Alkalinity Test Kit p-m Total
- Part number
- RXSOL-62-5515-001
- Category
- Test Kit For Water
- Brand
- RXSOL
Overview
The presence of alkalinity in a water sample may be due to many different substances. However, for the sake of simplicity, the presence of bicarbonate, carbonate, and hydroxide ions is commonly considered as alkalinity. The points of change in colour of phenolphthalein and methyl orange indicators, which occur at pH 8.3 and pH 4.3 provide standard reference points which are almost universally used to express alkalinity.
Very high alkalinity values can be undesirable in an industrial water supply. For example, the presence of a high methyl orange alkalinity should be avoided in boiler feed water because of the resultant carbon dioxide content of the steam. Carbon dioxide usually is responsible for the corrosion of steam and return lines. High boiler water alkalinities are also undesirable because the presence of high hydroxide ion concentration is the primary cause of caustic metal embrittlement. A very high boiler alkalinity can also lead to an undesirable carryover condition. On the other hand, the alkalinity of boiler water must be sufficiently high to protect the boiler metal against acidic corrosion and to ensure precipitation of scale forming salts. Usual treatment approaches include setting both a minimum alkalinity level and an operating range.
Hydroxide alkalinity may be determined by adding barium chloride prior to titration to precipitate the carbonate ion from solution, allowing direct titration of the hydroxide alkalinity. Measurement of hydroxide alkalinity is also used to control lime soda softeners.
In cooling water systems, alkalinity is of major importance since the total alkalinity of a water is one factor that must be considered when predicting the tendency for the water to precipitate calcium carbonate scale. Depending on the choice of chemical treatments to protect against corrosion and scale formation, the operating alkalinity and pH ranges are chosen to balance these two features.
Water Testing Procedures Manual ( Full Range ) ::: Available with us at 2700 INR or 54 US$ or 207 AED
Technical specifications
OFFER :::---
Do not forget to ask JUMBO PACK OFFER ( TK - extra pack )
Ask for FREE TK extra pack
Applications
p Alkalinity and Total Alkalinity :
Optimum Result : p-Alkalinity level is between 100 to 150 PPM is suggested.
if p-Alkalinity level is more then 150 ppm then level should be reduced by increased BLOW DOWN process with immediate effect.
For Below 50 ppm , Dose ½ Ltrs of RXSOL-50-5001-BWT for 1000 Ltrs of BOILER WATER , to maintain p-Alkalinity level 100 ppm.
:::::::::::::::::::::Alkalinity TEST FOR BOILER & COOLING WATER ::::::::::::::::::::::::
| REAGENT & APPARATUS | |
| Reagent: RXSOL TK 7 , TK 8 , TK 9 , . Apparatus : TEST TUBE , Titrator or DROPPER | |
| A.) PROCEDURE for p-ALKALINITY test ( STEP WISE ) | |
| 1 |
Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER |
| 2 |
Add 1-2 drops of RXSOL TK7 and mix with the stirring rod , If sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) . |
| 3 |
Add RXSOL TK9 drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 25 ppm of p-Alkalinity , expressed as CaCO3 |
| RESULT | Each DROPS is equivalent to 25 PPM of p-Alkalinity. |
| NOTE | p-Alkalinity VALUE = 25 X ( Total Number of DROPS of TK9 , during 3rdstep ) |
Dosage and directions
|
|
|
| C.) PROCEDURE for TOTAL ALKALINITY ( VALUE of A + VALUE of B ) | |
| 2.1 |
Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER |
| 2.2 |
Add 1-2 drops of RXSOL TK7 and mix with the stirring rod , If sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) then proceed to STEP- 4. |
| 2.3 |
Add RXSOL TK9 drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 15 ppm of p-Alkalinity , expressed as CaCO3 |
| 2.4 | Add 2-3 drops of RXSOL TK8 and mix with stirring rod , the sample will turn to BLUISH-GREEN . |
| 2.5 |
AddRXSOL TK9 carefully by counting drop by drop and mixing throughly until a light reddish ( salmon ) pink colour develop. |
| RESULT | Each DROPS is equivalent to 25 PPM of Alkalinity |
| NOTE |
p-Alkalinity ppm CaCO3VALUE = 25 X ( Total Number of DROPS of TK9 , during 2.3 step ) = X ( Say ) |
alkalinity test method , alkalinity method, alkalinity test procedure, alkalinity titrator chemicals, water alkalinity test kit
