Your shopping cart is empty.
Product Code: RXSOL-30-1077-001
| Product Properties | ||
| Appearance | Clear Colourless Liquid | Vapor Density : Heavier than air |
| Flash Point |
63°C (Closed Cup) |
Stability : Very stable understandard,.normalconditions |
| Compatibility | ||
|
Metal
Plastic |
No known effect |
Note: After use the product must always be well sealed in the drum. |
| Packaging | Order No | Size (in kgs./lts.) |
|
RXSOL-16-1077-025 |
7/25 Lts |
Product Code: RXSOL-30-1077-006
RXSOL-16-1077-020 must be used in open or sufficiently ventilated areas. RXSOL-16-1077-020 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1077-020. Never use RXSOL-16-1077-020 on a running generator or motor. RXSOL-16-1077-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
Product Code: RXSOL-30-1077-005
Spray cans for spot cleaning
Bulk liquid for immersion or ultrasonic cleaning
Wipes (for field or portable use)
Excellent Cleaner for Electric Parts Having super Degreasing power with slow evaporation rate
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates slow evaporation rate and resulting for Cleaning and Degreasing of electrical equipment.It provides immediate and efficient removal with a mideum evaporation rate.
Product Code: RXSOL-43-4020-032
|
Appearance |
Colourless |
|
Odour |
Odourless |
|
pH |
11-12 approx |
| Boiling Point / Boiling Range |
Not determined |
|
Melting Point/Melting Range |
N/A |
| Flash Point | N/A |
| Flammability | Non flammable |
| Autoflammability | N/A |
| Explosive Properties | N/A |
| Oxidising Properties | N/A |
| Vapour Pressure | Not determined |
| Relative Density | 1.18 approx |
| Solubility in water | Miscible |
| Solubility in other solvents | Not determined |
| Partition coefficient and N-octanol/water | ---------- |
| Other Data | None |
The disadvantages of not treating the closed circuit water can be equally troubling for the system operator:-
1. Leakage in PHE and AHU due to corrosion
2. Plugging and clogging of tubes and reduced flow rate
3. REduced heat transfer
4. Need of regular descalling that incurs shutdowns, loss of labor and time
5. Fouling of brine of chiller water
Chemical tratment removes dissolved oxygen that cause oxidation of metal to metal oxide i.e., Iron + Oxygen = Iron Oxide (Rust)
The chemical also contains a specific inhibitor to protect copper from corrosion and removes/prevents any sort of scale formation in the system.
Product Code: RXSOL-43-4018-028
Molybdate-Phosphate for Closed Circulation Machinery Cooling Corrosion inhibitor.
|
Appearance |
Clear Colourless to Pale Liquid |
|
Boiling point [oC] |
100 |
|
C Density [kg/m3] |
1.12 - 1.20 |
|
Flashpoint[oC] TCC |
NONE Vapour pressure [mm Hg] |
|
Pour point [oC] |
NONE Vapour density [a ir=1]: |
| Auto-ignition temp [oC] | NONE |
| Expl.omr. [vol%] Solubility in water [w-%]: | 100% |
| pH : | Slight Alkaline |
| Solubility | 100% in Distilled water |
| Rel. evaporation Rate. | N/A |
| Recommend Dosage ppm LEVEL | 400 to 1000 ppm |
| Soluble in organic solvent: | None |
Use proper chemical protective hand gloves and Eye Goggles.
Corrosion inhibitor closed cooling systems Molybdate Phosphonate is very effective in high hardness, highly alkaline scaling waters. It contains a proprietary blend of organic and polymeric sequestrants, penetrants and dispersants to minimize system fouling from contaminants such as calcium, silica, iron, sludge and organics. It also contains a unique blend of organic and actives to corrosion sites. Corrosion inhibitor closed cooling systems Molybdate Phosphonate is very effective also in low hardness, low alkalinity corrosive waters. It contains special filming ingredients to establish protective barriers against corrosion on ferrous metal surfaces. It also contains special filming ingredients to establish a protective barrier against corrosion and pitting on both yellow metal and ferrous metal surfaces.
