Your shopping cart is empty.
Product Code: RXSOL-43-4035-210
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25 degree C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Hydro Testing Corrosion Inhibitor RXSOL 4000 is a cocktail of water soluble chemicals designed to protect pipelines from corrosion during hydrostatic testing and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 incorporates oxygen scavenger to rapidly remove oxygen, biocide to prevent Microbial Influenced Corrosion (MIC), together with a film forming corrosion inhibitor to combat acid (low pH) corrosion. Hydro Testing Corrosion Inhibitor RXSOL 4000 represents a single stage treatment chemical treatment, for hydrotest and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 is a completely soluble product in fresh water, seawater and in most oilfield brine solutions. It is, therefore, suitable for use in water injection systems (which have no mechanical deaeration), hydrotest and mothball operations, and as a packer fluid. Hydro Testing Corrosion Inhibitor RXSOL 4000 has been used in a large number of major projects in the North Sea, Latin America and South East Asia.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
Product Code: RXSOL-67-6709-210
Performance Characteristics
Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.
Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of RXSOL CIA 222.
Slump and Temperature Development: RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.
Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by RXSOL CIA 222.
Product Code: RXSOL-43-4303-025
TYPICAL PROPERTIES
| Appearance | : | Light yellow liquid |
| Specific Gravity @25° C | : | 1.14 |
| Flash Point | : | None |
| Freeze Point | : | -8° C |
| Water Solubility | : | Completely Soluble |
Product Code: RXSOL-19-1340-210
Product Code: RXSOL-42-1519-500
Standardized at 25°C against chemicals whose certification is traceable to NIST.
Formula: C₁₀H₁₄N₂Na₂O₈·2H₂O
MW: 372.24 g/mol
Melting Point: 255 °C
Storage Temperature: Ambient
CAS Number: 6381-92-6
EINECS: 205-358-3
Product Code: RXSOL-22-2148-002
Product Code: RXSOL-22-2148-006
Product Code: RXSOL-19-1780-020
| CAS NO. | 151-21-3 |
| EINECS NO. | 205-788-1 |
| FORMULA | CH3(CH2)11OSO3Na |
| MOL WT. | 290 - 310 |
| Appearance | White Powder |
| Active Matter % | 95 Min |
| pH (1% Aqueous Solution) | 8.5 - 10.5 |
| Sodium Sulphate % | 4.0 Max |
| Sodium Chloride % | 0 .5 Max |
| Un-Sulfated Matter % | 2.0 Max |
| Moisture % | 2.0 Max |
Product Code: RXSOL-41-4198-030
Product Code: RXSOL-81-8205-230
|
Property |
Value |
|
|
|
||
|
Physical state |
Liquid |
|
|
Color |
Colorless |
|
|
Odor |
Ammonia-like |
|
|
Density |
1.04 g/cm @ 20°C |
|
|
Melting / boiling point |
-21.3 / 243.3 °C |
|
|
Explosive properties |
No data available |
|
|
Self-ignition temperature |
280 °C |
|
|
Vapor pressure |
0.1 hPa @ 54.8°C |
|
|
Mol weight |
119.16 g/mol |
|
|
Water solubility |
Soluble |
|
|
Flash point |
138°C |
|
| Molecular Formula | C5H13NO2 |
| Molecular Weight | 119.16 g/mol |
| Autoignition Temperature | 280 °C |
| Critical Pressure | 37 000 hPa |
| Critical Temperature | 404 °C |
| Dissociation constant | 25°C 8.68 |
| Freezing Point | 21.3 °C |
| Heat Capacity | 20°C 1.72 kJ/kg·K |
| Heat of Formation | 91 649 kJ/kmol |
| Heat of Vaporization | 418.7 kJ/kg |
|
Octanol-water partition coefficient, log Pow
(pH 10.5; at 23°C)
|
1.16 |
| Refractive Index | 20°C 1.4642 |
| Vapor Density | (air = 1) 4 |
| Vapor Pressure | 20°C 0.0031 hPa |
| Viscosity | 20°C 99.05 mm2 |
Product Code: RXSOL-81-8206-210
| Appearance | Liquid |
| State | Viscous liquid |
| Colour | Clear to opaque |
| pH at 20oC±1°C | 6.5 - 8.5 |
| Specific Gravity at 20°C+1°C | 1.0 ± 1.05 |
| Pour point | (-) 5°C |
Product Code: RXSOL-19-6605-925