alkalinity test kit for boiler water and cooling water, alkalinity test kit instructions
Characteristics and notes
Optimum Result : p-Alkalinity level is between 100 to 150 PPM is suggested. if p-Alkalinity level is more then 150 ppm then level should be reduced by increased BLOW DOWN process with immediate effect. For Below 50 ppm , Dose ½ Ltrs of RXSOL-50-5001-BWT for 1000 Ltrs of BOILER WATER , to maintain p-Alkalinity level 100 ppm. Refill pack : REPLACEMENTS TK7 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available TK8 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available TK9 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available |
total alkalinity test kit manufacturer, Exporter and supplier in mumbai, kandla, Gandhidham, chennai, Ennore, Kolkata, Kakinada, Vizag, Manglore, Goa, Tuticorin, Fujairah, Dubai, Sharjah, Uae, Middle East
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Alkalinity Test Kit (p-m) Total |
| Part Number | RXSOL-62-5515-001 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Ingrident | CAS Number | Weiught Percentage |
| phenolphthalein Solution | 77-09-8 | 1 - 5% |
| Sodium Thiosulfate | 7772-98-7 | <1% |
| Bromophenol , sodium salt | 62625-280-9 | 1-2% |
| Classification | Flammable liquid, Category 2, H225 .Carcinogenicity, Category 1B, H350 Germ cell mutagenicity, Category 2, H341 |
| Signal Word | Hazard |
| Hazard Statement | May be harmful if swallowed. Causes skin irritation.Causes eye damage. |
| Precaunory Statement | Obtain special instructions before use.P210 Keep away from heat. P233 Keep container tightly closed. P281 Use personal protective equipment as required. Store in a well-ventilated place |
| Skin | Irritant |
| Eyes | Risk of damage to eyes. |
| Inhalation | Do not breathe vapour/spray |
| Ingestion | NA |
| Other Information | This solution is corrosive. It can cause eye and skin burns; if vapors or mists are inhaled, it may cause severe respiratory tract irritation with possible burns. If ingested, this product may cause severe digestive tract irritation with possible burns. |
| Skin | Generally the product does not irritate the skin. In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. |
| Eyes | Rinse opened eye for several minutes under running water. Check for and remove any contact lenses. Cold water may be used. Get medical attention. |
| Inhalation | Supply fresh air; consult doctor in case of complaints. If breathing is difficult, give oxygen. Get medical attention. |
| Ingestion | Rinse mouth with water. If swallowed, give a glass of water to drink. If vomiting occurs give further water. Seek medical advice. |
| Suitable extinguishing media | Carbon dioxide (CO2), Foam, Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Combustible material | Vapours are heavier than air and may spread along floors. |
| Forms explosive mixtures with air at elevated temperatures. | Development of hazardous combustion gases or vapours possible in the event of fire. |
| Special hazards arising from the substance or mixture | No further relevant information available |
|
Special protective equipment for firefighters |
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing |
| Further information | Cool closed containers exposed to fire with water spray. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Small Spillage | Always wear recommended personal protective equipment. Evacuate unprotected personnel. |
| Large Spillage |
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation. |
| Environmental precautions | Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water |
| Handling | Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Provide adequate ventilation |
| Storage | Store in the closed, original container in a dry, well ventilated area. Keep container tightly closed when not in use. Protect from light, heat and contamination by organic materials (will affect product stability). Keep away from Children. Store at +15°C to +25°C. |
| Incompatibilities | No further relevant information available. |
| Engineering Control | Local exhaust ventilation is recommended when vapours can be released in excess of established airborne exposure limits. Technical measures and appropriate working operations should be given priority over the use of personal protective equipment |
