Hardness Indicator Solution (AF Grade)
- Part number
- RXSOL-60-6232-100
- Category
- Test Kit For Water
- Brand
- RXSOL
Overview
Amount of calcium and magnesium present in a water sample is determined. The determination of the hardness of water is important in water treatment plants. RXSOL-60-6232-100 is standarised and caliberated solution of colour indicator, which will help for determination of HARDNESS standard by giving the greatest color change as the end point.
Dosage and directions
Other Valuable Test reagent for HARDNESS :::
Characteristics and notes
Calcium Carbonate Standard Solution making Method :::
Weigh to the nearest 0.1 mg approximately 0.5 g of dry primary standard CaCO3 into a clean, dry 50 mL beaker. Transfer most of the CaCO3 without loss to a dry funnel inserted in the top of a dry 100 mL volumetric flask. Transfer of the last particles is unnecessary. Do not use liquid in this transfer. Weigh the beaker and any remaining calcium carbonate to the nearest 0.1 mg, obtaining the weight of CaCO3 in the flask by difference. Tap the funnel to transfer most of the solid, and then rinse the last particles through the funnel into the flask with a milliliter of 12 M HCl. Add 1 mL more of 12MHCl to each flask by rapid drop wise addition. Warm if necessary to complete the dissolution. When dissolution is complete, remove the funnel, rinsing inside and out with demineralized water from a wash bottle as it is being removed. Fill the flask to the mark with demineralized water, stopper, and mix well.
Preparation of EDTA Solution :::
Prepare an approximately 0.015 M EDTA solution by adding 2.5 g of the disodium salt, 10 mL of 1% MgCl2 solution, and 1.5 mL of 6MNH3 to about 450 mL of water. In this experiment use only distilled water purified by passage through a column containing either a cation-exchange resin or a mixture of cation and anion-exchange resins. ( http://rxmarine.com/DemineralisedWater )
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Hardness Indicator Solution (AF Grade) |
| Product Type | RXSOL-60-6232-100 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| 1,2-Propanediol(Propylene Glycol | CAS# 57-55-6 |
30 - 40% |
V/V | |
| Calmagite | CAS# 3147-14-6 | 0.05 -0.5% | W/V | None Established |
| Water, Deionized ASTM Type II | CAS# 7732-18-5 | Balance | V/V | None Established |
Keep away from heat and ignition sources. Harmful if swallowed. Avoid breathing vapors. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container
Emergency Overview:Caution! May Cause Irritation to Skin and Eyes.
Inhalation:No Adverse Health Effects Expected from Inhalation.
Ingestion:Substance has Low Toxicity by Ingestion. Large Amounts May Cause Gastrointestinal Upset due
to Osmotic Imbalance Caused by its ability to Sequester Metal Ions.
Skin:May Cause Irritation with Redness and Pain.
Eye Contact:May Cause Irritation, Redness and Pain.
Chronic Exposure:No Information Found.
Aggravated by Exposure:No Information Found.
Keep away from heat and ignition sources. Harmful if swallowed. Avoid breathing vapors. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally.Seek Medical Aid. |
| INHALATION: | Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen If large amounts are swallowed give water to drink and seek medical aid. |
|
Fire Extinguisher Type: |
Carbon Dioxide, dry chemical powder or appropriate foam |
| Fire / Explosion Hazards: | None Known. |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Absorb spill with inert material, then place in a chemical waste container. Dispose of in a manner consistent with federal, local law.
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8.
Contain and recover liquid when possible. Collect liquid in an appropriate container or absorb with an inert
material (e.g., Vermiculite, Dry Sand, Earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust.
Store in a cool dry place. Do not get in eyes, on skin,or on clothing. Wash thoroughly after handling. Protect from freezing..
|
Respiratory Protection |
None required |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | Wear appropriate gloves to prevent skin exposure |
| EYE PROTECTION | Chemical safety goggles |
| Other Protective Equipment | Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | information not available |
| VAPOR PRESSURE | not available |
| MELTING POINT | information not available |
| VAPOR DENSITY | not available |
| EVAPORATION RATE | information not available |
| Appearance /Odors | clear red liquid / mild |
| Flash Point |
Not applicable |
| Specific Gravity | information not available |
| Percent Volatile by | information not available |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air | Not applicable |
| Upper Flamm. Limit in Air | Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
See Incompatibiliites |
|
MATERIALS TO AVOID |
Acid chlorides, acid anhydrides,oxidizing agents, chlorofromates, and |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
CO, CO2 |
|
HAZARDOUS POLYMERIZATION |
will not occur |
| Conditions to Avoid | None known |
Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None
No information found..
Dilute with water and flush to sewer if local ordinances allow, otherwise whatever cannot be saved for
recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and
local disposal regulation may differ from federal disposal regulations. Dispose of container and unused
contents in accordance with federal, state and local requirements.
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Calmagite (3147-14-6)
Propylene Glycol (57-55-6)
TSCA Yes Yes
EC Yes Yes
Japan No Yes
Australia Yes Yes
Chemical Inventory Status –
Part 2:Ingredient
Calmagite (3147-14-6)
Propylene Glycol (57-55-6)
Korea NO Yes
DSL Yes Yes
NDSL No No
Phil. Yes Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Calmagite (3147-14-6)
Propylene Glycol (57-55-6)
RQ NO No
TPQ NO Yes
List NO No
Chemical Catg No No
Federal, State &
International Regulations –
Part 2:Ingredient
Calmagite (3147-14-6)
Propylene Glycol (57-55-6)
CERCLA NO No
261.33 No No
8(d) No No
Chemical Weapons Convention:No
TSCA 12 (b):No
CDTA:NO
SARA 311/312: Acute: NO
Chronic: NO
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: None
Poison Schedule: None allocated
Effects of overexposure. Acute and chronic: Harmful by inhalation,ingestion, skin absorption. May cause eye and skin irritaition and central nervous system problems. May cause GI disturbances, nausea, headache and vomiting. Target organs: None. Persons with pre-existing disorders may be more susceptible.
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/29/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Hardness Indicator Solution (AF Grade) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Hardness Indicator Solution (AF Grade) at a competitive price from us. We have ready stock of Hardness Indicator Solution (AF Grade) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
