Your shopping cart is empty.
Product Code: RXSOL-94-6014-400
SPECIFICATION FOR ETHYLENE ABSORBER:
| Loss on drying : | Not more that 5% mass |
| Absorption Capacity : | 27% min on the basis of mass |
| PH : | 3.5 to 8. |
| Chlorides : | 0.05% by mass max |
| Cobalt (as CoCl2) : | 0.4 by mass max |
| Ammonium compounds (as NaH3): | 0.5% by mass max |
| Sulphates (Na2SO4) : | 0.5% by mass max |
| Packing: |
25 / 50 kgs M S drum (Smaller packing available). |
Product Code: RXSOL-94-9453-006
Glyphocide Herbicide is absorbed through foliage, and minimally through roots, and transported to growing points. It inhibits a plant enzyme involved in the synthesis of three aromatic amino acids: tyrosine, tryptophan, and phenylalanine. It is therefore effective only on actively growing plants and is not effective as a pre-emergence herbicide.
Product Code: RXSOL-19-3356-096
Product Code: RXSOL-19-3356-047
Product Code: RXSOL-94-9451-005
Product Code: RXSOL-14-5005-554
Basic Boiler System Schematic
Below is a summary of problems associated with the common impurities in water and solutions to each problem.
List Of Problems Caused By Impurities In Water
|
Impurity (Chemical Formula) |
Problems |
Common Chemical Treatment Methods |
|
Alkalinity (HCO3-, CO32- and CaCO3) |
Carryover of feedwater into steam, produce CO2 in steam leading to formation of carbonic acid (acid attack) |
Neutralizing amines, filming amines, combination of both, and lime-soda. |
|
Hardness (calcium and magnesium salts, CaCO3) |
Primary source of scale in heat exchange equipment |
Lime softening, phosphate, chelates and polymers |
|
Iron (Fe3+ and Fe2+) |
Causes boiler and water line deposits |
Phosphate, chelates and polymers |
|
Oxygen (O2) |
Corrosion of water lines, boiler, return lines, heat exchanger equipments, etc. (oxygen attack) |
Oxygen scavengers, filming amines and deaeration |
|
pH |
Corrosion occurs when pH drops below 8.5 |
pH can be lowered by addition of acids and increased by addition of alkalies |
|
Hydrogen Sulfide (H2S) |
Corrosion |
Chlorination |
|
Silica (SiO2) |
Scale in boilers and cooling water systems |
Lime softening |
Product Code: RXSOL-25-5006-025
The use of Disodium phosphate treatment in BOILER converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown.
Sampling And Testing
A sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Follow the Rxsol Hardness Test Kit instructions and fill the Boiler Water Log Form according to result results. It is important that regular testing is carried out to ensure levels of treatment are correct.
Physical Properties :
Appearance :White powder
Corrosive action :NonE
pH 1% solution :8.8
Flash point :None
Phosphate/pH relationship recommended to control boiler corrosion. Different forms of phosphate consume or add caustic as the phosphate shifts to the proper form. For example, addition of monosodium phosphate consumes caustic as it reacts with caustic to form disodium phosphate in the boiler water according to the following reaction:
| NaH2PO4 | + | NaOH | ® | Na2HPO4 | + | H2O |
| monosodium phosphate | sodium hydroxide | disodium phosphate | water |
Conversely, addition of trisodium phosphate adds caustic, increasing boiler water pH:
| Na3PO4 | + | H2O | ® | Na2HPO4 | + | NaOH |
| trisodium phosphate | water | disodium phosphate |
sodium hydroxide |
Product Code: RXSOL-37-3203-050
| Physical State | Powder |
| Appearance | White |
| ARSENIC Content | 0.005 %wt Max. |
| METHYL ORANGE ALKALINITY (AS NaNO2) | 8.2-8.9 %wt |
| IRON Content | 0.05 %wt Max. |
| PHOSPHOROUS PENTOXIDE | 19.45 %wt Min |
| Composition Purity | 98.0 % wt ( Minimum ) |
| Decomposition Temperature | Not available |
| SolubilityCompletely | Soluble in water. |
| Insolubility Content in Water | 0.1 % wt |
| MaxMolecular Formula | NA2HPO4.12H2O |
| Molecular Weight | 141.96 |
| Density | 500 kg / M3 |
We also keeping other grades of Phosphate Chemicals and Formate Chemicals. Our product range covers high-quality products and most competitive price,
(1)Phosphate chemicals:
Red phosphorus
Malic acid
Phosphoric Acid 75%,85% food grade
Polyphosphoric Acid 105%,115%
Phosphorus acid 98.5%,99%
Sodium Acid Pyrophosphate
Sodium Hexameta Phosphate
Sodium Tripoly Phosphate
Trisodium Phosphate
Tetra-sodium Pyrophosphate
Monoammonium Phosphate
Diammonium Phosphate
Monopotassium Phosphate
Phosphorus pentoxide
Phosphorus trichloride
Glyphosate
Ferro Phosphorus
(2)Formate chemicals:
Product Code: RXSOL-43-4095-025
Technical Specification:
| Classification | Chemical Auxiliary Agent RXSOL-43-4095-025 Coagulant for Cooling Water System |
| CAS No | 1327-41-9 |
| Purity | 30% |
| Type | Water treatment chemical |
| Usage | Paper Chemicals, Water Treatment Chemicals |
| Brand Name | RXSOL |
| Model Number | PAC |
| white | Powder |
Packaging & Shipping
RXSOL-43-4095-025 Coagulant for Cooling Water System Packing:
25kg/polypropylene woven bags with inner plastic bag, 25kg/PE bag
Product Code: RXSOL-43-8160-210
Product Code: RXSOL-43-4162-250
Product Code: RXSOL-42-1977-125
