Products Grid | Page 42 | Marine Chemicals,Tank Cleaning Chemicals,Water Chemicals Products,Cooling Water Treatment Chemicals

Product Short Description: Extremely suitable oxygen scavenger for low and medium pressure boilers.

Product Technical Specification:

Solubility (10 % Aquous Soln)	V. S. Hazy to clear solution.
pH Value of 5% Solution	3.5 to 4.5
Specific Gravity @ 25° C	1.310 – 1.370
Density, lbs/gal @ 25° C	10.9 - 11.3
Description	Oxygen Scavenger for Boiler
Standard Packing	30 Kg / 50 Kg. / 250 kg HM HDPE Barrel

Remarks:

The most common oxygen scavengers in oilfield production are sodium bisulfite (SBS) and ammonium bisulfite (ABS). Ammonium bisulfite is more water soluble than sodium bisulfite and typically react with oxygen faster. However, ammonium in the ammonium bisulfite can promote bacteria growth.

Being a salt of a weak acid and a strong base, sodium bisulfite forms a significantly basic aqueous solution whereas ammonium bisulfite is only slightly basic at around pH 8. As a rule of thumb, 60ppm of 65wt% ammonium bisulfite is required to reduce the oxygen concentration in water from 9ppm to 50ppb.

The reaction of bisulfite with oxygen is typically faster at higher temperatures and can be facilitated by transition metal ion catalysts, e.g. Cobalt.

The most common applications of oxygen scavenger in oil and gas production are for seawater injection facilities, hydro-testing, and acid stimulation

It is used to arrest oxygen in sea water

It removes Entrapped Oxygen and thus reduces Corrosion

In Oil Drilling Chemicals

Images:

Boat Cleaner

Product Short Description: Safe for use on fiberglass, Metal and Painted surface.

Product Technical Specification:

RXSOL Boat Hull Cleaner strength resulting one step cleaning either its Gel Formula can be brush on or its liquid formula can be sprayed off on the entire boat or Hull area to remove sea growth and lime deposits. Its balance acidic formula immediately starts its function and Safe on aluminium boats and pontoons; Biodegradable, Non-flammable.

Remarks:

Images:

SEA CLEANER

Product Short Description: Marine Chemicals Specially formulated for cleaning of tank bottom, deep and wing tanks etc, used for fuel oils. And also very useful product for local cleaning and degreasing of engine rooms and on deck.

Product Technical Specification:

RXSOL-20-2002-025 HEAVY OIL CLEANER - SEA CLEANING product is an extremely effective liquid blend of concentrated emulsifier with penetrating agents, mild abrasives and wetting agents which makes this an excellent liquid scouring cleansers for cleaning and degreasing of double bottom, deep tanks etc which is used for fuel oils It can also be used for BOILERS, MARINE DIESEL ENGINE COOLING WATER SYSTEM and for local cleaning and degreasing of engine rooms on deck.

Remarks:

Use Handgloves, Goggles and safety mask before using in Tank. Keep container tightly closed and away from direct heat, fire and sunlight.

Images:

Activated Methyl Diethanolamine MDEA

Product Short Description: A colorless to yellow liquid tertiary amine compound with an ammonia-like odor. It is completely soluble in water.

Product Technical Specification:

Property	Value
Property	Value
Physical state	Liquid
Color	Colorless
Odor	Ammonia-like
Density	1.04 g/cm @ 20°C
Melting / boiling point	-21.3 / 243.3 °C
Explosive properties	No data available
Self-ignition temperature	280 °C
Vapor pressure	0.1 hPa @ 54.8°C
Mol weight	119.16 g/mol
Water solubility	Soluble
Flash point	138°C


Molecular Formula	C5H13NO2
Molecular Weight	119.16 g/mol
Autoignition Temperature	280 °C
Critical Pressure	37 000 hPa
Critical Temperature	404 °C
Dissociation constant	25°C 8.68
Freezing Point	21.3 °C
Heat Capacity	20°C 1.72 kJ/kg·K
Heat of Formation	91 649 kJ/kmol
Heat of Vaporization	418.7 kJ/kg
Octanol-water partition coefficient, log Pow (pH 10.5; at 23°C)	1.16
Refractive Index	20°C 1.4642
Vapor Density	(air = 1) 4
Vapor Pressure	20°C 0.0031 hPa
Viscosity	20°C 99.05 mm2

Remarks:

Future & Benefit :

Degradation resistance
High solvent loading
Low capex and opex
Low corrosiveness
Low energy requirements
Low solvent make-up Selectivity

Compatibility and Solubility:

Methyl Diethanolamine is miscible in all proportions with water. It is also soluble in most organic solvents. Chemically it acts as both a tertiary amine and an alcohol. Neutralisation of the amino function by acids results in salt formation. The product is stable at elevated temperatures but must be kept away from oxidants and acids.

Amine Gas Treatment Unit system simulation:

Based upon feed gas conditions, the installation design and type of amine, unit performance can be predicted and optimized. The simulation output and reporting are tailored towards your needs and focus on the issues at hand. These simulations combined with our application experience allow us to provide you with feedback on how to improve the amine gas treatment unit operations (financial, operational and quality) and to tailor our amine formulations to maximize performance, such as energy reduction and reduced amine consumption.

Technical support:

Technical support is provided to all RXSOL users. Our experienced team of engineers is available around the clock to respond to your questions. On-site troubleshooting by an experienced engineer can also be arranged. Rxsol Chemo Pharma International can assist you with root cause analysis and operational recommendations for issues such as off- spec treated gas, foaming, high amine losses, high energy consumption, under capacity, corrosion etc.

Amine analysis:

Detailed chemical analysis of your amine solution is a key tool to determine the overall quality of the system and identify the root cause for problems such as foaming, corrosion, off spec product etc.RXSOL’s lab, highly experienced in amine analysis and interpretation, is at your disposal. Analysis of lean amine samples includes (a.o): sample appearance, physical-chemical properties, determination of free and bonded amine, acid gas loading foam test, metal scan etc. The results of the analysis are interpreted by our specialist team and the necessary recommendations are provided. The frequency, content and reporting of the analyses is customized towards your needs. Full results are typically available within 7 working days after receipt of the samples.

Sample kits :

Sample shipping kits and detailed analytical procedures are available to our customers upon request.

Packaging

Bulk
Plastic drums (230 kg net)
IBC containers (1150 kg net)

Storage:

Copper and copper alloys should be avoided.For bulk storage a nitrogen atmosphere is necessary to prevent the absorption of moisture and discoloration.

Images:

Search form

Oxygen Scavenger Boiler Oxy Control

TRI ETHYLENE TETRAMINE

Boat Cleaner

Erlenmeyer flask 500 ml

Peracetic Acid Test Strips 0 to 160 ppm

N HEXANE

SEA CLEANER

BIOMATE RO

Chemical Absorbent Spill Kit 120 Ltr

Potassium Hypochlorite

Silica Gel White Desiccant

Activated Methyl Diethanolamine MDEA

HAVE A QUESTION?

Ask a question - WebForm Inline

LiveChat