Hardness Indicator Powder Calmagite
- Part number
- RXSOL-60-6234-100
- Category
- Test Kit For Water
- Brand
- RXSOL
Overview
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Hardness Indicator Powder |
| Product Type | RXSOL-60-6234-100 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Hardness Indicator Powder |
100% |
W/W |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
Physical state: Black Powder
Odor: None
OSHA/HCS status: This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Emergency Overview:May cause irritation to the skin. May cause moderate irritation to the eyes. Dusts may causeirritation to the upper respiratory tract. DOT hazard is not applicable
Inhalation: Dusts may cause irritation to the upper respiratory tract.
Ingestion: May cause slight gastrointestinal irritation.
Skin: May cause slight irritation to the skin.
Eyes: May cause moderate irritation to the eyes.
Chronic Exposure:No Information Found.
Aggravated by Exposure:No Information Found.
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts.Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: |
Get medical attention immediately. Wash out mouth with water. Move exposed person to fresh air. If exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. |
|
Fire Extinguisher Type: |
dry chemical, carbon dioxide, foam or water. |
| Fire / Explosion Hazards: | |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
| Hazardous decomposition products: | Oxides of carbon,nitrogen and sulfur. |
Sweep up and place in suitable (fiberboard) containers for reclamation or later disposal.
Ventilate Area of Leak or Spill. Wear Appropriate Personal Protective Equipment as Specified in
Section 8. Spills: Sweep up and Containerize for Reclamation or Disposal. Vacuuming or Wet
Sweeping may be Used to Avoid Dust Dispersal. Wet Area may be Slippery. Spread Sand / Grit. Water Contaminated with this Product may be Sent to a Sanitary Sewer Treatment Facility, in Accordance with any Local Agreement, a Permitted Waster Treatmenst Facility or Discharged Under a Permit. Product as is - Incinerate or Land Dispose in an Approved Landfill.
Store in a cool dry place. This Material is not considered hazardous. Handle using safe laboratory practices
|
Respiratory Protection |
None required |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | Mechanical NIOSH Approved Gloves |
| EYE PROTECTION | Splash Goggles |
| Other Protective Equipment |
Use safe laboratory handling procedures. Engineering measurers: Use only with adequate ventilation. Personal Protection: Use protective equipment in accordance with 29CFR 1910 subpart I. Eye protection: Chemical goggles Respiratory protection: A respiratory protection program that meets OSHA’S 29 CFR 1910.134 and ANSI Z88.2 requirements must be followed whenever use air purifying respirators within use limitations associated with the equipment or else use supplied air respirators. If air-purifying respirator use is appropriate, use any of the following particulate respirators: N95, N99, N100, R95, R99, R100, P95, P99 or P100. Hand protection: Rubber, butyl, viton or neoprene gloves - wash off after each use. Replace as necessary |
| BOILING POINT | information not available |
| VAPOR PRESSURE | 1 mm Hg @865° C |
| MELTING POINT | information not available |
| VAPOR DENSITY | not available |
| EVAPORATION RATE | <1.00 |
| Appearance /Odors | Black powder / no odor |
| Flash Point | > 200 deg F |
| Specific Gravity | information not available |
| Percent Volatile by |
Not applicable |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air | Not applicable |
| Upper Flamm. Limit in Air | Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
None known |
|
MATERIALS TO AVOID |
may react with strong oxides |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
oxides of carbon, nitrogen and sulfur. |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
Test Result Route Species
LD50 >2,000 mg/kg Oral Rat
LD50 >2,000 mg/kg Dermal Rabbit
Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None
No Information Found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
DOT Hazard: Not applicable Proper Shipping Name: Not applicable
DOT emergency response guide #: Not applicable
Note: Some containers may be DOT exempt, please check BOL for exact container classification.
Hardness Indicator Powder
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
No Information Found.
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/30/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
| 0 |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Hardness Indicator Powder Calmagite manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Hardness Indicator Powder Calmagite at a competitive price from us. We have ready stock of Hardness Indicator Powder Calmagite in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
