RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Test Kit For Water

Barium Chloride Solution, 10% Neutralized

RXSOL brand highly purified and well balanced Barium Chloride 10% solution chemically plays role during Sulfate Test, to pricipitate as Barium Sulfate crystal of uniform size.
Part number
RXSOL-60-6263-250
Brand
RXSOL
Barium Chloride Solution, 10% Neutralized

Overview

RXSOL brand highly purified and well balanced Barium Chloride 10% solution chemically plays role during Sulfate Test, to pricipitate as Barium Sulfate crystal of uniform size. 

Other Higher Concentration Product ::: Barium Chloride saturated Solution

Testing method of sulfite with barium chloride is based on the precipitation of sulfate ion in a hydrochloric acid medium with barium chloride in such a manner as to form barium sulfate crystals of uniform size.  The glycerol sulfate solution is used to maintain proper crystal size, and control of the stirring and waiting times is necessary to obtain reproducible result.  The resultant turbidity is measured at a wavelength sensitive to turbidity on a photometer.  The blank serves to partially cancel out interferences due to color and suspended matter. 

Click here for Testing Procedure  ::: rxmarine.com/SULFATE-TEST-KIT

Applications

Water Testing Procedures Manual ( Full Range Lab testing   Methods with standard  composition ratio Of Reagents  ::: Available with us  at 2700 INR or 54 US$ or 207 AED

Dosage and directions

Apparatus Required :::  Filter photometer complete with assorted laboratory glassware. 

Chemicals Required

Glycerol Sulfate Solution
Barium Chloride (Natural )  Solution
Sulfate Standard

Procedure of Test


This procedure uses a wavelength of 420 nm and a cell with a light path of approximately 10-mm. First prepare a calibration curve for the photometer using successive dilutions of the sulfate standard to adequately cover the range of sulfate in the samples to be tested.  The dilutions of the standard should be treated in exactly the same manner as that shown below for analysis of the water samples.  Using a 50-ml plastic graduate, add 50 ml of sample to a 125-ml glass flask. Pipet 10 ml of glycerol sulfate solution into the flask and swirl the solution. Pipet 5 ml of distilled water into the flask, swirl the solution and use this solution to set the photometer at zero absorbance. Discard the solution and rinse the flask with distilled water. Into a second 50-ml sample, pipet 10 ml of glycerol sulfate solution and swirl. Adjust the temperature of the sample to 70 to 75F, and pipet 5 ml of neutral barium chloride solution into the same flask. Stir the solution by rotating a rubber paddle between the palms at moderate speed for exactly five seconds. Wait exactly five minutes, and then measure the absorbance on the photometer. 

Calculation of Results  The sulfate concentration in parts per million as SO4  is obtained by reference to the prepared sulfate calibration curve. 

Limitations of Test 

Color or large amounts of suspended matter will interfere with this method,  but some suspended matter may be removed by filtration. Also the presence of color and suspended matter is compensated for to some extent by the blank determination. Silica in excess of 500 ppm will interfere, and in samples containing large amounts of organic material, it may not be possible to precipitate barium sulfate satisfactorily.  

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name Barium Chloride Solution, 10% Neutralized
Product Type RXSOL-60-6263-250

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA 

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
SARA 313 Component  CAS Number Percent Comp. Dimension
 
Exposure
 Limits
 
Barium Chloride CAS# 10326-27-9

 10%

W/V OSHA PEL0.89 mg/mƒ
Water, Deionized ASTM Type II CAS# 7732-18-5 90% V/V None Established

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

Emergency Overview: Danger! May Be Fatal If Swallowed. Harmful If Inhaled. May Cause Irritation To Skin, Eyes, And Respiratory Tract. Affects Heart, Respiratory System, And Central Nervous System.

Inhalation: Irritates the Respiratory Tract. May Produce Sore Throat, Coughing and Labored Breathing. Other Symptoms may Parallel Ingestion.

Ingestion: Toxic! May Cause Sever Gastroenteritis, Including Abdominal Pain, Vomiting and Diarrhea. May Cause Tremors, Faintness, Paralysis of Arms and Legs, and Slow or Irregular Heartbeat. Severe Cases may Produce Collapse and Death on Respiratory Failure. Estimated Lethal Dose in Humans: 1 gram of Barium Chloride.

Skin: May Cause Irritation with Redness and Pain.

