by mutual repulsion and are said to have been emulsified grease globules bearing dirt can

Product Technical Specification:

Appearance/Odour	: Liquid Green / Yellow, Pleasant odour
pH	: 8.5
Boiling point/boiling range	: 100 ºC
Melting point	: Not applicable.
Flammability (solid, gas)	: Not classified
Explosive properties	: Not classified
Oxidising properties	: Not classified
Flash point	: Not applicable.
Relative density	: 1
Water solubility	: Complete
Evaporation rate	: No data available

Remarks:

Images:

BORAX

Product Short Description: Borax is classified as a detergent booster in laundry detergent as a versatile cleaning agent.

Product Technical Specification:

COA

Product Name	Borax
Number of Analysis	T0004482
Producer / Producer Batch Number	Borax Francais / Y01N
Batch Number / Weight	18J25-H08-00102 / 1kg

Tests	Requirement	Result	Unit	Standard remark
Appearance	White or almost white, crystalline powder, colourless crystals or crystalline masses, efflorescent	Conform
Particle size	>= 90% < 250μm	96	%	Sieveanalysis
Particle size	>= 80% < 200μm	90	%
Identification A	Green border	Conform		Borium
Identification B	Conform	Conform
Identification C	Conform	Conform		Sodium
Appearance of solution	Clear and colourless	Conform		4%m/V H2O
pH	9,0 - 9,6	9,2		4%m/V H2O
Sulfates	<= 50	Conform	ppm
Ammonium	<= 10	Conform	ppm
Arsenic	<= 5	Conform	ppm
Calcium	<= 100	Conform	ppm
Assay Disodium tetraborate decahydrate	99,0 - 103,0	100,1	%
Metallic residues	CHMP/ICH/353369/2013	Conform		DP
Residual solvents	CPMP/ICH/82 260/06	Conform		DP
TSE/BSE-statement	No contamination with TSE/BSE-risk materials	Conform		DP

Remarks:

Images:

LiveChat

Search form

Petroleum Jelly

POTASSIUM CARBONATE ANHYDROUS

DI ETHANOL AMINE AR

Cocamide MEA

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

CARGO Clean Heavy Duty

TPOL High Quality 5 Ltr Bucket

Sodium Thiosulfate Pentahydrate Solution

Car Shampoo

BORAX

RX SOL

LATEST POSTS

Buffer Cleaner

Caustic Soda

Find Us

LiveChat