Corrosion inhibitor closed cooling systems Molybdate Phosphonate is environmentally safe for discharge with the cooling system bleedoff. The formulation contains no heavy metals, chromates, or other pollutants requiring removal or treatment prior to discharge at normal usage rates.
Molybdate does not provide a nutrient source as do many other corrosion inhibitors. This eliminates a food source for algae and bacteria in the water system and makes control of microorganisms easier at lower microbiocide dosage rates. Corrosion inhibitor closed cooling systems Molybdate Phosphonate may be used alone as a single product for control of corrosion in systems where hardness and alkalinity does not pose a scaling problem, or in high hardness and/or high alkalinity waters where higher cycles of concentration and lower bleed rates are desired. Corrosion inhibitor closed cooling systems Molybdate Phosphonate offers superior corrosion protection for all metals typically found in cooling water systems. The blend of cathodic and anodic inhibitors provides a durable corrosion inhibitive film for maximum system protection and minimal corrosion rates.
Product Code: RXSOL-62-5507-003
Product Code: RXSOL-42-4029-035
| Property | Value |
|---|---|
| Appearance | Clear to slightly hazy amber liquid |
| Odor | Mild characteristic |
| pH (as supplied) | Alkaline |
| Specific Gravity @ 25°C | 1.10 – 1.20 |
| Solubility | Fully water soluble |
| Freeze Point | Below 0°C |
| Shelf Life | 12 months (sealed container) |
Product Code: RXSOL-19-3760-025
|
ITEM |
: |
per CHLORO ETHYLENE , Cl2C:CCl2 |
|
DATE OF SUPPLY |
: |
12.6.2025 |
SPECIFICATION OF PRODUCT |
|
|
|
CAS No. |
: |
127-18-4 |
|
Density |
: |
1.625 |
|
B.P. |
: |
121 OC |
|
IDENTITY |
: |
By IR spectrum |
|
WATER CONTENT, WT. % MAX |
: |
0.03 % |
|
APPEARANCE |
: |
CLEAR COLOURLESS LIQUID |
|
NON VOLATILE MATTER |
: |
0.002% |
|
SULPHURCOMPOUNDS ( as S ) |
: |
0.003 % |
|
ORGANIC IMPURITIES |
: |
PASSES ACID WASH TEST |
|
PHASE |
: |
LIQUID |
|
TLV |
: |
50 ppm in air |
|
PROPERTIES |
: |
Miscible with alcohol , ether , and oils ; insoluble in water . Nonflammable. |
Perchloroethylene is used in aerosol formulations for the automotive aftermarket, particularly for brake cleaning, as well as water repellents for garments, spot removers and silicone lubricants. It can be used as an insulating fluid in some electrical transformers as a substitute for polychlorinated biphenyls (PCBs).
Product Code: RXSOL-19-3760-300
Chemical Name: Tetrachloroethylene
Formula: C₂Cl₄
Type: Non-flammable, chlorinated solvent
Appearance: Colorless liquid with a sweet, ether-like odor
Toxic if inhaled in large amounts or over time (linked to liver, kidney, and nervous system effects)
Classified as a possible human carcinogen
Requires well-ventilated, sealed systems and PPE for operators
Strictly regulated in many countries (e.g., banned or phased out in California, EU restrictions)
Hydrocarbon solvents (less aggressive, more eco-friendly)
Liquid CO₂ cleaning
Siloxane-based solvents (e.g., GreenEarth®)
Professional wet cleaning (water-based with special machines and detergents)
Perchloroethylene remains effective but is increasingly being replaced due to safety and environmental concerns. Dry cleaners using PERC must comply with strict safety protocols and environmental regulations.
Product Code: RXSOL-15-2658-005
Product Code: RXSOL-43-4035-220
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
Product Code: RXSOL-39-1668-005
| Appearance | Clear, Slight Yellow |
| Odor | Fresh |
| pH | Alkaline |
| Sp. Gravity | >1.15 |
