RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,087 products across 101 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Test Kit For Water

Orthotolidine Solution

The Orthotolidine Reagent for Free Chlorine in Water
Part number
RXSOL-62-5528-500
Brand
RXSOL
RXSOL

Overview

The Orthotolidine Reagent for Free Chlorine in Water. ORTHOTOLIDINE is most coomon test Reagent to detect Chlorine during Water distillation, Salts, Hypochlorite, Alkalinity process.

Applications

Orthotolidine used as a qualitative test for detection of minute amounts of free chlorine and hypochlorites.

Dosage and directions

With small amounts of free chlorine, a deep yellow color is produced with the orthotolidine reagent.

During tratment with hypochlorite, a green color appeared which gradually deepened and changed to yellow and finally to deep red as the concentration of free chlorine increased.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

 

Product Name               Orthotolidine Solution
Part Number   RXSOL-62-5528-500

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmraine.comA
Chemical  Name                            CAS                    EC numbe              Weight             Formula                            
Orthotolidine 95-53-4 202-429-0 <= 100 % C7H9N
Signal Word  Danger
Hazard Statements H350 May cause cancer. H301 + H331 Toxic if swallowed or if inhaled.
Precautionary statements   P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor. P304 + P340 + P311 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor.
Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008.
Supplemental Hazard      Statements None.
Other hazards  This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
General advice First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance.
If inhaled  After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
Eye Contact After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
Swallowed If swallowed: give water to drink (two glasses at most). Seek medical advice immediately. In exceptional cases only, if medical care is not available within one hour, induce vomiting (only in persons who are wide awake and fully conscious), administer activated charcoal (20 - 40 g in a 10% slurry) and consult a doctor as quickly as possible.
Skin Contact In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
Inhalation Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. 
Ingestion Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms and effects, both acute and delaye The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed  No data available
Flammability                                                  Not flammable or combustible.
Flash Point Dry powder Dry sand
Suitable extinguishing media Carbon dioxide (CO2) Foam Dry powder
Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture  Carbon oxides Nitrogen oxides (NOx) Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire.
Further information Remove container from danger zone and cool with water. Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Hazardous combustion
products
Hazardous decomposition products formed under fire conditions. - Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Protective Equipment Use personal protective equipment.
Specific Hazards Arising from the Chemical Oxides of phosphorus Sodium oxides Not combustible. Fire may cause evolution of: Oxides of phosphorus Ambient fire may liberate hazardous vapours.
Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8.
Spillage Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal.
Enviromental Precaution Do not let product enter drains.
Methods and materials for
containment and cleaning
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area.
Advice on safe handling  Work under hood. Do not inhale substance/mixture.
Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge.
Incompatible materials  Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. 
Hygiene measures Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2.
Precautions for     safe handling Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Storage conditions Tightly closed. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons. Light sensitive. Store under inert gas. Air sensitive.
Storage class Storage class (TRGS 510): 6.1A: Combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials
Specific end     use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
Handling Keep away from heat. Keep away from sources of ignition. Keep away from combustible material.. Empty containers pose a fire risk, evaporate the residue under a fume hood. Ground all equipment containing material. Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as reducing agents, combustible materials, organic materials, metals
Advice on general occupational hygiene Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance.
Requirements for storage  Keep in cool and store under shade. 
Exposure controls  Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. 
Control parameters Ingredients with workplace control parameters Contains no substances with occupational exposure limit values.
Engineering Control Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Skin      Protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: Viton® Minimum layer thickness: 0,7 mm Break through time: 480 min Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M)This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: butyl-rubber Minimum layer thickness: 0,7 mm Break through time: 30 min Material tested:Butoject® (KCL 898)
Body Protection Protective clothing
Respiratory protection Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Hygiene measures Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product.
Control of    environmental exposure Do not let product enter drains.
Physical state Clear, liquid
Colour Light yellow
Odour Characteristic
Odor Threshold Not Applicable
pH ca.7,4 at 20 °C Aqueous solution
Melting Point -28 °C
Boiling Point 200,2 °C at 1.013 hPa - (ECHA)
Flash Point 85 °C - closed cup
Evaporation Rate Not Applicable
Flammability (solid, gas) No data available
Explosive limits No Data Available
Lower flammability or explosive limits 1,5 %(V)
Autoignition temperature 480 °C at 1.013 hPa
Decomposition temperature  No data available
Vapour pressure 0,35 hPa at 25 °C
Density No data available
Relative Vapour Density 3,7 - (Air = 1.0)
Freezing point  No data available 
Specific Gravity No data available 
Partition coefficient log Pow: 1,4 at 24,5 °C
Explosive properties No data available 
Solubility 16,6 g/l at 20 °C
Ignition temperature No information available.
Particle characteristics No data available 
Reactivity                        Forms explosive mixtures with air on intense heating. A range from approx. 15 Kelvin below the flash point is to be rated as critical.
Stability The product is chemically stable under standard ambient conditions (room temperature) .
Possibility of hazardous reactions Risk of ignition or formation of inflammable gases or vapours with: acids
Conditions to avoid Air Strong heating.
Incompatible materials Various plastics                          
Hazardous decomposition products In the event of fire: see section 5
Acute toxicity  LD50 Oral - Rat - male - 750 mg/kg (OECD Test Guideline 401) LC50 Inhalation - Rat - male - 4 h - 3,79 mg/l - vapor (OECD Test Guideline 403) LD50 Dermal - Rabbit - male - 3.250 mg/kg Remarks: (ECHA)
Skin corrosion/irritation Skin - Rabbit Result: Irritations - 24 h (Draize Test)
Serious eye      damage/eye       irritation  Eyes - Rabbit Result: Eye irritation (Draize Test)
Respiratory or skin    sensitization  Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) The value is given in analogy to the following substances: p-toluidine
Toxic Effects on         Human May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer).
Carcinogenicity Presumed to have carcinogenic potential for humans
Germ cell        mutagenicity  Test Type: sister chromatid exchange assay Test system: Chinese hamster ovary cells Metabolic activation: with and without metabolic activation Result: positive Remarks: (National Toxicology Program) Test Type: In vitro mammalian cell gene mutation test Test system: Chinese hamster lung cells Metabolic activation: with and without metabolic activation Result: positive Remarks: (ECHA) Test Type: In vivo micronucleus test Species: Rat Cell type: Bone marrow Application Route: Intraperitoneal injection Result: positive Remarks: (National Toxicology Program)
Reproductive toxicity  No data available
Specific target organ toxicity - single      exposure No data available
Special Remarks on other Toxi  Effects on Humans Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin sensitization, an allergic reation, which becomes evident upon re-exposure to this material. Eyes: Causes eye irritation. Ingestion: Causes gastrointestinal (digestive) tract irritation with nausea, vomiting, and diarrhea. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May cause chemical pneumonitis and pulmonary edema, inflammation, edema of bronchi and larynx. Chronic Potential Health Effects: Repeated or prolonged skin exposure may cause allergic reactions in sensitive individuals. Repeated or prolonged exposure by inhalation may affect respiration and metabolism.
Endocrine disrupting properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: XU2975000 Absorption into the body leads to the formation of methemoglobin which in sufficient concentration causes cyanosis. Onset may be delayed 2 to 4 hours or longer., To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Bioaccumulative potential Bioaccumulation Cyprinus carpio (Carp) - 28 d - 0,1 mg/l(2-Toluidine) Bioconcentration factor (BCF): < 1,3
Persistence and          degradability Biodegradability aerobic - Exposure time 28 d Result: 88 - 90 % - Readily biodegradable. (OECD Test Guideline 301A)
Toxicity to fish  Semi-static test LC50 - Oncorhynchus mykiss (rainbow trout) - 0,154 mg/l - 96 h (OECD Test Guideline 203) Remarks: (referred to the cation)
Toxicity to daphnia and other aquatic invertebrates Flow-through test NOEC - Daphnia magna (Water flea) - 0,013 mg/l - 21 d (OECD Test Guideline 211)
Toxicity to algae Static test EC50 - Pseudokirchneriella subcapitata (green algae) - 30,9 mg/l - 72 h (OECD Test Guideline 201)
Toxicity to bacteria  Remarks: (ECHA) (2-Toluidine)
Mobility in soil No Information available
Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Endocrine disrupting       properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Other adverse effects Discharge into the environment must be avoided.
Disposal methods Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging Dispose of as unused product.
Waste treatment      Method See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
UN number ADR/RID:    1708           IMDG:    1708        IATA:  1708
UN proper shipping name              

