RXSOL ORG-16 Condenser Water Scale Corrosion Inhibitor
- Part number
- RXSOL-40-4042-210
- Category
- Cooling Water Chemical
- Brand
- RXSOL
Overview
RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) is a unique blend of organic scale and corrosion inhibitors and polymeric dispersants. It is designed to replace metallic based corrosion inhibitor formulations where environmental restrictions prevent their use. RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) contains an organic sequestrant, which will prevent the formation of scale on heat transfer surfaces. It also contains a Zinc dispersant for the prevention of fouling and the dispersion of suspended solids.RXSOL ORG-16 (Condenser Water Scale & Corrosion Inhibitor) contains low level molybdate for ease of testing of dosages. Corrosion of both ferrous and copper alloys is controlled by a combination of organic corrosion inhibitors.
Technical specifications
PHYSICAL PROPERTIES
| Color & Form | Clear amber liquid |
|---|---|
| Specific Gravity | 1.053 |
| Product pH | 14 |
| Density | 8.779 lbs./gal |
| Odor | Slightly aromatic |
Applications
RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) is intended for use in industrial open cooling water systems. It can be used in an alkaline treatment program or in conjunction with acid for pH control. This product is particularly recommended for use in systems having very high heat transfer rates and high operating temperatures.
Dosage and directions
RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) is best fed by a makeup meter impulsed chemical feed system designed to feed the treatment in proportion to makeup flow.
RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) should be maintained at the recommended treatment level at all times to insure continuous protection.
For best results, feed RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) directly from the shipping container. If necessary, it can be diluted in a chemical feed tank using low hardness water or dilute according to Technical executive which proper feed rate and treatment dosage based on system operating parameters.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) |
| Product Type | RXSOL-40-4042-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| Name | CAS# | % by Weight |
|
Polymaleic acid |
26099-09-2 |
10-15 |
| Phosphonobutane tricarboxylic acid (PBTC) | 37971-36-1 | 1 – 5 |
| Hydroxyethylidene diphosphonic acid (HEDP) | 2809-21-4 | 1 – 5 |
| Sodium molybdate | 7631-95-0 | <1 |
| Emergency | May cause irritation to eyes and skin. May cause irritation to mucous membranes and respiratory tract. Wear safety glasses and gloves when handling. Wash thoroughly after handling. |
| Eyes | Exposure to liquid product may cause moderate to severe irritation to eyes. Symptoms of exposure may include redness, swelling, tearing or pain. |
| Skin | Exposure to liquid product may be slightly irritating to skin. Symptoms of exposure may include redness, swelling or pain. |
| Inhalation | Inhalation of vapors or fumes may be irritating to mucous membranes and respiratory tract. |
| Ingestion | Exposure to liquid product is not expected to result in significant adverse effects. |
| Chronic | Effects of chronic exposure are not expected to differ from the above-mentioned contact. |
|
Eye Contact |
If this product contacts the eyes, immediately flush eyes with plenty of clean running water for at least fifteen (15) minutes, lifting the upper and lower eyelids occasionally. Remove contact lenses if worn. Seek medical attention if irritation persists. |
|
Skin Contact |
If this product contacts the skin, immediately flush the affected area with soap and water for at least fifteen (15) minutes. If the product penetrates the clothing, promptly remove the contaminated clothing or shoes, and flush the affected area as described. Seek medical attention if irritation persists. |
|
Inhalation |
If this product is inhaled and symptoms occur, move the exposed person to fresh air promptly. Seek medical attention if symptoms persist. |
| Ingestion | If this product is ingested, drink small amounts of water and seek medical attention promptly. Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. |
|
Notes to Physician |
Treatment of overexposure should be directed at the control of symptoms and the clinical condition of the patient. |
|
flash point |
None – aqueous solution. |
|
flammable limits |
NA |
|
autoignition temperature |
NA |
|
extinguishing media |
Use water, foam, dry chemical or carbon dioxide to extinguish fire. |
|
fire/explosion hazard |
Dried residue can thermally decompose, giving off irritating and possibly toxic fumes. |
|
fire fighting equipment |
Fire fighters should wear full protective equipment, and have selfcontained breathing apparatus available. |
