|
Porduct Name |
Butyl Stearate |
|
Part Number |
RXSOL-19-1257-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
|
Phone |
+91 22 20871200 - 1400 |
|
Fax |
+91 22 27612100 :::AOH :0091 9821214367 |
|
Email |
rxsolchemicals@gmail.com |
|
Website |
www.rxmraine.com |
|
Chemical Name |
Cas No |
EC No |
Whight |
Formula |
|
Butyl Stearate |
123-95-5 |
204-666-5 |
<= 100 % |
C22H44O2 |
|
Classification of the substance or mixture |
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
|
Other hazards |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
If inhaled |
After inhalation: fresh air. |
|
Eye Contact |
After eye contact: rinse out with plenty of water. Remove contact lenses. |
|
Swallowed |
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
|
Skin Contact |
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
|
Most important symptoms and effects, both acute and delaye |
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
|
Indication of any immediate medical attention and special treatment needed |
No data available |
|
Suitable extinguishing media |
Foam Carbon dioxide (CO2) Dry powder |
|
Unsuitable extinguishing media |
For this substance/mixture no limitations of extinguishing agents are given. |
|
Special hazards arising from the substance or mixture |
Carbon oxides Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire. |
|
Further information |
Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Advice for firefighters |
In the event of fire, wear self-contained breathing apparatus. |
|
Personal precautions, protective equipment and emergency procedures |
Advice for non-emergency personnel: Do not breathe vapors, aerosols. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
|
Enviromental Precaution |
Do not let product enter drains. |
Methods and materials for
containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. |
|
Reference to other sections |
For disposal see section 13. |
|
Precautions for safe handling |
For precautions see section 2.2. |
|
Storage conditions |
Tightly closed. |
|
Storage class |
Storage class (TRGS 510): 10: Combustible liquids |
|
Specific end use(s) |
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
|
Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
|
Respiratory protection |
Not required; except in case of aerosol formation.
|
|
Control of environmental exposure |
Do not let product enter drains. |
|
Physical state |
Liquid |
|
Colour |
Light Yellow |
|
Odour |
No data available |
|
pH |
No data available |
|
Melting Point |
17 - 22 °C |
|
Boiling Point |
343 °C at 1.013 hPa |
|
Flash Point |
160 °C - closed cup |
|
Flammability (solid, gas) |
No data available |
|
Upper/lower flammability or explosive limits |
No data available |
|
Autoignition temperature |
No data available |
|
Decomposition temperature |
No data available |
|
Vapour pressure |
No data available |
|
Viscosity |
No data available |
|
Density |
0,861 g/mL at 20 °C - lit |
|
Relative Density |
No data available |
|
Partition coefficient |
No data available |
|
Explosive properties |
No data available |
|
Solubility |
No data available |
|
Particle characteristics |
No data available |
|
Reactivity |
Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical. |
|
Chemical stability |
The product is chemically stable under standard ambient conditions (room temperature) . |
|
Possibility of hazardous reactions |
No data available |
|
Conditions to avoid |
Strong heating. |
|
Incompatible materials |
Strong oxidizing agents
|
|
Hazardous decomposition products |
In the event of fire: see section 5 |
|
Acute toxicity |
LD50 Oral - Rat - 32.000 mg/kg Inhalation: No data available Dermal: No data available |
|
Skin corrosion/irritation |
No data available |
|
Serious eye damage/irritation |
No data available |
|
Respiratory or skin sensitization |
No data available |
|
Carcinogenicity |
No data available |
|
Germ cell mutagenicity |
No data available |
|
Reproductive toxicity |
No data available |
|
Specific target organ toxicity - single exposure |
No data available
|
|
Additional Information |
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: WI2900000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
|
Persistence and degradability |
No data available |
|
Toxicity |
No data available |
|
Mobility in soil |
No data available |
|
Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties |
Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
|
Other adverse effects |
No data available . |
|
Waste treatment Method |
No data available |
|
UN number |
ADR/RID: - IMDG: - IATA: - |
|
UN proper shipping name |
ADR/RID:Not dangerous goods IMDG:Not dangerous goods IATA:Not dangerous goods |
|
Transport hazard class(es) |
ADR/RID: - IMDG: - IATA: - |
|
Packaging group |
ADR/RID:- IMDG: - IATA: - |
|
Environmental hazards |
ADR/RID: No IMDG: No IATA: No |
|
Special precautions for user |
No data available |
|
Further information |
Not classified as dangerous in the meaning of transport regulations. |
|
Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
|
Chemical Safety Assessment |
For this product a chemical safety assessment was not carried out |
|
Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|