ADR/RID:TOLUIDINES, LIQUID

IMDG: TOLUIDINES, LIQUID

IATA:  TOLUIDINES, LIQUID

Transport hazard class(es) ADR/RID:  6.1              IMDG:      6.1         IATA: 6.1
Packaging group ADR/RID:    II            IMDG:         II         IATA: II
Environmental hazards ADR/RID: yes           IMDG:      yes          IATA: NO
Further information Not classified as dangerous in the meaning of transport regulations.
Authorisations and/or restrictions on use REACH - Candidate List of Substances of Very High Concern for Authorisation (Article 59). : 2-Toluidine REACH - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles (Annex XVII) : 2-Toluidine
Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations specific for the product in question European Inventory of Existing Commercial Chemical Substances (EINECS) -Listed.EC Inventory Listed. United States Toxic Substances Control Act (TSCA) Inventory- Listed. China Catalog of Hazardous chemicals 2015 Not- Listed. New Zealand Inventory of Chemicals (NZIoC)Listed. PICCS -Listed. Vietnam National Chemical Inventory -Listed. IECSC Listed. Korea Existing Chemicals List (KECL) -Listed.
National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. : ACUTE TOXIC : ENVIRONMENTAL HAZARDS
Other regulations Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work.
Chemical Safety Assessment For this product a chemical safety assessment was not carried out.
Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

The Orthotolidine Reagent for Free Chlorine in Water manufacturer and supplier in Mumbai, Kandla, Kolkata, Haldia, Chennai, Visakhapatnam, Gangavaram, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi.

Our stock points and branches