|
special procedures |
Use water to cool containers exposed to a fire. |
|
hazardous combustion products |
Oxides of carbon, possibly toxic phosphines. |
|
personal precautions |
Use proper personal protection (refer to Section 8). |
|
environmental precautions |
Run off from fire control or dilution water may cause pollution. Keep out of drains, municipal sewers, open bodies of water and water course. |
|
clean-up methods |
Safely stop source of spill. Clean up spills immediately. Restrict non-essential personnel from the area. Wear protective clothing, goggles and respirator if ventilation is not adequate.Dike spill area and soak up material with sand or other absorbent. Place into chemical waste container for disposal according to local, state or federal regulations. Neutralize residue with lime or soda ash and flush spill area with water. |
|
Handing |
Use proper personal protection when handling (refer to Section 8). Use under wellventilated conditions. Avoid contact with eyes, skin and clothing. Avoid breathing vapors and mists. Avoid prolonged or repeated contact. Do NOT ingest. Wash thoroughly after handling. Rinse container before disposal. |
| self life | The recommended shelf life is two (2) years. It is recommended that products be retested if stored for more than two (2) years. Under ideal storage conditions, the shelf life is almost indefinite |
| storege | The recommended storage temperature is above 32oF, preferably at room temperature (70oF). |
| genral | Store closed containers in a cool, dry, well-ventilated area away from incompatible materials. This product is stable under normal conditions of handling and storage. Avoid cold temperatures. |
|
eye protection |
To avoid contact with eyes, use safety glasses or chemical splash goggles. Face shield is recommended. Eye wash station should be available in the work area. |
|
hand protection |
Use rubber or plastic gloves to minimize skin contact. |
|
body protection |
A rubber apron and boots are recommended to minimize contact. Full drench shower should be available in the work area. |
|
respirator |
Use of respirator protection is not generally required. However, if exposure is above the stated limits or ventilation is inadequate, use a NIOSH approved acid gas/organic vapor respirator to reduce potential for inhalation exposure. When using respirator cartridges, they must be changed frequently to assure breakthrough exposure does not occur. |
|
ventilation |
General mechanical ventilation is recommended for enclosed areas. |
| Appearance | Clear, yellow liquid |
| Odor | Slight medicinal |
| Specific Gravity @ 68oF | ~ 1.053 |
| pH | ~ 2.14 |
| Water Solubility | Complete |
| Boiling Point | > 100oC / 212oF |
| Freezing Point | 0oC / 32oF |
| Vapor Pressure | ND |
| Vapor Density (air = 1) | ND |
| VOC Content | < 2% |
|
general stability |
This product is stable at ambient temperatures and atmospheric pressures. |
|
incompatible materials |
Strong alkali and oxidizing materials. |
|
hazardous polymerization |
Hazardous polymerization is not expected to occur under normal temperatures and pressure |
|
hazardous decomposition products |
Oxides of carbon, possibly toxic phosphines. |
|
emergency overview: |
CAUTION: May cause irritation to eyes and skin. May cause irritation to mucous membranes and respiratory tract. Wear safety glasses and gloves when handling. Wash thoroughly after handling. |
| Eyes | Exposure to liquid product may cause moderate to severe irritation to eyes. Symptoms of exposure may include redness, swelling, tearing or pain. |
| Skin | Exposure to liquid product may be slightly irritating to skin. Symptoms of exposure may include redness, swelling or pain. |
| Inhalation | Inhalation of vapors or fumes may be irritating to mucous membranes and respiratory tract. |
| Ingestion | Exposure to liquid product is not expected to result in significant adverse effects. |
|
chronic |
Effects of chronic exposure are not expected to differ from the above-mentioned contact. |
NA
Do NOT dump into any sewers, on the ground or into any body of water. Rinse containers before disposal. Since emptied containers contain product residue, follow label warnings even after container is emptied. Dispose in accordance with all applicable federal, state and local laws and regulations.
The data provided in this section is for information only. Please apply the appropriate regulations to properly classify your shipment for transportation.
US DOT
Proper Shipping Name: Not DOT regulated
Hazard Class: NA
Hazard Identification Number: NA
Packing Group: NA
Transport Label: Scale Preventing/Scale Removing Liquid or Paste
NA
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) at a competitive price from us. We have ready stock of RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
