pH Correction Media
- Part number
- RXSOL-43-8109-025
- Category
- Cooling Water Chemical
- Brand
- RXSOL
Overview
pH Correction Media is a natural, reactive limestone-based filtration medium designed to neutralise acidic and aggressive water. It increases pH by converting free CO₂ into bicarbonate while releasing calcium to stabilise water chemistry. The media also supports the removal of iron during normal filtration. It gradually dissolves during use, ensuring continuous and controlled pH adjustment.
Applications
Areas of Application of pH Media
- Groundwater and borewell treatment
- Industrial water pretreatment
- Reverse osmosis and demineralisation pretreatment
- Cooling and boiler make-up water pretreatment
- Small community and packaged water treatment plants
Dosage and directions
- Raw water acidity
- CO₂ content
- Operating flow rate
- Required pH increase
- Partial refilling is normally sufficient during routine maintenance.
Characteristics and notes
- Raises pH and alkalinity by neutralising free carbon dioxide
- Increases calcium hardness and reduces corrosivity of treated water
- Supports iron removal during filtration
- Reactive media that self-consumes and requires periodic replenishment
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-43-8109-025 |
| Product Type | pH Correction Media |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Fujairah, Muscat, Nairobi
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Non-hazardous proprietory blend of alkaline pH builder granules and powders.
| Eyes contact | irritant |
| Skin contact | irritant |
|
Inhalation |
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
|
Eye Contact |
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. WARM water MUST be used. Get medical attention. |
|
Skin Contact |
Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. |
|
Serious Skin Contact |
Not available. |
|
Inhalation |
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention. |
| Serious Inhalation | Not available. |
| Flammability of the Product | Non-flammable. |
| Auto-Ignition Temperature | NA |
| Flash Points | NA |
| Flammable Limits | NA |
| Products of Combustion | NA |
| Fire Hazards in Presence of Various Substances | NA |
| Risks of explosion of the product in presence of mechanical impact | Not available. |
| Risks of explosion of the product in presence of static discharge | Not available. |
| Fire Fighting Media and Instructions | Not applicable |
| Special Remarks on Fire Hazards | Will ignite and burn fiercely in contact with fluorine |
| Special Remarks on Explosion Hazards | When a mixture of calcium carbonate and magnesium is heated in a current of hydrogen, a violent explosion occurs. |
|
Small Spill |
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. |
|
Large Spill |
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities. |
|
Precautions |
Keep away from incompatibles such as oxidizing agents, acids. |
| Storage | Keep container tightly closed. Keep container in a cool, well-ventilated area. Hygroscopic |
|
Precautions |
Keep away from incompatibles such as oxidizing agents, acids. |
| Storage |
Keep container tightly closed. Keep container in a cooEngineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommendedexposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminantsbelow the exposure limit. |
| Personal Protection |
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves. |
| Personal Protection in Case of a Large Spill | Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product. |
| Physical state and appearance | Solid. (Powdered solid.) |
| Odor | Odorless. |
| Taste | Chalky |
| Molecular Weight | 100.09 g/mole |
| Color | White. |
| pH (1% soln/water) | Not available. |
| Boiling Point | Not available. |
| Melting Point | 825°C (1517°F) |
| Critical Temperature | Not available. |
| Specific Gravity | 2.8 (Water = 1) |
| Vapor Pressure | Not applicable. |
| Vapor Density | Not available. |
| Volatility | Not available. |
| Odor Threshold | Not available. |
| Water/Oil Dist. Coeff. | Not available. |
| Ionicity (in Water) | Not available. |
| Dispersion Properties | Not available. |
| Solubility | Very slightly soluble in cold water. Soluble in dilute acid. Insoluble in alcohol. |
|
Stability |
The product is stable. |
|
Instability Temperature |
Not available. |
|
Conditions of Instability |
Incompatible Materials |
|
Incompatibility with various substances |
Reactive with oxidizing agents, acids. |
|
Corrosivity |
Non-corrosive in presence of glass. |
| Special Remarks on Reactivity | Hygroscopic. Will ignite and burn fiercely in contact with fluorine. Incompatible with acids, alum, ammonium salts, mercury + hydrogen, aluminum and magnesium |
| Special Remarks on Corrosivity | Not available. |
| Polymerization | Will not occur. |
| Routes of Entry |
Inhalation. Ingestion. |
| Special Remarks on Toxicity to Animals | Not available. |
| Special Remarks on Chronic Effects on Humans: | |
| Acute Potential Health Effects: | |
| Skin | Causes skin irritation. |
| Eyes | Dust causes eye irritation. |
| Inhalation | Excessive inhalation causes respiratory tract and mucous membrane irritation. Low hazard for usual industrial handling. |
| Ecotoxicity | Not available |
| BOD5 and COD | Not available. |
| Products of Biodegradation | Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. |
| Toxicity of the Products of Biodegradation | The product itself and its products of degradation are not toxic. |
| Special Remarks on the Products of Biodegradation | Not available. |
|
Waste disposal |
Waste must be disposed of in accordance with federal, state and local environmental control regulations. |
| Identification | Not applicable. |
| Special Provisions for Transport | Not applicable. |
NA
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall RX MARINE INTERNATIONAL be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX MARINE INTERNATIONAL has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Calcium Carbonate manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Calcium Carbonate at a competitive price from us. We have ready stock of Calcium Carbonate in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
