Buffer Cleaner
Oman Chemical is leading one Largest Supplier, Manufacture a
Technical Specifcation / Typical Properties
Form | Solid |
Colour | Black |
Particle Shape | Amorphous |
Carbon Content, % | 97.0 |
Average Particle Size, | 0.005 µ |
Specific Surface Area (m²/g) | 44.00 |
Oil Absorption, (g/100g) | 134 |
+325 Mesh Retention, % | 0.004 |
pH | 9 |
Water Soluble Salts, % | 0.20 |
H2O |
0.50 |
Ash% | 0.60% |
Toulene Discoloration Transmission, % | 80.00 |
Specific Gravity | 1.79 |
Physical properties
Colour | Light grey |
Solids (vol %)* | 100 ± |
Flash point | None-flamable |
Specific Gravity | 2,3 kg/ltr |
DISCLAIMER
The information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product can be used under conditions beyond our control, we can only guarantee the quality of the product itself. We also reserve the right to change the given data without notice. Minor product variations may be implemented in order to comply with local requirements.
Rx Marine International is a World Wide company with factories, sales offices and ware house in all the ports of india and UAE . please visit our website at www.rxmarine.com.com
PRODUCT PROPERTIES APPEARANCE
Clear Colourless Liquid DENSITY In g/cm3 at 20°C: 1.
2 COMPATIBILITY METAL ::: No known effect RUBBER May Swell
CHARACTERISTIC :- Easy to apply & simple to control. Exhibits excellent ;paints thinning properties. 100% active matter. Dries completely. Protects all common metals from corrosive attack. Reduce down time & maintenances costs. Can be used on all metals & most painted surface to remove paints. GENERAL REMARKS :-Do not store RXSOL-18-1014-210 near heating equipment.
FIRSTAID &STORAGE :- Contact with skin can cause serous chemicals burns .Avoid contact with skin & eyes.Wear PVC gloves while handling.
Do not take internally. Splashes of the product or its solutions on the skin or clothing should washed immediately with cupious amount of water . If the eyes are affected should be washed with water for at least 15 minutes and seek medicals attention sought immediately. Keep drums tightly closed when not in use.
Appearance: |
A thin black liquid, with a strong solvent odor |
Solids Content: |
Above 35% |
Dangerous Goods Class: |
3 |
Poisons Schedule Number: |
5 |
Property | Unit | Method | Value |
Density @15°C | kg/l | ASTM D4052 | 0.785 |
Cubic Expansion Coefficient @20°C | (10^-4)/°C | Calculated | 9 |
Refractive Index @20°C | - | ASTM D1218 | 1.437 |
Color | Saybolt | ASTM D156 | + 30 |
Bromine Index | mg Br/100g | ASTM D2710 | 200 |
Copper Corrosion (3hr @100°C) | ASTM D 130 | 1 | |
Doctor Test | D 235 | Negative | |
Non Volatile Matter | mg/100ml | ASTM D1353 | 1 |
Distillation, IBP | °C | ASTM D86 | 182 |
Distillation, EP | °C | ASTM D86 | 206 |
Relative Evaporation Rate (nBuAc=1) | ASTM D3539 | 0.05 | |
Relative Evaporation Rate (Ether=1) | DIN 53170 | 200 | |
Antoine Constant A # | kPa, °C | 6.14569 | |
Antoine Constant B # | kPa, °C | 1636.33 | |
Antoine Constant C # | kPa, °C | 200.436 | |
Antoine Constants: Temperature range | °C | +50 to +175 | |
Vapor Pressure @20°C | kPa | Calculated | 0.05 |
Saturated Vapor Concentration @20°C | g/m³ | Calculated | 3 |
Paraffins | % m/m | GC | 47 |
Naphthenes | % m/m | GC | 40 |
Aromatics | %v/v | ASTM D1319 | 12 |
Benzene | mg/kg | GC | < 3 |
Sulfur | mg/kg | SMS 1897 | < 0.5 |
Flash Point | °C | ASTM D93 | 64 |
Auto Ignition Temperature | °C | ASTM E659 | 281 |
Explosion Limit: Lower | %v/v | - | 0.7 |
Electrical Conductivity @20°C | pS/m | - | < 1 |
Pour Point | °C | ASTM D97 | <-30 |
Surface Tension @20°C | mN/m | Du Nouy ring | 26 |
Viscosity @25°C | mm²/s | ASTM D445 | 1.5 |
Hildebrand Solubility Parameter | (cal/cm³)^½ | 7.7 | |
Hydrogen Bonding Index | 0.5 | ||
Fractional Polarity | 0 | ||
Heat of Vaporization @Tboil | kJ/kg | 270 | |
Heat of Combustion (Net) @25°C | kJ/kg | 44500 | |
Specific Heat @20°C | kJ/kg/°C | 2.0 | |
Thermal Conductivity @20°C | W/m/°C | 0.14 | |
Molecular Weight | g/mol | Calculated | 158 |
For quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through other. Rxsol H does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.
Storage : Store Cool and Dry Palce. Keep Far away from direct flame.