Eye Contact: May Cause Irritation, Redness, Pain, or Blurred Vision.

Chronic Exposure: No Information Found.

Aggravated by Exposure: Persons with Pre-Existing Skin Disorders or Impaired Respiratory Function may be More Susceptible to the Effects of the Substance.

 

May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts.Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.

SKIN:

Remove contaminated clothing. Wash exposed area with soap and water. if irritation persists, seek medical attention.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.
INGESTION: Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person.

Fire Extinguisher Type:

Any means suitable for extinguishing surrounding fire
Fire / Explosion Hazards: None
Fire Fighting Procedure: Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing.

Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.

Ventilate area or Leak or Spill. Remove all Sources of Ignition.Wear Appropriate Personal Protective Equipment as Specified in Section 8. Isolate Hazard Area. Keep Unnecessary and Unprotected Personnel from Entering. Contain and Recover Liquid when Possible. Absorb with an Inert Material (e.g., Vermiculite, Dry Sand, Earth), and Place in a Chemical Waste Container.Do Not Use Combustible Materials, such as Saw Dust. Do Not Flush to Sewer!

Wash thoroughly after handling. Store in a cool dry ventilated storage area. Keep out of direct sunlight
and away from heat, water and incompatible materials. Remove contaminated clothes and wash before reuse. Use with adequate ventilation..

Respiratory Protection

None required
Ventilation  Local
OTHER Mechanical
Protective Gloves Gloves to prevent skin exposure as rubber or vinyl
EYE PROTECTION Splash Goggles
Other Protective Equipment Use safe laboratory handling procedures.
BOILING POINT ~0° C (32° F)
VAPOR PRESSURE  Information not available
MELTING POINT ~100° C(212° F)
VAPOR DENSITY  Information not available
EVAPORATION RATE Information not available
Appearance /Odors Clear liquid,odorless
Flash Point Information not available
Specific Gravity 1.0 - 1.092
Percent Volatile by 90%
Evaporation Standard  
Auto Ignition Temp

Not applicable

Lower Flamm. Limit in Air Not applicable
Upper Flamm. Limit in Air  Not applicable
Solubility in Water Soluble

STABILITY

Stable

CONDITIONS TO AVOID

Keep away from intese heat

MATERIALS TO AVOID

Bromine trifluoride; 2-furan percaboxylic acid

HAZARDOUS DECOMPOSITION PRODUCTS

Barium Compounds

HAZARDOUS POLYMERIZATION

will not occur
Conditions to Avoid  None known

Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None

Environmental Fate: This Material is Expected to Significantly Bioaccumulate.

Environmental Toxicity: No information found.

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements

DOT Classification: UN3287, Toxic Liquid, Inorganic, n.o.s.(Barium Chloride), 6.1, PG III

DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations

Chemical Inventory Status –
Part 1:Ingrdient
Barium Chloride (10361-37-2)
TSCA Yes
EC Yes
Japan YES
Australia Yes

Chemical Inventory Status –
Part 2:Ingredient
Barium Chloride (10361-37-2)
Korea Yes
DSL Yes
NDSL No
Phil. Yes

Federal, State & International Regulations –
Part 1: Ingredient.
Barium Chloride (10361-37-2)
RQ No
TPQ No
List NO
Chemical Catg BARIUM COMPO

Federal, State &
International Regulations –
Part 2:Ingredient
Barium Chloride (10361-37-2)
CERCLA NO
261.33 No
8(d) No
Chemical Weapons Convention: No
TSCA 12 (b):No
CDTA:No PURE/SOLID
SARA 311/312: Acute:YES
Chronic: No
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: 2Z
Poison Schedule:S6

Toxic by ingestion. Ingestion may cause severe abdominal pain,violent purging with bloody stool, confusion, paralysis, First aid:have victim drink one tablespoon of epsom salts dissolved in water.If victim is not vomiting, induce using syrup of ipecac, or stick finger down throat. For eye contact, flush with plenty of water for 15 minutes, seek medical aid. Estimated lethal dose in humans:1                                                                             Flammability
 

Health                                                                                                     Reactivity

Revisions
 

  NFPA
 
7/30/2010 0.1 updated msds to 16 section from 10 section msds. STN
   0

The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Barium Chloride Solution, 10% Neutralized manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Barium Chloride Solution, 10% Neutralized at a competitive price from us. We have ready stock of Barium Chloride Solution, 10% Neutralized in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches