Conductivity Standard 84 µS/cm
- Part number
- RXSOL-62-5521-500
- Category
- Test Kit For Water
- Brand
- RXSOL
Overview
It is a premium quality 84 µS/cm conductivity standard that is prepared against a NIST traceable potassium chloride solution. RXSOL conductivity solutions have the lot number and expiration date clearly marked on the label and are air tight with a tamper-proof seal to ensure the quality of the solution.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Conductivity Standard 84 µS/cm |
| Part Number | RXSOL-62-5521-500 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Sikka, Kandla, Dahej , Hazira, JNPT,Chennai, Vizag, Paradip, Haldia, Kolkata,Fujairah
| Phone | +91 22 27815540 / 27815542 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | Weight % |
| Aqueous solution |
| Appearance |
Form: liquid Color: colorles |
| Odor | Odorless |
| Classification | This material is classified as not hazardous |
| Regulatory status | This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200) and SIMDUT in Canada. |
Hazards not otherwise classified
| Inhalation | Move victim to fresh air. Seek medical attention. |
| Skin Contact / Absorption | Remove residues with water. Change contaminated clothing. In case of skin reactions, consult a physician. |
| Eye Contact | With eyelids open, wash out eyes for several minutes under flowing water. In case of troubles or persistent symptoms, consult an opthalmologist. |
| Swallowing |
Rinse mouth and drink large quantities of water. If you feel unwell, seek medical advice. |
| Most important symptoms/effects, acute and delayed | No data available . |
| Information to physician | Treat symptomatically. |
| Flash Point | Not combustible |
| Auto-ignition temperature: | Not data Available |
| Suitable extinguishing media | Product is non-combustible. Extinguishing materials should therefore be selected according to surroundings. |
| Specific hazards arising from the chemical | Fires in the immediate vicinity may cause the development of dangerous vapors |
| Protective equipment and precautions for firefighters: | In case of surrounding fires: Wear self-contained breathing apparatus. |
| Personal precautions | Wear suitable protective clothing. Avoid contact with skin, eyes, and clothing. |
| Environmental precautions | Do not allow to penetrate into soil, waterbodies or drains. |
| Methods for clean-up | Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder. Store in special closed containers and dispose of according to ordinance. Wash spill area with plenty of water. |
| Advices on safe handling | Avoid prolonged and intensive skin contact. |
| Specific use(s) | Do not allow to penetrate into soil, waterbodies or drains. |
| Methods for clean-up | Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder. Store in special closed containers and dispose of according to ordinance. Wash spill area with plenty of water. |
| Engineering controls | Provide good ventilation and/or an exhaust system in the work area. See also information in chapter 7, section storage. |
| Personal protection equipment (PPE) | Eye/face protection : Tightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010. |
| Skin protection |
Wear suitable protective clothing. Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: natural rubber, nitrile rubber, butyl caoutchouc (butyl rubber). Breakthrough time: > 480 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time. |
| Respiratory protection | Provide adequate ventilation. |
| General hygiene considerations | Change contaminated clothing. Wash hands before breaks and after work. |
Information on basic physical and chemical properties.
| Appearance Form | liquid |
| Colour | colorless |
| Odour | Odourless |
| Odor threshold | No Data Available |
| pH value | 20 °C: 4.0 - 8.0 |
| Melting Point/Freezing Point | No Data Available |
| Initial Boiling Point and Boiling Range | approx. 100 °C |
| Flash point/Flash point range | Not Combustible |
| Evaporation Rate | No Data Available |
| Flammability | No Data Available |
| Explosion limits | No Data Available |
| Vapor pressure | No Data Available |
| Vapor density | No Data Available |
| Density | at 20 °C: approx. 1.0 g/mL |
| Water solubility | at 20 °C: infinitely soluble |
| Partition coefficient: n-octanol/water | No Data Available |
| Auto-ignition temperature | No Data Available |
| Thermal decomposition | No Data Available |
| Additional information | No Data Available |
| Reactivity | No data available |
| Chemical stability | Product is stable under normal storage conditions. |
| Possibility of Hazardous Reaction | No hazardous reactions known. |
| Conditions to Avoid | No Data Available |
| Incompatible Materials | Strong acids and alkalis |
| Hazardous Decomposition Products | Fires in the immediate vicinity may cause the development of dangerous vapors. |
| Thermal decomposition | No Data Available |
Toxicological tests
Toxicological effects :
| Acute toxicity (oral) |
Lack of data |
| Acute toxicity (dermal) | Lack of data |
| Acute toxicity (inhalative) | Lack of data |
| Skin corrosion/irritation | Lack of data |
| Eye damage/irritation | Lack of data |
| Sensitisation to the respiratory tract | Lack of data |
| Skin sensitisation | Lack of data |
| Germ cell mutagenicity/Genotoxicity | Lack of data |
| Carcinogenicity | Lack of data |
| Reproductive toxicity | Lack of data |
| Effects on or via lactation | Lack of data |
| Specific target organ toxicity (single exposure) | Lack of data |
| Specific target organ toxicity (repeated exposure) | Lack of data |
| Aspiration hazard | Lack of data |
Ecotoxicity
| Further details | No Data Available |
| Mobility in soil | No Data Available |
| Persistence and degradability: Further details | No Data Available |
|
Additional ecologicaLinformation General information |
Do not allow to enter undiluted resp. in large quantities into surface water or into drains. |
Product
| Recommendation | Dispose of waste according to applicable legisla |
| Contaminated packaging Recommendation | Dispose of waste according to applicable legislation. Non-contaminated packages may be recycled. |
USA: Department of Transportation (DOT)
| Proper shipping name | Not controlled under |
| Sea transport (IMDG) Proper shipping name | Not restricted |
| Marine pollutant | No |
| Air transport (IATA)Proper shipping name | Not restricted |
| Further information | No dangerous good in sense of these transport regulations. |
National regulations - Great Britain
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 0 (Minimal)
Reactivity: 0 (Minimal)
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 0 (Minimal)
Physical Hazard: 0 (Minimal)
Personal Protection: B
Reason of change: General revision (Regulation (EU) No 2015/830)
Date of first version: 3/3/2011
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information.
The information in this data sheet has been established to our best knowledge and was up-to-date at time of revision. It does not represent a guarantee for the properties of the product described in terms of the legal warranty regulations.
Availability
Conductivity Standard 84 µS/cm manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Conductivity Standard 84 µS/cm at a competitive price from us. We have ready stock of Conductivity Standard 84 µS/cm in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
