Your shopping cart is empty.
Product Code: RXSOL-26-3107-025
|
Physical
Appearance: Dark grey/black powder |
Chemical
Type: Charcoal |
Product Code: RXSOL-22-2025-220
Use a strainer at the pump stack when circulating any solution.
Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).
Product Code: RXSOL-10-3245-025
Product Code: RXSOL-10-3246-025
Product Code: RXSOL-10-3247-025
Product Code: RXSOL-19-1540-252
Product Code: RXSOL-33-3352-025
Product Code: RXSOL-28-7222-025
Physical Properties:
| Melting Point | 17-19 °C (lit.) |
| Boiling Point | 167 °C/10 mmHg (lit.) |
| Density | 1.475-1.485 g/mL at 20 °C 1.481 g/mL at 25 °C (lit.) |
| Vapour density | 3.3 (vs air) |
| Vapour Pressure | 1 mm Hg ( 20 °C) |
| Refractive index |
n |
| Flash Point | >230 °F |
| Storage temprature | 2-8°C |
| Solublity | Water soluble1,000 g/L at 20°C |
| pKa | -2.6(at 25℃) |
| form | Solution |
| Colour | Brown |
| Specific gravity | 1.48 (18/4℃) |
| Water solublity | Miscible with water. Slightly miscible with benzene and toluene. Immiscible with paraffins. |
Product Code: RXSOL-33-3352-210
| Form | : Liquid |
| Colour | : Slight |
| pH | : 5.0 – 7.0 |
| Relative density | : 1.20 |
| Water solubility | : Miscible in water |
Product Code: RXSOL-15-1663-025
| Product Name RXSOL-15-1003-925 | ||
| Active Mater | 93-98% | |
| Consistency | Powder | |
| Emulsifying Property | Good for emulsification of Oils , Gum , Wax, Carbon Greases , Polymer & Solvents , | |
| Wetting Property | Good Wetting & Emulsifying Property | |
| pH | Alkaline 10-11 | |
| Boiling Point | Powder form – No boiling point | |
| Melting Point | Powder form – No melting point | |
| Colour | Pale Yellow | |
| Appearance | White Powder | |
| Odour | Characteristic | |
| Moisture | 0.5 % (max) | |
| Density | In g/cm3 at 15°C: 1.06 | |
| Flammability | Non flammable - will give off poisonous gas in a fire. | |
| Compatibility | ||
| Metal | No known effect | |
| Rubber | May swell | |
| Synthetic rubber | May swell | |
| PACKAGING | Order No | Size (in Kg) |
| RXSOL-15-1003-925 | 5,25 | |
|
Auto Flammability: Nil
Explosive Properties: Non-explosive
Oxidizing Properties: Non-oxidising
Solubility:Water: Soluble
|
Vapour Pressure: at 20 degrees C - 29.9 mbar
Density: (Air = 1) = > 1.0
Solubility:Solvent: Insoluble
|
Solubility:Coefficient: N/A
Neurotoxicity: Slightly Toxic LD50 0.5 – 5g/kg
|
Product Code: RXSOL-42-1524-030
| Solubility (10 % Aquous Soln) | V. S. Hazy to clear solution. |
| pH Value of 5% Solution | 3.5 to 4.5 |
| Specific Gravity @ 25° C | 1.310 – 1.370 |
| Density, lbs/gal @ 25° C | 10.9 - 11.3 |
| Description | Oxygen Scavenger for Boiler |
| Standard Packing | 30 Kg / 50 Kg. / 250 kg HM HDPE Barrel |
The most common oxygen scavengers in oilfield production are sodium bisulfite (SBS) and ammonium bisulfite (ABS). Ammonium bisulfite is more water soluble than sodium bisulfite and typically react with oxygen faster. However, ammonium in the ammonium bisulfite can promote bacteria growth.
Being a salt of a weak acid and a strong base, sodium bisulfite forms a significantly basic aqueous solution whereas ammonium bisulfite is only slightly basic at around pH 8. As a rule of thumb, 60ppm of 65wt% ammonium bisulfite is required to reduce the oxygen concentration in water from 9ppm to 50ppb.
The reaction of bisulfite with oxygen is typically faster at higher temperatures and can be facilitated by transition metal ion catalysts, e.g. Cobalt.
The most common applications of oxygen scavenger in oil and gas production are for seawater injection facilities, hydro-testing, and acid stimulation
It is used to arrest oxygen in sea water
It removes Entrapped Oxygen and thus reduces Corrosion
In Oil Drilling Chemicals
Product Code: RXSOL-19-1465-025