| Personal Protective Equipment | |
| Skin Protection | Disposable latex gloves and lab coat. See or follow local Standards for more information. |
| Eye Protection | For normal conditions, wear safety glasses. Where there is reasonable probability of liquid contact, wear chemical safety goggles. |
| Respiratory Protection | None generally required for adequately ventilated work situations. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. |
| General protective and hygienic measures | Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure. |
| Exposure Limits | |
| phenolphthalein Solution |
IN OEL Time Weighted Average 1,000 ppm (TWA):1,900 mg/m³ |
| Environmental exposure controls | Do not empty into drains. Risk of explosion. |
Gloves Suit
| Appearance | Clear. |
| Physical State | Liquid |
| Odor | Alochol / Charastics |
| Odor Threshhold | Not Applicable |
| pH | Not Applicable |
| Flash Point | Pheolthphlene - 22 °C / Other have not flash point |
| Boiling Point | 78.3 °C / 100 °C |
| Freezing Point | Not Applicable |
| Vapor Pressure | Not Applicable |
| Vapor Density (Air = 1.0) | Not Determine |
| Density | Not Applicable |
| Flammability | Not Applicable |
| Self-igniting | Product is not selfigniting. |
| Solubility in water | 100 % Soluble |
| Danger of explosion | Not Applicable |
| Stability Of Product | The product is stable. . |
| Thermal Decomposition | No decomposition if used according to specifications |
| Hazardous Decomposition | No dangerous reactions known. |
| Conditions to avoid | No further relevant information available |
| Incompatible materials | No further relevant information available. |
| Hazardous decomposition products | No dangerous decomposition products known. |
| Hazardous Polymerization | Will not occur. |
| Immediate (Acute) Effects |
Phenolphthalein Solution : Acute oral toxicity (LD50): 3600 mg/kg [Mouse]. ( alcohol). Acute dermal toxicity (LD50): 12800 mg/kg [Rabbit].(alcohol). Sodium Thiosulphate : LD50: Not available. LC50: Not available. |
| Primary irritant effect |
Ingestion: Swallowing can result in nausea, vomiting, diarrhoea, and abdominal pain. |
| Additional toxicological information | No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label. Symptoms or effects that may arise if the product is mishandled and overexposure occurs |
| Chronic effects | No information available for the product. |
| Acquatic toxicity | No further relevant information available |
| Persistence and degradability | Easily biodegradable |
| Bioaccumulative potential | No further relevant information available. |
| Ecological information | Do not allow product to reach ground water, water course or sewage system |
| Other adverse effects | No further relevant information available. |
| RCRA hazardous waste | Note Applicable |
| Diaposal Condition | Refer to local government authority for disposal recommendations. Dispose of contents/container in accordance with local/regional/national/international regulations. |
| Road and Rail Transport | Not classified as a Dangerous Good under NZS 5433:2012 Transport of Dangerous Goods on Land. |
| Marine Transport | Not classified as Dangerous Goods by the criteria of the International Maritime Dangerous Goods Code (IMDG Code) for transport by sea; NON-DANGEROUS GOODS. |
| Air Transport | Not classified as Dangerous Goods by the criteria of the International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air; NON-DANGEROUS GOODS. |
| Proper Shipping Name | Chemical Testing Kit |
| Subclass 6.1 Category E | Substances which are acutely toxic. |
| Subclass 6.3 Category A | Substances that are irritating to the skin. |
| Subclass 8.3 Category A | Substances that are corrosive to ocular tissue. |
| Hazard Statement | |
| H303 | May be harmful if swallowed. |
| H315 | Causes skin irritation. |
| H318 | Causes serious eye damage. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Alkalinity Test Kit p-m Total alkalinity kit manufacturer and supplier in Mumbai, Navi Mumbai MIDC, Kandla Gandhidham, Surat, Muscat Sohar Oman, Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Diera, Kolkata, Haldia, Paradip, Viskhapatnam, Chennai, Ennore, Kakinada, Manglore, Goa, Sikka - Jamnagar, Mundra, Gujrat GIDC
